Epson LFP C Benutzerhandbuch

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere Epson Drucker Handbücher

Epson

Epson FX-1050+ Bedienungsanleitung

Epson

Epson XP-8700 Series Bedienungsanleitung

Epson

Epson SC-B7000 Series Bedienungsanleitung

Epson

Epson Stylus C84WN Bedienungsanleitung

Epson

Epson Stylus C82N Bedienungsanleitung

Epson

Epson AcuLaser Color 2000 Bedienungsanleitung

Epson

Epson AcuLaser C1900 Handbuch

Epson

Epson XP-6000 Bedienungsanleitung

Epson

Epson LQ-1050X Bedienungsanleitung

Epson

Epson 1400 - Stylus Photo Color Inkjet Printer Bedienungsanleitung

Epson

Epson L3250 Bedienungsanleitung

Epson

Epson Stylus CX4100 Series Bedienungsanleitung

Epson

Epson Stylus Photo 830 Series Handbuch

Epson

Epson TM-S2000 Series Gebrauchs- und Pflegehandbuch

Epson

Epson Stylus COLOR 3000 Bedienungsanleitung

Epson

Epson Stylus Color Series Bedienungsanleitung

Epson

Epson SC-F2000 Series Bedienungsanleitung

Epson

Epson Stylus pro 7700m Bedienungsanleitung

Epson

Epson TM-C3400BK Bedienungsanleitung

Epson

Epson ActionLaser 1100 Bedienungsanleitung

Epson

Epson C31C391A8791 - TM U230P Two-color Dot-matrix... Bedienungsanleitung

Epson

Epson DLQ-3500 Bedienungsanleitung

Epson

Epson Mobilink TM-P80II Bedienungsanleitung

Epson

Epson FX-286 - Impact Printer Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung

IRA3D

IRA3D POETRY4 Bedienungsanleitung

Ricoh

Ricoh Aficio AP400 Bedienungsanleitung

BIXOLON

BIXOLON SRP-352plusV Bedienungsanleitung

EPSON LFP C & I

Startup Guide After Prolonged Shutdown

2

Epson LFP C & I

Startup Guide After Prolonged Shutdown

The contents of this guide are intended to help you get

your Epson large format printer back operational again

after a prolonged period of inactivity.

If after following the steps laid out in this guide you are

experiencing technical issues with your device, please

call our Customer Interaction Center on, 0871 423

7766* or alternatively navigate to

https://www.epson.co.uk/contactus

for more contact options.

*Calls cost 10p per minute plus network extras.

3

Epson SureColor

SC-F Series Dye Sub

4

Epson SureColor

SC-F Series Dye Sub

•Clear any dust from the printer surface, filters and print area.

•Turn on the printer if not already switched on.

•Remove any media installed in the printer.

•Check maintenance tank/waste ink bottle capacity and ink levels, replace as required.

•Go to Epson.co.uk/support to find your model and update the firmware to the latest available.

Once the firmware update process has completed, either wait for your printer to restart, or switch

back on using the power button depending on which model you have. If your printer supports

Epson Edge Dashboard you can perform the firmware update from there.

•If your model has HDK ink installed, use the stirring stick to agitate the HDK ink.

•For printer model numbers SC-F6300 and above, follow the user guide on how to perform

head/cap maintenance before proceeding to the next step.

•Perform a heavy clean from the printers control panel.

•Install the media.

•Run a nozzle check and observe the results.

•If only a few nozzles are missing run a light clean to recover, for more extensive nozzle loss

perform the heavy clean again up to a maximum of three times, running a nozzle check in

between.

5

Epson SureColor

SC-F Series DTG

6

Epson SureColor

SC-F Series DTG Recover From Storage Mode

•Clear any dust from the printer surface, filters and print area.

•Empty the waste ink bottle.

•Prepare the ink cartridges and shake the colour inks approximately 15 times over 5 secs, and the

white inks for 50 times each side over 15 secs.

•Open the cover and check the flushing box condition. Clean/replace as required.

•Switch on the printer and follow the prompts to replace the cleaning solution with the prepared

ink cartridges. Follow the instructions until the printer returns to a ready state.

•Go to Epson.co.uk/support to find your model and update the firmware to the latest available.

Restart the printer once the firmware update has completed.

•Carry out the head/cap maintenance as laid out in the user guide.

•Perform a cleaning cycle from the printers control panel.

•Run a nozzle check and observe the results.

•If only a few nozzles are missing run a light clean to recover, for more extensive nozzle loss

perform the heavy clean up to a maximum of three times, running a nozzle check in between.

7

Epson SureColor

SC-F Series DTG Recover

•Clear any dust from the printer surface and print area.

•Open the cover and check the flushing box condition. Clean/replace as required.

•Turn on the printer if not already switched on.

•Check maintenance tank capacity and ink levels, empty and change as required.

•Go to Epson.co.uk/support to find your model and update the firmware to the latest available.

Once the firmware update process has completed, either wait for your printer to restart, or

switch back on using the power button depending on which model you have.

•Remove the ink cartridges and shake the colour inks approximately 15 times over 5 secs, and the

white inks for 50 times each side over 15 secs.

•If the white inks were replaced with cleaning solution at shutdown, do not switch back to white

ink until there is a requirement to print dark garments.

•Carry out the head/cap maintenance as laid out in the user guide.

•Perform a heavy clean from the printers control panel.

•Run a nozzle check and observe the results.

•If only a few nozzles are missing run a light clean to recover, for more extensive nozzle loss

perform the heavy clean up to a maximum of three times, running a nozzle check in between.

Cleaning carts (capacity required) can be used to perform a head wash on the effected channel

for extreme cases.