Epson ELPLX02 Bedienungsanleitung
3
EnglishFrançaisDeutschItalianoEspañol
中文
(
简体
)
中文
(
繁体
)
日本語
Included Items List
Check the following list to confirm that you have all of the supplied items. If by any
chance there is anything missing or damaged, please contact your dealer.
Shock absorber unit
(You may not need to install this
depending on the projector you are
using)
Lens unit (With lens covers (large and
small))
Decorative cover (the shape of the
cover to be attached depends on
the projector you are using)
Attaching the Cover
/ Projection Distance
Table (separate sheet)
User's Guide (this
guide)
*You need a commercially available No. 2 cross-head screwdriver to install the lens unit
and the decorative cover.
Safety Instructions
Read this document and the User's Guide supplied with the projector carefully to use
this unit safely and correctly. To allow you to solve any unknown points quickly, keep this
information close to hand.
So that you can use the product safely and correctly, symbols are applied in this Guide
and on the product to indicate possible harm to the user or to others and the risk of
damage to property. The indications and their meaning are as follows. Make sure you
understand them properly before reading the guide.
4
EnglishFrançaisDeutschItalianoEspañol
中文
(
简体
)
中文
(
繁体
)
日本語
Warning
This symbol indicates information that, if ignored, could pos-
sibly result in death or personal injury due to incorrect han-
dling.
Caution
This symbol indicates information that, if ignored, could possi-
bly result in personal injury or physical damage due to incor-
rect handling.
Warning
•Disconnect the power cord from the projector before attaching or removing this
product.
Attaching or removing while the power cord is connected could cause an electric
shock.
•When attaching the product to the projector, make sure that it is securely installed
and that it is locked in place. If this product is not attached correctly it may fall,
resulting in personal injury or an accident.
•When removing dirt and dust from the product, do not use a spray that contains
flammable gas. The high heat generated inside the projector may cause a fire.
Caution
•When projecting, remove the lens cover from the front of the lens unit.
•Before attaching the lens unit, check the projector's model number. If this lens unit
is attached to a projector other than the specified projector, the lens unit or the
projector could be damaged.
•Be careful not to trap your finger when attaching this product to the projector. This
may cause an injury.
•Do not disassemble or remodel.
•Do not use or store the projector in places where it might be subjected to high and
low extremes of temperature. Also, avoid any sudden changes in temperature.
•Do not use or store the projector in places where smoke from oil or cigarettes may
be present, as it can adversely affect the quality of the projected images.
•Do not get it wet.
•Do not drop it or subject it to impacts. When putting this product down, make sure
you place it on a flat, stable surface.
•When moving the projector, do not hold the lens unit. The lens unit may come off
and the projector may fall causing an injury.
•Remove the lens unit when transporting the projector. If the projector is transport-
ed with the lens unit attached, the lens unit or the projector could be damaged.
5
EnglishFrançaisDeutschItalianoEspañol
中文
(
简体
)
中文
(
繁体
)
日本語
Caution
•Do not attach the lens unit when the projector's lens insertion section is facing up.
Dust or dirt could enter the projector.
•Try not to touch the lens section with your hand or fingers. If fingerprints or oils are
left on the surface of the lens, projection quality deteriorates.
•Do not touch or pull the connector part or the cable as this could cause a malfunc-
tion.
•When cleaning this product, do not use a wet cloth or solvents such as alcohol,
benzene, or thinner as this could cause an electric shock or a malfunction.
•Attach the cover to the lens unit, and place it on its side on a stable surface. Failure
to do so may cause the lens unit to fall causing a malfunction or damage.
6
EnglishFrançaisDeutschItalianoEspañol
中文
(
简体
)
中文
(
繁体
)
日本語
Removing and Attaching the Lens Unit
Depending on the projector being used, procedures and illustrations may differ from the
explanations. Make sure you read the User's Guide supplied with the projector.
Attaching
A
Remove the lens replacement cover.
Keep the lens replacement cover in a safe place.
*The shape of the lens replacement cover and
how to remove it differs depending on the
projector you are using. See the
User's Guide
supplied with the projector.
B
Hold the lock lever and turn it
counterclockwise.
C
Remove the lens cover (small) from the
lens unit.
Use the cover when storing or transporting the
lens unit on its own. Keep the lens cover in a
safe place.
7
EnglishFrançaisDeutschItalianoEspañol
中文
(
简体
)
中文
(
繁体
)
日本語
D
Make sure the lens unit is not at an angle,
and insert it straight into the lens insertion
section.
E
While holding the lens unit firmly, hold the
lock lever and turn it clockwise to lock the
lens unit.
Check that the lens cannot be detached.
If it cannot be locked, the lens unit is at an
angle. Remove and then reinstall the lens unit.
F
Tighten the M3 screws (4 points) with a
commercially available No. 2 cross-head
screwdriver.
8
EnglishFrançaisDeutschItalianoEspañol
中文
(
简体
)
中文
(
繁体
)
日本語
G
Attach the shock absorber unit (depending
on the model you are using) and the
decorative cover.
See the "Attaching the Cover/Projection Distance
Table" supplied.
H
Remove the lens cover (large).
Keep the lens cover in a safe place.
After Replacing the Lens Unit
After replacing the lens unit, calibrate the lens so that the projector can correctly
acquire the lens position and adjustment range. After attaching a lens unit, a message is
displayed when the projector is turned on. Select [Yes] to calibrate the lens.
Adjusting the Image
For more information on the following, see the User's Guide supplied with the projector.
•Focus adjustment
•Distortion adjustment
When you perform distortion adjustment, the size of the screen changes.
•Lens shift
•Keystone correction
*This product is a fixed focus lens. The zoom function is not supported.
9
EnglishFrançaisDeutschItalianoEspañol
中文
(
简体
)
中文
(
繁体
)
日本語
Removing
Caution
•If lens shift has been performed, move the lens position to the home position be-
fore replacing the lens unit.
•Turn off the projector and then wait for a while (approximately 30 minutes) before
removing the lens unit. If you touch the lens unit during projection or immediately
after turning off the projector, it could cause a burn.
A
Attach the lens cover (large).
B
Remove the decorative cover and the
shock absorber unit (depending on the
model you are using).
See the "Attaching the Cover/Projection Distance
Table" supplied.
10
EnglishFrançaisDeutschItalianoEspañol
中文
(
简体
)
中文
(
繁体
)
日本語
C
Loosen the M3 screws (4 points) with a
commercially available No. 2 cross-head
screwdriver.
D
While holding the lens unit firmly, hold the
lock lever and turn it counterclockwise to
unlock the lens unit.
Pull the lens unit straight out as it is released.
E
Attach the lens cover (small).
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Sprachen:
Andere Epson Projektorzubehör Handbücher
Epson
Epson ELPMB29 Bedienungsanleitung
Epson
Epson ELPMB27 Bedienungs- und Sicherheitshinweise
Epson
Epson ELPMBC01 Leitfaden
Epson
Epson ELPWP10 Bedienungsanleitung
Epson
Epson BrightLink Solo Interactive Module (IU-01 Bedienungsanleitung
Epson
Epson ELPAF58 Bedienungsanleitung
Epson
Epson ELPMBP01 Leitfaden
Epson
Epson ELPDC06 Document Camera For serial numbers beginning with LQZF - DC-06 Document... Bedienungsanleitung
Epson
Epson BrightLink 450Wi - Interactive Projector Leitfaden
Epson
Epson ELPHB800 Bedienungsanleitung
Epson
Epson WN8111BEP Bedienungsanleitung
Epson
Epson EpiqVision Ultra LS500 Bedienungsanleitung
Epson
Epson 26-484-01 Bedienungsanleitung
Epson
Epson ELPMBP02 - False Ceiling Plate Leitfaden
Epson
Epson POWERLITE 8300I EMP-8300 Bedienungsanleitung
Epson
Epson ELPMBPJF - Universal Projector Ceiling Mount Leitfaden
Epson
Epson ELPLL07 Bedienungsanleitung
Epson
Epson ELPMB45 Bedienungsanleitung
Epson
Epson 7900p - PowerLite XGA LCD Projector Bedienungsanleitung
Epson
Epson Mounting bracket Bedienungsanleitung
