Epson Progression Abmessungen

EPSON AMERICA, INC.

EPSON

Product Support Bulletin

SUBJECT:

MS Windows 3.x Stylus 400/800+/Color Printer Driver problems

using the Progression/Progression4/NX-Epson/Endeavor-WG

Date: 11/5/94 PSB No: PSB S-0181

Page(s): 1 of 2 Originator: DS

This bulletin provides additional information to allow printer driver ver 1.03E for the Stylus 400,

800+ and Color printers to complete the installation process when connected to Epson

Progression/Progression4/NX-Epson and Endeavor-WG computers in the MS Windows 3.x

environment.

When attempting to install the 1.03E printer driver the following warning message appears:

“This driver cannot he updated because it is currently being used by windows.

Wait until Windows is finished using the driver, and then try again.”

This is caused by a conflict with the Wingine 256 color video driver and the printer installation

process. The following steps will help complete the installation:

Exit Windows to the DOS prompt, C:\>.

Change directories to Windows (Type CD\Windows ) Hit ENTER

At the C:\Windows prompt type SETUP and Hit ENTER.

After the SETUP screen appears, with the UP and DOWN arrows select the

DISPLAY line. Hit ENTER.

A BOX will appear near the bottom of the screen containing video drivers. With

the DOWN ARROW key, move through the drivers and find either a

WINGINE 32k or 64k color driver or select the Windows VGA driver.

Hit ENTER. Hit ENTER two more times to exit SETUP.

Type WIN to load Windows. In the MAIN program group find

CONTROL PANEL and double click. In CONTROL PANEL find PRINTERS

and double click. Continue with the printer installation from here.

After completing the installation, follow steps 1 through 4 to change back to

the Wingine 256 color driver you wish to use.

*NOTE: The latest version, v1.04, of the Stylus Printer Driver, file name STY104,EXE,

is available on the Epson RBBS, resolves the above issue.

EPSON AMERICA, INC. EPSON

Product Support Bulletin

Subject: Progression/Progression 4 OS/2 2.0 Display Driver

Date: 10/08/93 PSB No: S-0166

Page(s): 1 of 2 Originator: MWT

This bulletin announces the availability of Wingine-enhanced 32-bit display drivers

for the Epson Progression and Progression 4 computers running IBM's OS/2 2.0.

The 32-bit Service Pack from IBM must be installed before installing the new display

drivers. Also, the current system configuration must be VGA or SVGA.

These drivers can be downloaded from the Epson Bulletin Board System (BBS) that

can be reached at (310) 782-4531. They are located in one self-extracting file

(WING_OS2.EXE) in file library DRIVERS. Once downloaded, extract the files to a

high-density diskette (1.44MB) by entering the command:

WING_OS2 A: or WING_OS2 B:

depending on which disk drive is being used. The diskette must have the volume

label OS2 DRVS.

To install a driver, place the Display Drivers diskette into drive A:. Open an OS/2

session, either full-screen or window, and enter the following command:

A:INSTALL A: C:

INSTALL.CMD on the driver diskette copies files to the hard drive and starts the

OS/2 Display Driver Install utility DSPINSTL, which prompts the user.

When the Display Driver Install main panel appears, the Primary Display should

indicate Video Graphics Array. If so, click OK and proceed. If VGA is not selected,

select Primary Display and click OK.

Highlight the Driver/Resolution desired and click OK.

When the Source Directory panel appears, choose the floppy drive ( A: ) which

contains the Driver diskette and click on Install.

When the main panel appears again, click on Cancel.

The new driver has been installed. You must shutdown and then re-boot your

system for the changes to take effect.

For any future driver changes, INSTALL.CMD on the driver diskette is not required.

PSB No: S-0166

Page: 2 of 2

To change to a new driver, or return to VGA driver, simply type DSPINSTL on the

command line in an OS/2 full-screen or window session.

If you are selecting a different Wingine resolution, make sure that the Wingine

Display Driver diskette is in the floppy drive.

These drivers are not supported on the Epson NX or Progression NX, due to the use

of a different RAMDAC in those systems. Finally, only the beta version of OS/2 2.1

was tested. According to IBM the 32-bit graphics engine is the same as in the

Service Pack, so these drivers should work correctly.

EPSON AMERICA, INC. EPSON

Product Support Bulletin

Subject: Progression/Progression 4 Display Driver Upgrade Version 1.20

Date: 10/08/93 PSB No: S-0163

Page(s): 1 of 2 Originator: MWT

This bulletin announces the availability of Wingine-enhanced display drivers for the

Epson Progression and Progression 4 computers. These drivers replace the VGA

Utilities 1 and 2diskettes that originally shipped with these computers.

The changes from the previous release are:

-Removed support for Windows 3.0

-Added Wingine support for AutoCAD Release 12

-Added support for the TI RAMDAC (used in the NX models) for Windows 3.1

-Added support for 1024 x 768 x 32K colors and 1280 x 1024 x 256 colors,

interlaced

These drivers can be downloaded from the Epson Bulletin Board System (BBS) that

can be reached at (310) 782-4531. They are located in two self-extracting files

(WINGINE1.EXE and WINGINE2.EXE) in file library DRIVERS. These contain VGA

Utilities 1 and 2, respectively. Once downloaded, extract the files to a high-density

diskette (1.44MB) by entering the command:

WINGINE1 -d A: or WINGINE1 -d B:

and

WINGINE2 -d A: or WINGINE2 -d B:

depending on which disk drive is being used. Then, follow the instructions in the

VGA Utilities Guide to correctly upgrade any existing drivers or install new ones. For

AutoCAD Release 12, please refer to PSB S-0156, Progression/Progression 4

AutoCAD Release 12 Display Driver Upgrade.

DESCRIPTION

WINGINE1.EXE contains the Chips and Technologies SETUP utility, RAMDAC.COM

(which determines whether the Brooktree or TI RAMDAC is installed) and a batch file

(SETUP.BAT) that calls RAMDAC, copies the correct OEMSETUP.INF file for the

installed RAMDAC and then calls the C&T SETUP program. It also contains all of

the Windows drivers. This diskette should not be write-protected, and is all that is

needed to install (or upgrade) Windows drivers.

PSB No: S-0163

Page: 2 of 2

A directory of this diskette should look like:

WINDOWS <DIR> 06-10-93 3:33p

CSETUP EXE 35801 03-15-92 8:08a

SETUP SCP 14398 06-15-93 10:52a

SETUP BAT 211 06-15-93 11:03a

RAMDAC COM 143 06-10-93 4:35p

WINGINE2.EXE contains all of the non-Windows Wingine drivers. The directory for

this diskette should look like:

ACAD <DIR> 06-08-93 9:04a

CADKEY <DIR> 06-08-93 9:05a

CADVANCE <DIR> 06-08-93 9:05a

FW3 <DIR> 06-08-93 9:05a

GEM3 <DIR> 06-08-93 9:05a

LEVEL3 <DIR> 06-08-93 9:06a

LOTUS <DIR> 06-08-93 9:06a

VCAD <DIR> 06-08-93 9:06a

VESA <DIR> 06-08-93 9:06a

WORD5 <DIR> 06-08-93 9:07a

WORD55 <DIR> 06-08-93 9:07a

WP50 <DIR> 06-08-93 9:07a

WP51 <DIR> 06-08-93 9:07a

UTIL <DIR> 06-08-93 9:07a

ACAD12 <DIR> 06-08-93 9:07a

EPSON AMERICA, NC.

EPSON

Product Support Bulletin

Subject:

Epson Progression 4 - Questions and Answers

Date: 06/04/93

PSB No: S-0160

Page(s): 1 of 7

Originator: DS

Q1.

What is the Epson Progression 4?

The Epson Progression 4 is a small footprint, ISA compatible, desktop

computer that incorporates the CHIPS & Technologies ‘Wingine Graphics”

acceleration architecture. This technology greatly enhances performance

in the Microsoft Windows graphical environment running Windows

applications. Additionally, this system uses a proprietary memory access

technology called VirtualCache, which allows the computer to use all of

the system memory like a cache buffer. This dramatically increases overall

system and video performance.

Q2.

What is Wingine, and how does it differ from other ‘local bus” video

implementations already on the market?

Wingine is derived from the term “windows engine”, and is a graphics

acceleration technology developed by CHIPS & Technologies specifically

to speed up graphics processing and improve video performance in the

Windows environment.

Epson is the first company to use this new

technology which can improve performance up to 10 times over standard

VGA.

Traditional ISA systems require the CPU to access the VGA controller

over the ISA bus.

Data is sent by the VGA controller to video memory,

back to the VGA controller, and then to the display. Because the ISA bus

has only a 16-bit wide data path and operates at 8MHz, the performance

is slow.

‘Local bus” solutions eliminate the ISA bus bottleneck but retain other

bottlenecks. For example, data traveling from the CPU over an extension

to the system’s local bus, the data moves at system speed to the VGA

controller. Data is then sent to the DRAM video memory and then back to

the VGA controller before moving to the display. The data moves much

faster than in the ISA bus architecture, but this method still results in

bottlenecks as data moves through the intervening components, such as

the VGA controller.

PSB No: S-0160

Page: 2 of 7

In the Wingine implementation, video data is sent from the CPU via the

existing memory bus directly into VRAM and the CPU accesses VRAM

like system memory, at CPU speed. Video data then travels to the

Wingine graphics accelerator and on to the display. This simplified method

processes the data in fewer steps, resulting in greater video performance

and avoiding the bottlenecks and timing problems associated with ISA bus

and local bus technologies. Moreover, video performance is further

enhanced because VRAM is capable of sending and receiving data at the

same time. And when the CPU is upgraded with either an OverDrive

processor or a faster CPU card, Wingine performance also increases,

since the CPU sends video data directly into the VRAM, without any

intervening component bottlenecks

Q3.

Does Wingine support MS-DOS applications?

Yes. To support MS-DOS applications, Epson has included a variety of

VGA device drivers and special utilities on the VGA diskettes included

with the Progression 4. Super VGA support is available for these popular

applications:

Autodesk Autocad and AutoCad/386, versions 10 and 11

CADKEY, version 3.51

CADVANCE, version 3.50

Framework Ill and IV

GEM, version 3.0

Generic CADD, Level 3, version 1.1

Lotus 1-2-3, version 2.0 and Lotus Symphony, versions 1.0 and 1.1

Microsoft Word, versions 5.0 and 5.5

Ventura Publisher, version 2.0

VersaCad Design and VersaCAD 386, version 5.4

VESA Driver, version 1.0

WordPerfect, versions 5.0 and 5.1

WordStar, versions 4.0 and 5.0

PSB No: S-0160

Page: 3 of 7

Q4.

Q5.

Q6.

Q7.

Does Epson update these drivers? How does the user obtain an

updated version?

Yes. Epson is constantly working with application vendors and the VGA

manufacturer to provide customers with the most current device drivers

available.

Resellers have access to these device drivers through the

Epson Product Support BBS (310-782-4531). This electronic bulletin

board provides new information about Epson products 24 hours a day, 7

days a week.

Do the VGA drivers take advantage of the Wingine video graphics

acceleration architecture?

No. When using MS-DOS applications, the Epson Progression 4 operates

in standard VGA mode. The true advantage of the Wingine architecture is

realized within the Windows 3.0 and 3.1 environments. Drivers are

provided for both versions of Windows. In the future, Epson will make

Wingine drivers available for MS-DOS applications such as AutoCAD and

for operating systems like OS/2.

Does the Epson Progression 4 include hardware cursor support and

what are its benefits?

Yes. The SETUP program in Windows 3.1 lists several drivers marked

*Wingine Hardware Cursor. These options add hardware-based cursor

control which frees the CPU from handling mouse movements and

redraws. This speeds up overall system performance. In addition, the

cursor will not blink when it’s moved over areas on the screen that are not

being changed.

What is VirtualCache and why is it beneficial?

Epson’s VirtualCache memory architecture produces cache-like

performance without the cache subsystem. Here’s a summary of how it

works: the Progression 4 uses its standard, dynamic RAM to communicate

directly with the CPU. Using VirtualCache architecture, the system works

at the burst speed of the 486 processor (the fastest speed possible),

delivering the fastest performance possible without the need for a

secondary cache buffer. This makes the “Virtual” buffer as large as the

total system memory which is a minimum of 4MB.

In addition, the VirtualCache feature acts with the Wingine accelerator to

boost video performance by allowing large quantities of data to move from

memory to the screen at processor speed rather than at system I/O

speed.

PSB No: S-0160

Page: 4 of 7

Q8.

What configurations are available?

The Epson Progression

is available with a choice of one of three

different processors:

486SX/33 (ODP processor upgrade available for this model only)

486DX2/50

486DX2/66

Each model processor comes with either of the following:

3.5” 1.44 FDD

3.5” 1.44 FDD and 120MB HDD

3.5” 1.44 FDD and 240MB HDD with MS-DOS 5.0 and Windows 3.1

pre-installed

Q9.

What are the differences between the 486SX/33, 486DX2/50, and the

486DX2/66?

The 486SX/33 microprocessor is a 32-bit processor which runs at 33MHz

internally and externally, and incorporates an 8KB internal cache. The

internal math-coprocessor is disabled.

The 486DX2/50 microprocessor is also a 32-bit processor which

runs at 50MHz internally and 25MHz externally, and incorporates 8KB of

internal cache. The internal math-coprocessor is active.

The 486DX2/66 microprocessor is also a 32-bit processor which

runs at 66MHz internally and 33MHz externally, and incorporates 8KB of

internal cache. The internal math-coprocessor is active.

Andere Handbücher für Progression

Dieses Handbuch passt für folgende Modelle

Andere Epson Desktop Handbücher

Epson

Epson Equity III Abmessungen

Epson

Epson ActionPC 2600 Installations- und Betriebshandbuch

Epson

Epson EL 3S/33 Installations- und Betriebshandbuch

Epson

Epson Equity LT-286e Abmessungen

Epson

Epson Endeavor Bedienungsanleitung

Epson

Epson Powerspan 2 Bedienungsanleitung

Epson

Epson Powerspan Installations- und Betriebshandbuch

Epson

Epson Equity 386/33 PLUS Installations- und Betriebshandbuch

Epson

Epson ActionPC 6000 Bedienungsanleitung

Epson

Epson Equity Ie Q50188015-1 Bedienungsanleitung

Epson

Epson Endeavor WG Bedienungsanleitung

Epson

Epson Progression Bedienungsanleitung

Epson

Epson EL 3S/33 Bedienungsanleitung

Epson

Epson PX-8 Bedienungsanleitung

Epson

Epson Equity IIe Installations- und Betriebshandbuch

Epson

Epson ActionPC 1500 Installations- und Betriebshandbuch

Epson

Epson ExpressStation Installations- und Betriebshandbuch

Epson

Epson NX Installations- und Betriebshandbuch

Epson

Epson EL 486UC+ Installations- und Betriebshandbuch

Epson

Epson Equity 320SX PLUS Installations- und Betriebshandbuch

Epson

Epson Equity Ie Abmessungen

Epson

Epson Apex 110 Bedienungsanleitung

Epson

Epson Equity III Abmessungen

Epson

Epson Equity 386/33 PLUS Bedienungsanleitung

Beliebte Desktop Handbücher anderer Marken

HP m9060n - Pavilion - Elite Technisches Datenblatt

Asus

Asus E210 Series Bedienungsanleitung

Dell

Dell Inspiron 600m Bedienungsanleitung

Dell

Dell Inspiron 3662 Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

HP Presario SV7000 - Desktop PC Bedienungsanleitung

HP ProDesk 400 G5 Handbuch

Logitech

Logitech MK320 Bedienungsanleitung

Dell

Dell XPS 730 H2C Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

Dell

Dell Optiplex 9010 All In One Bedienungsanleitung

HP Z1 Bedienungsanleitung

Everex

Everex eXplora Bedienungsanleitung