1. Safety information
Please carefully read thoroughly all of the instructions before installing or operating the unit.
Following safety symbols are very important,please carefully read and always obey all safety symbols.
It maybe cause that people is injured if not obey the instructions.
It maybe cause that people is seriously injured or killed if not obey the
instructions.
It maybe cause that people is seriously injured or killed immediately if not
obey the instructions.
The unit must be earthed effectively and reliably.
A residual current operated circuit-breaker R(CCB)must be installed adjacent to the power supply.
Do not remove,cover or deface any permanent instructions,labels or the data labels from either the outside of the unit
or inside of unit panels.
Only the qualified person can perform the installation of this unit in accordance with local national regulations and this
installation manual.Improper installation may result in water leakage,electric shock or fire.
Only the qualified person can relocate,repair and maintain the unit.Improper installation and repairing may result in
water leakage,electric shock or fire.
Electric connection work should obey the instructions of local power company,local electric utility and this manual.
Never use the wire and fuse with wrong rated current,otherwise unit may breakdown and cause fire furthermore. Do
not insert fingers,rods or other objects into the air inlet or outlet.When the fan is rotating at high speed,it will cause
injury.
Never use a flammable spray such as hair spray,lacquer paint near the unit,because it may cause a fire.
The heat pump unit is not intended for use by persons (including children) with reduced physical,sensory or mental
capabilities,or lack of experience and knowledge,unless they have been given supervision or instruction concerning
use of the unit by a person responsible for their safety.Children should be supervised to ensure that they do not play
with the unit.
Once the power supply cord is damaged,it must be replaced by service agent or the manufacturer or a similarly
qualified person.
Do not dispose this unit as unsorted municipal waste.Collection of such waste separately for special treatment is
necessary.
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection
facilities. Please contact local government for information regarding the collection systems
available.
If electrical appliances are disposed of the landfills or dumps,hazardous substances can leak into
the groundwater and get into the food chain,damaging your health and well-being.
The ground wire’s pole of socket must be grounded well,make sure that power supply socket and plug are enough
dry and connected well.
To check the power supply socket and plug are qualified -
Step 1:Turn on the power supply.
Step 2:Keep the unit running for a half hour.
Step 3:Turn off the power supply and plug out.
Step 4:Check whether the socket and plug is hot or not.
