Epic EPTL09106.0 Bedienungsanleitung

Serial Number

Decal

Model No. EPTL09106.0

Serial No.

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

USER'S MANUAL

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete

customer satisfaction. If you

have questions, or if parts are

damaged or missing, PLEASE

CONTACT OUR CUSTOMER

SERVICE DEPARTMENT

DIRECTLY.

CALL TOLL-FREE:

1-866-997-6999

Mon.–Fri., 6 a.m.–6 p.m. MST

ON THE WEB:

www.iconservice.com

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: An EXPLODED DRAWING is attached in the center of this manual.

1. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

2. Use the treadmill only as described.

3. Place the treadmill on a level surface, with at

least eight feet of clearance behind it and two

feet on each side. Do not place the treadmill

on any surface that blocks air openings. To

protect the floor or carpet from damage, place

amat under the treadmill.

4. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

6. Keep children under the age of 12 and pets

away from the treadmill at all times.

7. The treadmill should be used only by persons

weighing 300 pounds or less.

8. Never allow more than one person on the

treadmill at a time.

9. Wear appropriate exercise clothes when

using the treadmill. Do not wear loose clothes

that could become caught in the treadmill.

Athletic support clothes are recommended for

both men and women.

Always wear athletic

shoes. Never use the treadmill with bare feet,

wearing only stockings, or in sandals.

10. When connecting the power cord (see page

12), plug the power cord into a surge sup-

pressor (not included) and plug the surge

suppressor into a grounded circuit capable of

carrying 15 or more amps. No other appliance

should be on the same circuit. Do not use an

extension cord.

11. Use only a single-outlet surge suppressor

that meets all of the specifications described

on page 12. To purchase a surge suppressor,

see your local EPIC dealer or call the toll-free

telephone number on the front cover of this

manual and order part number 146148, or see

your local electronics store.

12. Failure to use a properly functioning surge

suppressor could result in damage to the con-

trol system of the treadmill. If the control sys-

tem is damaged, the walking belt may change

speed, accelerate, or stop unexpectedly,

which may result in a fall and serious injury.

13. Keep the power cord and the surge suppres-

sor away from heated surfaces.

14. Never move the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See TROU-

BLESHOOTING on page 26 if the treadmill is

not working properly.)

15. Read, understand, and test the emergency

stop procedure before using the treadmill (see

HOW TO TURN ON THE POWER on page 14).

16. Never start the treadmill while you are stand-

ing on the walking belt. Always hold the

handrails while using the treadmill.

17. The treadmill is capable of high speeds.

Adjust the speed in small increments to avoid

sudden jumps in speed.

18. The pulse sensor is not a medical device.

Various factors, including the user's move-

ment, may affect the accuracy of heart rate

readings. The pulse sensor is intended only

as an exercise aid in determining heart rate

trends in general.

19. Never leave the treadmill unattended while it

is running. Always remove the key, unplug

the power cord, and switch the reset/off cir-

cuit breaker to the off position when the

treadmill is not in use. (See the drawing on

page 6 for the location of the circuit breaker.)

WARNING: Toreduce the risk of burns, fire, electric shock, or injury to persons, read the

following important precautions and information before operating the treadmill.

IMPORTANT PRECAUTIONS

20. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 7, and HOW TO FOLD

AND MOVE THE TREADMILL on page 24.)

You must be able to safely lift 45 pounds (20

kg) to raise, lower, or move the treadmill.

21. When folding or moving the treadmill, make

sure that the storage latch is fully closed.

22. Inspect and properly tighten all parts of the

treadmill regularly.

23. Never insert any object into any opening.

24. DANGER: Always unplug the power

cord immediately after use, before cleaning the

treadmill, and before performing the mainte-

nance and adjustment procedures described in

this manual. Never remove the motor hood un-

less instructed to do so by an authorized ser-

vice representative. Servicing other than the

procedures in this manual should be performed

by an authorized service representative only.

25. The treadmill is intended for in-home use

only. Do not use the treadmill in any

commercial, rental, or institutional setting.

26. If an outside antenna or cable system is con-

nected, be sure that the antenna or cable sys-

tem is grounded to provide some protection

against voltage surges and built-up static

charges. Section 810 of the National

Electrical Code, ANSI/NFPA No. 70-1984, pro-

vides information with respect to proper

grounding of the mast and supporting struc-

ture, grounding of the lead-in wire to an an-

tenna discharge unit, size of grounding con-

ductors, location of antenna discharge unit,

connection to grounding electrodes, and re-

quirements for the grounding electrode.

27. An outside antenna system should not be lo-

cated in the vicinity of overhead power lines

orother electric light or power circuits, or

where it can fall into such power lines or cir-

cuits. When installing an outside antenna sys-

tem, extreme care should be taken to keep

from touching such power lines or circuits, as

contact with them might be fatal.

28. To reduce the risk of electric shock, do not re-

move the cover or the back of the television.

There are no user serviceable parts inside.

Refer servicing to qualified service personnel.

29. Upon completion of any service or repairs to

the treadmill or the television, ask the service

technician to perform safety checks to con-

firm that the unit is in proper operating condi-

tion.

•Use No. 10 AWG (5.3mm2)copper, No. 8

AWG (8.4mm2)aluminum, No. 17 AWG

(1.0mm2)copper-clad steel or bronze wire,

or larger as a ground wire.

•Secure an antenna lead-in and ground wires

to the house with stand-off insulators

spaced from 4 to 6 feet (1.22 to 1.83m)

apart.

•Mount an antenna discharge unit as close

as possible to where the lead-in enters the

house.

•Use a jumper wire not smaller than No. 6

AWG (13.3mm2)copper, or the equivalent

when a separate antenna-grounding elec-

trode is used. See NEC Section 810-21 (j).

Note to CATV system installer: This reminder is

provided to call the CATV system installer’s at-

tention to Article 820-40 of the NEC that provides

guidelines for proper grounding and, in particu-

lar, specifies that the cable ground shall be con-

nected to the grounding system of the building,

as close to the point of cable entry as practical.

The decals shown here have been placed on the treadmill. If

adecal is missing, or if it is not legible, call the toll-free tele-

phone number on the front cover of this manual and order a

free replacement decal. Apply the decal in the location

shown.

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.

Read all instructions before using. ICON assumes no responsibility for personal injury or property

damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

Power Lines

Ground

Clamps

Ground

Clamps

Ground

Clamp

Bonding

Jumper

Standoff

Insulators

Antenna

Lead-in Wire

Ground Wire

Ground

Wire Antenna

Discharge Unit

To External Antenna

Terminal of Treadmill

Mast

Service

Entrance

Equipment

Power Service Grounding

Electrode System (e.g.

Interior Metal Water Pipe)

Service

Entrance

Conductors

Optional Antenna Grounding Electrode Driven 8

Feet (2.44m) Into The Earth (If Required By Local

Codes). See NEC Section 810–21 (f).

Thank you for selecting the revolutionary EPIC 475 MX

treadmill. The 475 MX treadmill offers an impressive

array of features designed to make your workouts at

home more enjoyable and effective. And when you’re

not exercising, the unique 475 MX treadmill can be

folded up, requiring less than half the floor space of

other treadmills.

For your benefit, read this manual carefully before

you use the treadmill. If you have questions after

reading this manual, please see the front cover of this

manual. To help us assist you, note the product model

number and serial number before calling. The model

number of the treadmill is EPTL09106.0. The serial

number can be found on a decal attached to the tread-

mill (see the front cover of this manual for the location).

Before reading further, please review the drawing

below and familiarize yourself with the labeled parts.

BEFORE YOU BEGIN

Handrail

Upright

Storage Latch

Key/Clip

Reset/Off

Circuit Breaker

Walking Belt

Cushioned Walking Platform

for maximum exercise comfort

Foot Rail

RIGHT SIDE

Rear Roller

Adjustment Bolts

Personal Television/Console Water Bottle Holder

(no bottle is included)

Fan

BACK

ASSEMBLY

Tohire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is

coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the

top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor-

mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild,

non-abrasive cleaner.

Assembly requires the included hex key and your own phillips screwdriver and wire

cutters .

Use the drawings below to identify the hardware used during assembly. Note: If a part is not in the parts bag,

check to see if it has been preattached to one of the parts to be assembled. To avoid damaging plastic

parts, do not use power tools for assembly.

1. Make sure that the power cord is unplugged.

With the help of a second person, carefully tip the

treadmill onto its left side as shown. Partially fold the

Frame (58) so the treadmill is more stable. Do not fully

fold the treadmill until it is completely assembled.

Attach four Base Pads (82) (only two are shown) to the

base of the Uprights (84) with four 1" Tek Screws (22).

Insert an Extension Leg (89) into the base of the Uprights

(84) as shown. Hold two Extension Leg Nuts (67) in the

bottom of the Extension Leg. Next, insert two Extension

Leg Bolts (65) with Star Washers (8) into the top of the

Extension Leg, and firmly tighten the Extension Leg Bolts

into the Extension Leg Nuts.

With the help of a second person, carefully tip the tread-

mill onto its other side. Attach the other Extension Leg

(not shown) as described above.

65 8

1" Tek Screw (22)–4

Star Washer (8)–8

Console Bolt (64)–4

Extension Leg Nut (67)–4 L

Extension Leg Bolt (65)–4

4. Insert the Console Wire Harness (78) and the TV cable

into the Uprights (84).

Set the console assembly on the Uprights (84). Be care-

ful to avoid pinching the Console Wire Harness (78)

and the TV cable. While a second person holds the con-

sole assembly, attach it with four Console Bolts (64) and

four Star Washers (8) as shown; start all four Console

Bolts and then firmly tighten them.

Console

Assembly

TV Cable

84 84

2. With the help of a second person, carefully raise the

Uprights (84) to a vertical position.

Have the second person hold the console assembly near

the Uprights (84) as shown. Look under the console as-

sembly and locate the Console Wire Harness (78).

Cut the plastic ties securing the Upright Wire Harness

(77) to the right Upright (84). Next, connect the Upright

Wire Harness to the Console Wire Harness (78). Make

sure to connect the connectors properly (see the

inset drawing). The connectors should slide together

easily and snap into place. If the connectors do not

slide together easily and snap into place, turn one con-

nector and then try again. IF THE CONNECTORS ARE

NOT CONNECTED PROPERLY, THE CONSOLE MAY

BE DAMAGED WHEN THE POWER IS TURNED ON.

Console

Assembly

3. Look under the console assembly and locate the TV

cable.

Cut the plastic ties securing the Upright TV Cable (104) to

the left Upright (84). Connect the Upright TV Cable to the

TV cable on the console assembly.

104

TV Cable

Console

Assembly

6. Place the treadmill in the storage position (see HOW TO

FOLD AND MOVE THE TREADMILL on page 24).

Next, place the cylinder end of the Gas Spring (92) near

the bracket on the base of the Uprights (84).

See the two small inset drawings. Using your fingernail

or the end of a screwdriver, press on the end of the

Spring Pin (25) to loosen it from the Gas Spring (92).

Next, rotate the Spring Pin and pull it out of the Gas

Spring. Be careful to avoid losing the Spring Pin.

Note: Extra Spring Pins are included.

See drawing 5a. Press the cylinder end of the Gas

Spring (92) onto the ball on the bracket. Next, insert the

end of the Spring Pin (25) into two of the small holes in

the end of the Gas Spring. Then, rotate the Spring Pin

until it clips onto the Gas Spring.

Bracket

Cylinder

Bracket

7. Raise the Gas Spring (92) to a vertical position. Remove

the Spring Pin (25) from the raised end of the Gas Spring

as described in step 6. If necessary, rotate the Gas

Spring to align the end of the Gas Spring with the ball on

the bracket on the Frame (58).

Next, press the Incline increase and decrease buttons on

the console until the ball on the bracket is aligned with

the end of the Gas Spring (92). Then, press the end of

the Gas Spring onto the ball. Note: It may be necessary

to press the end of the Gas Spring onto the ball while the

Frame (58) is moving.

See drawing 7a. Insert the Spring Pin (25) into the two

indicated small holes in the end of the Gas Spring (92).

Then, rotate the Spring Pin until it clips onto the Gas

Spring.

Press the Incline decrease button until the treadmill

is at the lowest incline level. Then, unplug the power

cord.

Holes

58 Bracket

5. Press the Latch Housing (73) into the left Upright (84).

Use a rubber mallet, if necessary, to fully insert the Latch

Housing.

Remove the knob from the pin. Make sure that the collar

and the spring are on the pin. (Note: If there are two col-

lars, place one on each side of the spring.) Next, insert

the pin into the Latch Housing (73). Then, tighten the

knob back onto the pin.

Plug in the power cord as described on page 12, and

turn on the power as described on page 14. Note: The

treadmill may automatically rise to the maximum incline

level and then return to the minimum level.

Spring

Collar

Knob

If you purchase the optional chest pulse sensor (see page 23), follow the steps below to install the receiver

included with the chest pulse sensor.

1. Make sure that the key is removed from the con-

sole and that the power cord is unplugged.

Remove the indicated Screws (3) from the back of the

Console Base (85).

2. Connect the wire on the receiver (A) to the indicated

wire on the Console (34). Hold the receiver so the

small cylinder is oriented as shown. Next, remove

the tape from the back of the receiver, and press the

receiver onto the Console Base (85) in the location

shown.

3. Make sure that no wires are pinched. Reattach the

Console (34) with the Screws (3). Discard the other

wires included with the receiver.

Wire

Small Cylinder

9. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear

plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread-

mill. Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used

to adjust the walking belt (see page 27).

8. Note the location of the 75 ohm antenna terminal on the

treadmill. For the television to operate properly, an an-

tenna, a CATV cable, or a VCR must be connected to the

75 ohm antenna terminal (see page 11).

75 Ohm Antenna

Terminal

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Epic Tretmühle Handbücher

Epic

Epic EPTL818040 Bedienungsanleitung

Epic

Epic 705treadmill Bedienungsanleitung

Epic

Epic CT 705 Bedienungsanleitung

Epic

Epic FMTL39940 Bedienungsanleitung

Epic

Epic 425 Mx Treadmill Bedienungsanleitung

Epic

Epic Tl 2710 Treadmill Bedienungsanleitung

Epic

Epic 400 Mx Treadmill Bedienungsanleitung

Epic

Epic 600 Mx Treadmill Bedienungsanleitung

Epic

Epic VIEW 550 EPTL09706.1 Bedienungsanleitung

Epic

Epic Epic TL2200 Bedienungsanleitung

Epic

Epic TREADMILL ECTL81804.2 Bedienungsanleitung

Epic

Epic 800mx Treadmill Bedienungsanleitung

Epic

Epic ECTL81804.1 Bedienungsanleitung

Epic

Epic EPTL79610.0 Bedienungsanleitung

Epic

Epic 450 MX Bedienungsanleitung

Epic

Epic Epic VIEW 550 ECTL09706.1 Bedienungsanleitung

Epic

Epic 425 Mx Treadmill Bedienungsanleitung

Epic

Epic 400 Mx Treadmill Bedienungsanleitung

Epic

Epic EPTL09605.0 Bedienungsanleitung

Epic

Epic Genesis 700 EETL77905.0 Bedienungsanleitung

Epic

Epic EPTL14106.0 Bedienungsanleitung

Epic

Epic 1000MX Bedienungsanleitung

Epic

Epic 425 MX EPTL88105.0 Bedienungsanleitung

Epic

Epic T20 FMTL24940 Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung