MAINTENANCE
TROUBLESHOOTING
CAUTION
REFRIGERATION SYSTEM
Note: tampering with the refrigeraon system in any way may void warranty.
WATER TEMPERATURE CONTROL SCREW - Located internally on the shelf, has
C to 10
BUBBLER STREAM ADJUSTMENT
Every 6 months or periodically as required, the appliance and its
surronding area should be inspected for water leaks, the bubblers
Every 12 months or as required, the bubbler stream height should
should be checked periodically and cleaned with a brush or vacuum
CLEANING
agents containing a corrosive acid, scouring agent or solvent
coated surfaces should only be cleaned with a cloth and clear water
• Mains Power Electrical Components.
safety and hygiene, access to the internal components of
this appliance is restricted to persons having knowledge and
•
• If the power supply cord is damaged, it must be replaced by
•
thermal cutout, this appliance must not be supplied through
•
•
• Do not use mechanical devices or other means to accelerate
•
ambient temperatures is again above 0°C and frozen unit
COMPONENTS
PROBLEM CAUSE RECTIFICATION
No water at outlets Connect and turn on water supply
Water frozen
Water not cooled Power is not connected
outlets
Bubbler stream is not adjusted Adjust bubbler stream
Water leaks at
outlets
Bubbler cartridge is damaged
Water tastes foul
Water in tank is stale Purge water in tank by running the bubbler for 5 minutes
HEX COVER NUT
PUSH BUTTON
CARTRIDGE
LOCKING RING
(RETAINING NUT)
CARTRIDGE
(BUB294)
SPOUT ASSEMBLY
BODY
FLOW
ADJUSTMENT
SCREW
IMAGE 6
