Epson 2480 - Perfection Photo Installations- und Betriebshandbuch

Epson Perfection 2480 Photo

6/04 Epson Perfection 2480 Photo - 1

Scanner Parts Option

The Multi Photo Feeder (part number B12B813372) lets you

load up to 24 photos or business cards and scan them

automatically. See the on-screen Reference Guide for

instructions.

Scanner Specifications

Basic Specifications

Scanner type Flatbed, color

Photoelectric Color CCD line sensor

device

Effective pixels 20,400 × 28,080 pixels at 2400 dpi

Document size 8.5 × 1.7 inches (216 × 297 mm)

Letter size or A4 (reading area can

be specified from software)

Scanning 2400 dpi (main scan)

resolution 4800 dpi with Micro Step (sub scan)

Output 50 dpi to 12800 dpi

resolution (50 to 6400 dpi in 1 dpi increments, and

12800 dpi. 12800 dpi performed with

zoom function.)

Color separation RGB color filters on CCD

Image data 16 bits per pixel per color internal

1, 8, and 16 bits per pixel per color external

Line art settings Adjustable threshold

Gamma correction 1 type for user-defined

Interface USB 2.0 Hi-Speed (Type B connector)

Light source White cold cathode fluorescent lamp

Dimensions Width: 10.8 inches (275 mm)

Depth: 16.5 inches (419 mm)

Height: 3.4 inches (86 mm)

Weight Approx. 6.6 lb (3.0 kg)

Document

table

Carriage and

lamp (in the

home position)

USB port

inlet

Option

port

]Start button

Scanner cover

Transportation lock

(beneath scanner; see page 5)

{Copy button

|Scan to

E-mail button

4Scan and

Save button

Reflective

document mat

Cover

cable

Output tray

Edge guides

Cable

Epson Perfection 2480 Photo

2 - Epson Perfection 2480 Photo 6/04

Electrical

Input voltage AC 100 to 120 V

Ratedfrequency 50to60Hz

Rated current 1.0 A

Power 17.0 W operating (with TPU)

consumption 13.0 W standby mode

5.0 W sleep mode (with TPU)

Environmental

Temperature Operation: 41 to 95 °F (5 to 35 °C)

Storage: –13 to 140 °F (–25 to 60 °C)

Humidity Operation: 10 to 80%

(without Storage: 10 to 85%

condensation)

Operating Ordinary office or home conditions.

conditions Extreme dust should be avoided. Operation

under direct sunlight or near a strong light

source should be avoided.

Safety Approval

EMC FCC Part 15 Subpart B Class B

CSA C108.8 Class B

USB Interface

Interface type Universal Serial Bus Specification

Revision 2.0

Electrical standard Full Speed mode (12 Mbits/s) and

Hi-Speed mode (480 Mbits/s) of Universal

Serial Bus Specification Revision 2.0.

Connector type One receptacle (Type B)

Transparency Unit

Supplied voltage DC 24.0 to 26.4 V

Rated current 0.3 A

35 mm film types Strip: up to three 35 mm frames at a time

(six total in holder)

Slide: up to two 35 mm frames

Readable area: 1.9 × 4.9 inches

(49 × 125 mm)

AC Adapter

Input AC 100 to 120 V, 50 to 60 Hz

Output DC 24.0 to 26.4 V, 1.4 A

Temperature 41 to 95 °F (5 to 35 °C)

Scanning and Restoring Photos

If you have faded photos, slides, or negatives, you can use the

Color Restoration setting in your software to bring them back

to life.

Start EPSON Scan and select Home Mode or Professional

Mode in the Mode box at the top of the screen.

Select your settings and click the Preview button at the bottom

of the screen.

Select the Color Restoration checkbox. (In Home Mode, click

the Image Adjustments button first. In Professional Mode,

scroll to the bottom of the screen.)

For detailed steps, see the on-screen Reference Guide.

Note: You can also use the Color Restoration feature in the EPSON

Smart Panel copy utility. See the on-screen help in the copy utility for

details.

Color Restoration

checkbox

Mode box

Epson Perfection 2480 Photo

6/04 Epson Perfection 2480 Photo - 3

Using EPSON Smart Panel

To open EPSON Smart Panel, press the ]Start button on

your scanner or select EPSON Smart Panel on your desktop.

Note: In Windows, if you see a message when you press the ]Start

button, select EPSON Smart Panel, click Always use this program

for this action, then click OK.

Epson Smart Panel opens on your computer.

For details on using EPSON Smart Panel, click the ?button.

Scanning Film and Slides

The Perfection 2480 Photo scanner cover has a built-in

transparency unit (TPU). To scan film or slides, you’ll need to

remove the reflective document mat from the cover and place

the film in a holder on the scanner glass.

Tip: Make sure your negatives or slides are dust-

free for the best scan. You can also select the Dust

Removal setting in EPSON Scan to improve your scan.

1. Lift the scanner cover all the way up and slide the reflective

document mat up and off of the scanner cover.

Note: Make sure the transparency unit cable is connected to the

back of the scanner.

2. If you’re scanning film, slide it into the film holder with the

shiny base side facing down. Your images and any wording

on the film strip should appear backward on the side that

faces up.

Epson Perfection 2480 Photo

4 - Epson Perfection 2480 Photo 6/04

3. Place the film holder in the correct position for your film or

slides. For slides, place the holder on the scanner first, then

place the slides in the holder. Match the letter on the film

holder tab with the corresponding letter on the scanner.

Note: Make sure the thin, rectangular calibration windows on

both ends of the film holder are uncovered to ensure an accurate

scan.

4. Close the scanner cover.

5. To scan each film frame or slide as a separate image, press

the 4Scan and Save button or open EPSON Smart Panel

and select Scan and Save.This scans each frame or slide

using ideal settings in Full Auto Mode and opens each one

separately in ArcSoft PhotoImpression for viewing, editing,

and printing. See your on-screen Reference Guide and Smart

Panel help for instructions on selecting scan modes and

complete scanning details.

6. When you’re finished scanning, you can store the film

holder in the scanner cover. Slide the film holder into the

cover, then replace the document mat.

Position A Negatives

Scans the first 3 frames of the film strip in the 1, 2, and 3 spots

on the holder.

Position B Negatives

Scans the last 3 frames of the film strip in the 4, 5, and 6 spots

on the holder.

Position C Slides

Place the holder on the scanner glass, then put the slides in

the holder. Place the top of the image toward the top of the

scanner.

Epson Perfection 2480 Photo

6/04 Epson Perfection 2480 Photo - 5

Start Light

The scanner’s ]Start light indicates the scanner status.

Transporting the Scanner

Before transporting the scanner for a long distance or storing it

for an extended period of time, you need to lock the scanner’s

carriage to prevent damage.

1. Plug in the scanner, connect it to your computer, and wait

until the carriage moves to the home position (position

nearest the buttons). While the ]Start light is green,

unplug the scanner.

2. If the cover cable is attached, disconnect it.

3. To lock the transportation lock, lift the scanner and slide

the lock to the locked position. This secures the carriage.

Caution: Do not turn the scanner over; this may damage it.

4. Attach the protective materials and repack the scanner in its

original box.

Beliebte Scanner Handbücher anderer Marken

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung

Innova

Innova 5210 Bedienungsanleitung