Epson Stylus Pro GS6000 Bedienungsanleitung

Epson Stylus®Pro GS6000

Pre-installation Checklist

The estimated setup time for the Epson Stylus Pro GS6000 is 2 to 3 hours. Make sure you have six or more people available

to help lift and guide the printer onto its stand. Follow these guidelines:

Space Requirements

The printer, stand, and take-up roller come on a pallet that weighs 781 lb (354 kg), with its dimensions shown below.

Make sure you can move the equipment from your receiving area to the printer’s final location. For example, make sure

it will fit inside an elevator, through doorways, and around corners. Keep the printer horizontal as much as possible.

The amount of space required to use the printer is shown below, but you’ll need a larger space to assemble it. Clear a large

floor space before unpacking. Be sure to leave enough space behind the printer to load ink and media.

Environmental Requirements

The Epson Stylus Pro GS6000 can be installed in any location with a typical air conditioning or air ventilation system.

No special air purification system is required. Avoid placing the printer near a vent that would blow directly on it.

Additional information about ink cartridge safety is provided in the Material Safety Data Sheets online at

www.proimaging.epson.com.

52 ½ in.

(133 cm)

115 ½ in.

(293 cm)

43 in.

(109 cm)

61 in.

(155 cm)

150 in.

(380 cm) 108 in.

(275 cm)

Choose a location for the printer that meets these requirements:

Electrical Requirements

You will need three electrical outlets to plug in the printer,

heater, and take-up roller (do not use a power strip). It is

recommended that the outlets be powered by a dedicated

30-amp circuit. Typical power consumption while printing

is about 680 watts. Make sure your electrical system meets

the requirements shown to the right.

Computer Requirements

Make sure your computers meet these requirements for using the ColorBurst®RIP:

We recommend that you use a Cat 6 Ethernet cable and connect the printer through your network, instead of using USB.

Tools and Supplies

You’ll need the following tools and supplies:

•No. 2 (medium) Phillips screwdriver

Required to assemble the stand.

•Lifting bars (optional)

Two 5-foot lengths of 1-inch steel pipe (available at hardware stores) will make it easier to lift the printer onto its stand.

Caution: The printer without its stand weighs 330 lb (150 kg). Six or more people are required to lift and guide it onto the stand.

•Metric ruler

You’ll need a steel ruler with divisions in millimeters (at least 500 mm long, or one-half meter) to perform the line feed

adjustment. For more information, see Chapter 2 in the Setup and Use Guide.

•Printable media

You’ll need a supply of media to perform certain adjustments. We recommend using adhesive-backed vinyl, available

from companies such as 3M, Avery, or Epson.

You may also need a box cutter to unpack the printer and to cut media, a loupe to read alignment patterns, and a

spectrophotometer to linearize your color output.

Operation Storage

Temperature 68 to 90 °F (20 to 32 °C) 14 to 104 °F (–10 to 40 °C)

(4 days at 90 °F [32 °C])

Humidity

(without condensation)

40 to 60% RH 20 to 80% RH

(stored in shipping container)

Server Workstation:

•Windows Vista®(recommended) or

Windows®XP (32-bit)*

•2.8 GHz Intel®Core™2 Duo or better

•4GB memory recommended

Client Workstation(s):

•Mac OS®X 10.4.11 or higher

•Windows Vista or Windows XP (32- or 64-bit)*

* Windows XP “Classic Mode” may not be used.

Specification Description

Voltage 110 to 120 V

Frequency 50 to 60 Hz

Current 23.5 A

Epson and Epson Stylus are registered trademarks, and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation.

Other product names are the property of their respective owners.

Andere Handbücher für Stylus Pro GS6000

Inhaltsverzeichnis

Andere Epson Drucker Handbücher

Epson

Epson 2000P - Stylus Photo Color Inkjet Printer Bedienungsanleitung

Epson

Epson SureColor SC-S70600 Handbuch

Epson

Epson pro 4000 Merkblatt

Epson

Epson LQ-2080 Montageanleitung

Epson

Epson J9100 - TM Two-color Inkjet Printer Bedienungsanleitung

Epson

Epson SureColor T3170x Bedienungsanleitung

Epson

Epson PictureMate Express Edition - Compact Photo... Bedienungsanleitung

Epson

Epson StylusRIP Professional (Stylus Photo 2200 Abmessungen

Epson

Epson 1400 - Stylus Photo Color Inkjet Printer Bedienungsanleitung

Epson

Epson Stylus C63 Bedienungsanleitung

Epson

Epson Stylus Photo 700 Bedienungsanleitung

Epson

Epson SC-T3100M Series Bedienungsanleitung

Epson

Epson 3800 - Stylus Pro Color Inkjet Printer Bedienungsanleitung

Epson

Epson Stylus Pro 10000 Series Bedienungsanleitung

Epson

Epson Stylus Office TX600FW Series Leitfaden

Epson

Epson 4003353 Bedienungsanleitung

Epson

Epson 1400 - Stylus Photo Color Inkjet Printer Bedienungsanleitung

Epson

Epson Stylus SX130 series Bedienungsanleitung

Epson

Epson Stylus Pro 7900 Bedienungsanleitung

Epson

Epson T88III - TM B/W Thermal Line Printer Bedienungsanleitung

Epson

Epson PHOTO R350 Series Bedienungsanleitung

Epson

Epson LG1-1070 Bedienungsanleitung

Epson

Epson FX-1180 - Impact Printer Bedienungsanleitung

Epson

Epson Stylus Photo PX730WD Montageanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung

IRA3D

IRA3D POETRY4 Bedienungsanleitung

Ricoh

Ricoh Aficio AP400 Bedienungsanleitung

BIXOLON

BIXOLON SRP-352plusV Bedienungsanleitung