EnGenius ECB9500 Bedienungsanleitung

Quick Start Guide

802.11n Wireless Client Bridge, Access Point & Repeater

ECB9500 is a powerful wireless enterprise 2.4GHz 11N

Client Bride, Access Point, and WDS/Repeater that

supports 7 multi-functions for operation in every

working environment.

ECB9500 is a Wireless Network device that delivers up

to 6x faster speeds and 7x extended coverage than

traditional 802.11g devices. ECB9500 supports

networks with superior throughput, performance and

an unparalleled wireless range. The WPS function

simplifies security by allowing wireless connectivity

with a push button.

The high performance, long range, and secure

ECB9500 is well suited for any time of wireless

environment.

This Guide will assist you in setting up the Access Point as quickly as possible and with the

least effort.

Hardware Installation

1. Place the unit in an appropriate place

after conducting a site survey.

2. Plug one end of the Ethernet cable into

the RJ-45 port of the device and another

end into your PC/Notebook.

3. Insert the DC-inlet of the power adapter

into the port labeled “DC-IN” and the

other end into the power socket on the

wall.

Quick Start Guide v.1.0

Refer to User’s Manual for complete instructions 1

IP Address Configuration

The default IP address of the device is

192.168.0.1 (Client Bridge mode).In order

to log into this device, you must first configure

the TCP/IP settings of your PC/Notebook.

1. In the control panel, double click

Network Connections and then double

click on the connection of your Network

Interface Card (NIC). You will then see

the following screen.

2. Select Internet Protocol (TCP/IP) and

then click on the Properties button. This

will allow you to configure the TCP/IP

settings of your PC/Notebook.

3. Select Use the following IP Address

radio button and then enter the IP

address (192.168.0.21) and subnet

mask (255.255.255.0). Ensure that the

IP address and subnet mask are on the

same subnet as the device.

4. Click on the OK button to close this

window, and once again to close LAN

properties window.

Logging In

1. To configure the device through the

web-browser, enter the IP address of the

Bridge (default: 192.168.0.1) into the

address bar of the web-browser and

press Enter.

2. After connecting to the IP address, the

web-browser will display the login page.

Specify admin as the default User

Name and Password, and then click on

the Login button.

Administration

1. Click on the Admin link under the Tools

menu. This option allows you to create a

new password for the device. For

security it is highly recommended for

security reasons.

2. Old Password: Specify the old

password into the first field. The default

password is admin.

3. New Password: Specify a new

password into this field and then re-type

Quick Start Guide

802.11n Wireless Client Bridge, Access Point & Repeater

Quick Start Guide v.1.0

Refer to User’s Manual for complete instructions 2

the password into the Re-type New

Password field. Then click on the Apply

button.

4. Click on the Apply button to save the

changes.

Operating Mode

1. Click on the General link on the

Wireless drop-down menu.

2. Operating Mode: Select an operating

mode from the drop-down list. Options

available are Access Point, Client

Bridge, WDS Bridge and Repeater

mode.

3. Refer to the User’s Manual for a detailed

explanation of each operating mode.

4. Country/Region: Select the region from

the drop-down list.

5. Click on the Apply button to save the

changes.

IP and DHCP Settings

1. Click on the LAN link on the Network

drop-down menu. This feature allows

you to configure the LAN interface

using a static IP address or as a

DHCP client. You may also

configure the DHCP server settings

through this page. This IP address is

also used to access the web-based

interface.

2. Bridge Type: Select Dynamic IP if

the Access Point is connected to a

DHCP server. This will allow the

Access Point to pass IP addresses to

the clients associated with it. You may

select Static IP Address if you would

like the device to use a static IP

address. In this case, you would be

required to specify an IP address,

subnet mask, and default gateway IP

address.

3. IP Address: Specify an IP address.

4. IP Subnet Mask: Specify the subnet

mask for the IP address.

5. 802.1d Spanning Tree: Choose to

enable or disable the spanning tree

protocol.

6. DHCP Server: Choose to enable or

disable the DHCP server.

7. Lease Time: Select a lease time from

the drop-down list.

8. Start IP: Specify the starting IP

address of the DHCP range.

9. End IP: Specify the ending IP

address of the DHCP range.

10. Domain Name: Specify a domain

name.

11. Click on the Apply button to save the

changes.

Note: If you change the IP address here, you

may need to adjust your PC’s network

settings to access the network again.

Wireless Network & Security

1. Click on the General link on the

Wireless drop-down menu. This

feature allows you to configure the

wireless mode, channel, SSID, and

security settings.

2. Radio: Choose to enable or disable

the wireless radio.

3. Mode: The current wireless mode is

displayed in this field.

4. Band: Depending on the type of

wireless clients that are connected to

the network, you may select B, G, or

B+G+N-mixed.

5. Enable SSID#: Select the SSID

profile number from the drop-down

list.

6. SSID: The SSID is a unique named

shared amongst all the points of the

wireless network. The SSID must be

identical on all points of the wireless

network and cannot exceed 32

characters.

7. Auto Channel: Choose Enable to

have the device automatically select

the cleanest RF channel.

8. Channel: Select a channel from the

drop-down list. The channels

available are based on the country’s

regulation.

9. Click on the Apply button to save the

changes.

Andere Handbücher für ECB9500

Inhaltsverzeichnis

Andere EnGenius Drahtloser Zugangspunkt Handbücher

EnGenius

EnGenius ENH200EXT Bedienungsanleitung

EnGenius

EnGenius EnStation 6 Bedienungsanleitung

EnGenius

EnGenius EOC5510 Bedienungsanleitung

EnGenius

EnGenius EAP1750H Bedienungsanleitung

EnGenius

EnGenius ENH Series Bedienungsanleitung

EnGenius

EnGenius EAP1200H Bedienungsanleitung

EnGenius

EnGenius ENH700EXT Bedienungsanleitung

EnGenius

EnGenius EWS510AP Bedienungsanleitung

EnGenius

EnGenius ENS200 Bedienungsanleitung

EnGenius

EnGenius ENS200 Bedienungsanleitung

EnGenius

EnGenius EOC5611P Bedienungsanleitung

EnGenius

EnGenius Neutron EWS320AP Bedienungsanleitung

EnGenius

EnGenius EAP900H Bedienungsanleitung

EnGenius

EnGenius ENH1750EXT Bedienungsanleitung

EnGenius

EnGenius EWS375-FIT Bedienungsanleitung

EnGenius

EnGenius EAP350 Bedienungsanleitung

EnGenius

EnGenius ECB1750 Bedienungsanleitung

EnGenius

EnGenius EOC5611P Bedienungsanleitung

EnGenius

EnGenius 11N Wireless Gigabit Multi-Function Client... Bedienungsanleitung

EnGenius

EnGenius EOC1650 Bedienungsanleitung

EnGenius

EnGenius ECB600 Bedienungsanleitung

EnGenius

EnGenius EAP9550 Bedienungsanleitung

EnGenius

EnGenius ECB9500 Bedienungsanleitung

EnGenius

EnGenius ECB600 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung