EnGenius ECB9500 Bedienungsanleitung

Quick Start Guide

802.11n Wireless Client Bridge, Access Point & Re eater

Quick Start Guide v.3.0

Refer to User’s Manual for complete instructions 1

EC 9500 is a powerful wireless enterprise 2.4GHz 11N

Client ride, Access Point, and WDS/Repeater that

supports 7 multi-functions for operation in every

working environment.

EC 9500 is a Wireless Network device that delivers up

to 6x faster speeds and 7x extended coverage than

traditional 802.11g devices. EC 9500 supports

networks with superior throughput, performance and

an unparalleled wireless range. The WPS function

simplifies security by allowing wireless connectivity

with a push button.

The high performance, long range, and secure

EC 9500 is well suited for any time of wireless

environment.

This Guide will assist you in setting up the Access Point as quickly as possible and with the

least effort.

Hardware Installation

1. Place the unit in an appropriate

place after conducting a site survey.

2. Plug one end of the Ethernet cable

into the RJ-45 port of the device and

another end into your PC/Notebook.

3. Insert the DC-inlet of the power

adapter into the port labeled “DC-IN”

and the other end into the power

socket on the wall.

IP Address Configuration

The default IP address of the device is

192.168.1.2 (default mode: Client

Bridge). In order to log into this device,

you must first configure the TCP/IP

settings of your PC/Notebook.

1. In the control panel, double click

Network Connections and then

double click on the connection of

your Network Interface Card (NIC).

You will then see the following

screen.

2. Select Internet Protocol (TCP/IP)

and then click on the Pro erties

button. This will allow you to

configure the TCP/IP settings of your

PC/Notebook.

3. Select Use the following IP

Address radio button and then enter

the IP address (192.168.1.21) and

subnet mask (255.255.255.0).

Ensure that the IP address and

subnet mask are on the same

subnet as the device.

4. Click on the OK button to close this

window, and once again to close

LAN properties window.

Logging In

1. To configure the device through the

web-browser, enter the IP address

of the ridge (default: 192.168.1.2)

into the address bar of the

web-browser and press Enter.

2. After connecting to the IP address,

the web-browser will display the

default User Name and Password,

and then click on the Login button.

Administration

1. Click on the Admin link under the

Tools menu. This option allows you

to create a new password for the

device. For security it is highly

recommended for security reasons.

Quick Start Guide

Wireless Access Point & Client Bridge

Quick Start Guide v.1.0

Refer to User’s Manual for complete instructions 2

2. Old Password: Specify the old

password into the first field. The

default password is admin.

3. New Password: Specify a new

password into this field and then

re-type the password into the

Re-ty e New Password field. Then

click on the A ly button.

4. Click on the A ly button to save

the changes.

O erating Mode

1. Click on the General link on the

Wireless drop-down menu.

2. O erating Mode: Select an

operating mode from the drop-down

list. Options available are Access

Point, Client ridge, WDS ridge

and Repeater mode.

3. Refer to the User’s Manual for a

detailed explanation of each

operating mode.

4. Country/Region: Select the region

from the drop-down list.

5. Click on the A ly button to save

the changes.

IP and DHCP Settings

1. Click on the LAN link on the

Network drop-down menu. This

feature allows you to configure

the LAN interface using a static IP

address or as a DHCP client.

You may also configure the

DHCP server settings through this

page. This IP address is also

used to access the web-based

interface.

2. Bridge Ty e: Select Dynamic IP

if the Access Point is connected to

a DHCP server. This will allow the

Access Point to pass IP

addresses to the clients

associated with it. You may select

Static IP Address if you would

like the device to use a static IP

address. In this case, you would

be required to specify an IP

address, subnet mask, and

default gateway IP address.

3. IP Address: Specify an IP

address.

4. IP Subnet Mask: Specify the

subnet mask for the IP address.

5. 802.1d S anning Tree: Choose

to enable or disable the spanning

tree protocol.

6. DHCP Server: Choose to enable

or disable the DHCP server.

7. Lease Time: Select a lease time

from the drop-down list.

8. Start IP: Specify the starting IP

address of the DHCP range.

9. End IP: Specify the ending IP

address of the DHCP range.

10. Domain Name: Specify a domain

name.

11. Click on the A ly button to save

the changes.

Note: If you change the IP address here,

you may need to adjust your PC’s

network settings to access the network

again.

Wireless Network & Security

1. Click on the General link on the

Wireless drop-down menu. This

feature allows you to configure

the wireless mode, channel,

SSID, and security settings.

2. Radio: Choose to enable or

disable the wireless radio.

3. Mode: The current wireless mode

is displayed in this field.

4. Band: Depending on the type of

wireless clients that are

connected to the network, you

may select B, G, or

B+G+N-mixed.

5. Enable SSID#: Select the SSID

profile number from the

drop-down list.

6. SSID: The SSID is a unique

named shared amongst all the

points of the wireless network.

The SSID must be identical on all

points of the wireless network and

cannot exceed 32 characters.

7. Auto Channel: Choose Enable

to have the device automatically

select the cleanest RF channel.

8. Channel: Select a channel from

the drop-down list. The channels

available are based on the

country’s regulation.

9. Click on the A ly button to save

the changes.

Andere Handbücher für ECB9500

Andere EnGenius Drahtloser Zugangspunkt Handbücher

EnGenius

EnGenius EAP350 Bedienungsanleitung

EnGenius

EnGenius M36 Bedienungsanleitung

EnGenius

EnGenius EOC1650 Bedienungsanleitung

EnGenius

EnGenius ENS500EXT-AC Bedienungsanleitung

EnGenius

EnGenius ENS200EXT Bedienungsanleitung

EnGenius

EnGenius EOA7530 Bedienungsanleitung

EnGenius

EnGenius EWS330AP Bedienungsanleitung

EnGenius

EnGenius ENH202 Bedienungsanleitung

EnGenius

EnGenius ENS200 Bedienungsanleitung

EnGenius

EnGenius EnStation 6 Bedienungsanleitung

EnGenius

EnGenius User Guide Bedienungsanleitung

EnGenius

EnGenius EAP1750 Bedienungsanleitung

EnGenius

EnGenius ENS200 Bedienungsanleitung

EnGenius

EnGenius M2000 Bedienungsanleitung

EnGenius

EnGenius ECB600 Bedienungsanleitung

EnGenius

EnGenius ECB600 Bedienungsanleitung

EnGenius

EnGenius EAP1750H Bedienungsanleitung

EnGenius

EnGenius ECB3500 Bedienungsanleitung

EnGenius

EnGenius EWS356-FIT Bedienungsanleitung

EnGenius

EnGenius EOC-2610 Bedienungsanleitung

EnGenius

EnGenius ENS200 Bedienungsanleitung

EnGenius

EnGenius ENS500 Bedienungsanleitung

EnGenius

EnGenius ENH202 Bedienungsanleitung

EnGenius

EnGenius ECB1221R Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung