Epson EPL-2180 Bedienungsanleitung

Setup Guide

For detailed information and safety recommendations, refer to the User's Guide (installed with the software).

For users in Hong Kong

Read this Setup Guide before assembling,

installing or using this printer.

After reading this Setup Guide,

keep it in a convenient place near the printer.

Hotline information: (852) 2827-8911

Safety Instructions

Laser Printer Precautions

This printer uses laser technology. Follow the precautions below to ensure safe, efficient

operation.

❏Unless specifically instructed in the printer’s

documentation, be careful not to touch the

fuser, which is marked CAUTION hot surface. If

the printer has been in use, the fuser may be

very hot.

❏Do not attempt to modify or take the imaging

cartridge apart. It cannot be refilled.

❏Do not touch the toner and avoid all toner

contact with your eyes.

❏If toner is spilled, use a broom and dustpan or a

damp cloth with soap and water to clean it up.

Because the fine particles can cause a fire or

explosion if they come into contact with a

spark, do not use a vacuum cleaner.

❏Do not dispose of used imaging cartridges in

fire, as they can explode and cause injury.

Dispose of them according to local regulations.

Important Safety Instructions

Read all of the following instructions before operating your printer:

When choosing a place and power source for the printer

❏Place the printer near an electrical outlet where you can easily plug in and

unplug the power cord.

❏Do not place the printer on an unstable surface.

❏Do not put your printer where the cord will be stepped on.

❏Slots and openings in the cabinet and the back or bottom are provided for

ventilation. Do not block or cover them. Do not put the printer on a bed, sofa,

rug, or other similar surface or in a built-in installation unless proper ventilation is

provided.

❏Avoid using outlets that other appliances are plugged into.

❏Use the type of power source indicated on the label. If you are not sure of the

type of power available, consult your dealer or local power company.

CAUTION

hot surface

❏If you are unable to insert the plug into the outlet, contact a qualified electrician.

❏When connecting this product to a computer or other device with a cable,

ensure the correct orientation of the connectors. Each connector has only one

correct orientation. Inserting a connector in the wrong orientation may damage

both devices connected by the cable.

❏If you use an extension cord, make sure that the total of the ampere ratings on

the products plugged into the extension cord does not exceed the extension

cord ampere rating.

❏Unplug this printer from the wall outlet and refer servicing to a qualified service

representative under the following conditions:

When using the printer

❏The printer weighs about 14.5kg (32 lb). One person should not attempt to lift or

carry the printer. Two people should carry it.

❏Follow all warnings and instructions marked on the printer.

❏Unplug this printer from the wall outlet before cleaning.

❏Use a well-wrung cloth for cleaning and do not use liquid or aerosol cleaners.

❏Avoid touching the components inside the printer unless instructed to do so in

the printer’s documentation.

❏Never force printer components into place. Although the printer is designed to

be sturdy, rough handling can damage it.

❏Be sure to keep consumables out of the reach of children.

❏Do not use printer in a damp environment.

❏Do not leave jammed paper inside of the printer. This can cause the printer to

overheat.

❏Never push objects of any kind through cabinet slots as they may touch

dangerous voltage points or short out parts that could result in a risk of fire or

electric shock.

❏Never spill liquid of any kind on the printer.

A. When the power cord or plug is damaged or frayed.

B. If liquid has been spilled into it.

C. If it has been exposed to rain or water.

D. If it does not operate normally when the operating instructions are followed.

Adjust only those controls that are covered by the operating instructions

since improper adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to restore the product

to normal operation.

E. If it has been dropped or the cabinet has been damaged.

F. If it exhibits a distinct change in performance, indicating a need for service.

❏Except as specifically explained in the printer’s documentation, do not attempt

to service this product yourself. Opening or removing those covers that are

marked Do Not Remove may expose you to dangerous voltage points or other

risks. Refer all servicing in those compartments to a qualified service

representative.

❏Adjust only those controls that are covered by the operating instructions.

Improper adjustment of other controls may result in damage and may require

repair by a qualified service representative.

Safety Information

Power cord

cCaution:

Be sure the AC power cord meets the relevant local safety standards.

Use only the power cord that comes with this product. Use of the another cord may

result in fire or electric shock.

This product’s power cord is for use with this product only. Use with other equipment

may result in fire or electric shock.

Laser safety labels

wWarning:

The performance of procedures and adjustments other than those specified in

the printer’s documentation may result in hazardous radiation exposure.

Your printer is a Class 1 laser product as defined in the

IEC60825 specifications. The label shown is attached to

the back of the printer in countries where required.

Internal laser radiation

This is a Class III b Laser Diode Assembly that has an invisible laser beam. The printer head

unit is NOT A SERVICE ITEM, therefore, the printer head unit should not be opened under

any circumstances. An additional laser warning label is affixed to the inside of the

printer.

Max. Average Radiation Power: 0.157 mW at laser aperture

Wavelength: 770 to 795 nm

Ozone safety

Ozone emission

Ozone gas is generated by laser printers as a by-product of the printing process. Ozone

is produced only when the printer is printing.

Ozone exposure limit

The recommended exposure limit for ozone is 0.1 parts per million (ppm) expressed as

an average time-weighted concentration over an eight (8) hour period.

The Epson laser printer generates less than 0.02 ppm for eight (8) hours of continuous

printing.

Minimize the risk

To minimize the risk of exposure to ozone, you should avoid the following conditions:

❏Use of multiple laser printers in a confined area

❏Operation in conditions of extremely low humidity

❏Poor room ventilation

❏Long, continuous printing together with any of the above

Printer location

The printer should be located so that the exhaust gases and heat generated are:

❏Not blown directly into the user’s face

❏Vented directly out of the building whenever possible

/Unpacking the Printer /Choosing a Place for the Printer

EPSON genuine imaging cartridge

CD-ROM

110 mm

(4.3 in.)

250 mm (9.8 in.)

291 mm

(11.5 in.)

100 mm

(3.9 in.)

660 mm

(26.0 in.)

/Installing the Imaging Cartridge

54 Gently shake the imaging cartridge a few times. Pull the seal straight out to remove it.

Install the imaging cartridge as shown in these illustrations.

/Connecting the Printer to your Computer

USB

IEEE1284

Note: Make sure the printer is turned off.

/Loading Paper

12 13

17 18

1514

/Installing the Printer Software

20 Windows

123

Inhaltsverzeichnis

Andere Epson Drucker Handbücher

Epson

Epson ET-2600 Bedienungsanleitung

Epson

Epson Stylus Pro 7700 Series Bedienungsanleitung

Epson

Epson TM-H5000II series Bedienungsanleitung

Epson

Epson Stylus C44UX series Handbuch

Epson

Epson R320 - Stylus Photo Color Inkjet Printer Bedienungsanleitung

Epson

Epson LX-300+ Bedienungsanleitung

Epson

Epson Stylus 1500 Bedienungsanleitung

Epson

Epson Stylus Color 800 Bedienungsanleitung

Epson

Epson Stylus Pro 7880 ColorBurst Edition - Stylus Pro 7880... Bedienungsanleitung

Epson

Epson ET-5800 Series Bedienungsanleitung

Epson

Epson R800 - Stylus Photo Color Inkjet Printer Bedienungsanleitung

Epson

Epson WF-M5799 Bedienungsanleitung

Epson

Epson 4000 - Stylus Pro Color Inkjet Printer Bedienungsanleitung

Epson

Epson SureColor SC-F7000 Bedienungsanleitung

Epson

Epson SureColor S30670 Bedienungsanleitung

Epson

Epson Stylus Photo 825 Bedienungsanleitung

Epson

Epson Expression Home XP-405 Montageanleitung

Epson

Epson WorkForce AL-M400DN Bedienungsanleitung

Epson

Epson Expression Premium XP-6005 Bedienungsanleitung

Epson

Epson LQ-2550 Abmessungen

Epson

Epson Stylus C64 Bedienungsanleitung

Epson

Epson L200 Bedienungs- und Wartungshandbuch

Epson

Epson TM-T88V-DT Bedienungsanleitung

Epson

Epson AL-C3000 Series Originalbetriebsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung

IRA3D

IRA3D POETRY4 Bedienungsanleitung

Ricoh

Ricoh Aficio AP400 Bedienungsanleitung

BIXOLON

BIXOLON SRP-352plusV Bedienungsanleitung