Epever MT92 Bedienungsanleitung
Remote Meter
USER MANUAL
MT92
Contents
1. Safety Instructions..........................................................................1
2. Overview ........................................................................................2
3. Appearance ....................................................................................3
4. Installation Instructions ...................................................................6
5. Button Instruction............................................................................7
6. Real-time Interface .........................................................................8
7. Setting Interface .............................................................................9
8. Error Codes....................................................................................12
9. Specifications .................................................................................14
10. Dimension ....................................................................................15
1
1. Safety Instructions
Thanks for selecting the MT series; please read this manual carefully before
using the product.
Please keep this manual for future reference.
When you receive the product, check whether there is any damage that
occurred in transportation. Contact the transportation company or our
company in time for any problem.
Please read this manual and safety information carefully before installing it.
Keep the product away from rain, exposure, severe dust, vibration,
corrosion, and intense electromagnetic interference.
Please avoid water and other liquids enter into the product.
There are no user-serviceable parts inside the product. Do not disassemble
or attempt to repair it.
2
2. Overview
MT92 is a new generation of remote meter based on the latest communication
protocol and voltage technical standards of the controller. It displays the real-
time parameters of the MSC-N series controllers on one screen. Supporting
parameter configuration by the button operations, which makes the product
suitable for different requirements.
Features
Dual interface design, friendly connect with different EPEVER devices
LCD screen, real-time dynamic display of system data
Visually error codes, timely notification of warnings and faults
Load ON/OFF button to control the load output directly
Simple installation and friendly operation interface
3
3. Appearance
Screw hole
LCD
UP/Setting button
Screw hole
Fault indicator(red)
Down/OK button
Load switch«
Working indicator(blue)
«In the real-time interface, long press for 5 seconds to turn on/off the
load 1; long press it again for 5 seconds to turn on/off the load 2.
4
Remote terminal
Speaker
Controller
terminal
Definition of the controller terminal/remote terminal:
0 A B +5V 0 A B +5V
5
Connect the MT92 with a controller
Connect the "controller terminal" of the MT92 and the RJ45 port of the
controller through an RS485 communication cable (included accessory,
model: CC-RJ45-3.18-150U).
Connect the MT92 with an auxiliary module
Connect the "remote terminal" of the MT92 and the auxiliary modules
such as the Bluetooth module/wireless module/BMS through an adapter
cable.
6
4. Installation Instructions
Surface mounting installation is recommended.
Step 1: Locate based on the installation size (91mm), and drill two screw holes
(no smaller than 77x52mm).
Step 2: Use two PWM3*10 screws to fix the remote meter.
Inhaltsverzeichnis
Andere Epever Messgerät Handbücher
Epever
Epever MT50 Bedienungsanleitung
Epever
Epever MT91 Bedienungsanleitung
Epever
Epever MT50 Bedienungsanleitung
Epever
Epever MT80 Bedienungsanleitung
Epever
Epever MT75 Bedienungsanleitung
Epever
Epever MT Series Bedienungsanleitung
Epever
Epever MT75 Bedienungsanleitung
Epever
Epever MT11 Bedienungsanleitung
