Epson 3590 - Perfection Photo Bedienungsanleitung

Epson Perfection 3590 Photo

6/05 Epson Perfection 3590 Photo - 1

Scanner Parts Option

The Multi Photo Feeder (part number B813372) lets you load

up to 24 photos or business cards and scan them automatically.

See the on-screen User’s Guide for instructions.

Scanner Specifications

Basic Specifications

Scanner type Flatbed, color

Photoelectric Color CCD line sensor

device

Effective pixels 27,200 × 37,400 pixels at 3200 dpi

Document size 8.5 × 11.7 inches (216 × 297 mm)

Letter size or A4 (reading area can

be specified from software)

Scanning 3200 dpi (main scan)

resolution 6400 dpi with Micro Step (sub scan)

Output 50 dpi to 12800 dpi

resolution (50 to 6400 dpi in 1 dpi increments.

9600 dpi and 12800 dpi performed with

zoom function.)

Color separation RGB color filters on CCD

Image data 16 bits per pixel per color internal

16 bits per pixel per color external

(maximum)

Interface USB 2.0 Hi-Speed (Type B connector)

Light source White cold cathode fluorescent lamp

Dimensions Width: 10.8 inches (275 mm)

Depth: 16.5 inches (419 mm)

Height: 3.4 inches (86 mm)

Weight Approx. 7.0 lb (3.2 kg)

USB port

inlet

Option

port

Cover

cable

Document

table

Carriage and

lamp (in the

home position)

Reflective

document mat

Auto film loader (AFL)

Metal film

guide

Eject button

Scanner cover

]Start button{Copy button

|Scan to

E-mail button

aScan to

PDF button

Auto film

loader

Transportation lock

(beneath scanner;

see page 7)

Output tray

Edge guides

Cable

Epson Perfection 3590 Photo

2 - Epson Perfection 3590 Photo 6/05

Electrical

Input voltage DC 24.0 to 26.4 V

Ratedfrequency 50to60Hz

Rated current 1.4 A

Power 19.0 W operating (with AFL)

consumption 13.0 W standby mode

4.8 W sleep mode (with AFL)

Environmental

Temperature Operation: 41 to 95 °F (5 to 35 °C)

Storage: –13 to 140 °F (–25 to 60 °C)

Humidity Operation: 10 to 80%

(without Storage: 10 to 85%

condensation)

Operating Ordinary office or home conditions.

conditions Extreme dust should be avoided. Operation

under direct sunlight or near a strong light

source should be avoided.

Safety Approval

EMC FCC Part 15 Subpart B Class B

CAN/CSA-CEI/IEC CISPR 22 Class B

USB Interface

Interface type Universal Serial Bus Specification

Revision 2.0

Electrical standard Full Speed mode (12 Mbits/s) and

Hi-Speed mode (480 Mbits/s) of Universal

Serial Bus Specification Revision 2.0.

Connector type One receptacle (Type B)

AC Adapter

Input AC 100 to 120 V, 50 to 60 Hz, 1.0 A

Output DC 24.0 to 26.4 V, 1.4 A

Multi Photo Feeder Specifications

Basic Specifications

Product code B813372

Paper input Face-down loading

Paper output Face-down ejecting

Paper capacity 24 sheets (maximum thickness under 0.2

inches [6 mm])

Paper types Photo (4 × 6 and 3 × 5 inches), mini-photo

(2.25 × 3.25 inches), business card,

post card

Dimensions Width: 9.1 inches (231 mm)

Depth: 15.8 inches (401 mm)

Height: 2.0 inches (52 mm)

Weight Approx. 3.75 lb (1.7 kg)

Electrical

Rated input

voltage DC 24 V ± 10%, 5 V ± 10%

Rated input

current 24 V, 0.65 A

5 V, 0.2 A

Environmental

Temperature Operation: 50 to 86°F (10 to 30 °C)

Storage: –4 to 140 °F (–20 to 60 °C)

Humidity Operation: 20 to 80%

(without Storage: 10 to 85%

condensation)

Operating Ordinary office or home conditions.

conditions Extreme dust should be avoided. Operation

under direct sunlight or near a strong light

source should be avoided.

Safety Approval

EMC FCC Part 15 Subpart B Class B

CAN/CSA-CEI/IEC CISPR 22 Class B

Using the Scanner Buttons

See the on-screen User’s Guide for instructions on using these

buttons:

]Start

button

{Copy

button

|Scan to

E-mail button

aScan to

PDF button

Epson Perfection 3590 Photo

6/05 Epson Perfection 3590 Photo - 3

❏To start a basic scan, press the ]Start button on the

scanner. Your computer automatically starts EPSON Scan

in Full Auto Mode (or the mode you used last). From

EPSON Scan, you can select a scanning mode, and then

scan and save your image to a file on your computer.

❏To start a scan and save it as a PDF file on your computer,

press the aScan to PDF button. EPSON Scan starts and

automatically selects PDF as the file type.

❏If you want to use the scanner as a copier and automatically

scan and print your image, you can press the {Copy

button. The EPSON Copy Utility starts automatically.

❏If you want to scan an

❏image and open your e-mail program so you can attach it to

an e-mail message, you can press the |Scan to E-mail

button.

Scanning Documents and Photos

1. Open the scanner cover.

Make sure the document

mat is installed inside the

scanner cover.

2. Place your document

or photo on the

document table, face

down on the glass.

Make sure the top of

the document or

photo is against the

front edge of the

scanner and centered

on the arrow mark.

3. An area of up to 0.2 inches (5 mm) from the horizontal and

the vertical sides of the scanner glass cannot be scanned. If

you place a document in the corner of the document table,

move it up and in slightly to avoid cropping.

4. If you are scanning multiple photos at once, position each

photo at least 0.8 inches (20 mm) apart from the others.

5. Close the scanner cover gently so that your original does not

move.

Restoring Photos

Using the Color Restoration feature in EPSON Scan, you can

transform old, faded, or badly exposed photos into ones with

true-to-life color and sharpness. You can restore printed photos,

negative film, or slides automatically as you scan them.

You can use Color Restoration in EPSON Scan’s Full Auto,

Home or Professional Mode. For detailed steps, see the

on-screen User’s Guide.

Full Auto Mode

Home and Professional Mode

Epson Perfection 3590 Photo

4 - Epson Perfection 3590 Photo 6/05

Scanning Film and Slides

The top of the Perfection 3590 Photo scanner cover has an

automatic film loader that lets you load 35 mm negatives

without even opening the cover. You can use the slide holder to

scan a 35 mm slide from the scanner glass.

Before scanning negatives or a slide, lift the scanner cover all the

way up and slide the reflective document mat up and off of the

scanner cover.

Note: Make sure the cover cable is connected to the back

of the scanner.

Scanning 35 mm Negatives

1. Close the scanner cover.

2. Press and release the back of the auto film loader cover to

open it.

3. Flip out the metal film guide and press it down until it

clicks into place.

Caution: Before loading a film strip, make sure it contains at

least 2 photos, but no more than 6. Don’t load folded, creased,

curled, or sticky film into the auto film loader or it may damage

the film or your scanner.

4. Place the film strip in the film loader with the shiny base

side facing down. Your images and any wording on the film

strip should appear backward on the side that faces up.

5. Slowly slide the film into the loader. Let go of the film when

the scanner begins to automatically feed it into position.

6. When you finish scanning the film strip, press the Eject

button inside the auto film loader to eject the film. Wait for

the ]Start light to stay on green, then remove the film

strip.

Caution: Don’t turn off the scanner with a film strip loaded in the

auto film loader. Never pull film out of the loader by force.

7. Flip the film guide back inside the auto film loader and

press it down until it clicks into place.

8. Close the auto film loader cover.

Epson Perfection 3590 Photo

6/05 Epson Perfection 3590 Photo - 5

9. Replace the document mat before you resume scanning

documents or photos.

Scanning a Slide

1. Make sure you removed the reflective document mat, as

described in the previous column.

2. Place the slide holder on the top of the scanner glass so that

the tab labelled “D” fits into the area labelled “D” on the

document table.

3. Place a 35 mm slide into the holder with its shiny base side

facing down. Your image should appear backwards on the

side that faces up.

Place the top of the image toward the left side of the

scanner.

4. Close the scanner cover.

5. When you’re finished scanning, you can store the slide

holder in the scanner cover. Slide the holder into the cover,

then replace the document mat.

Epson Perfection 3590 Photo

6 - Epson Perfection 3590 Photo 6/05

Removing Dust From Film or Slides

Using the Dust Removal feature in EPSON Scan’s Full Auto,

Home, or Professional Mode, you can virtually “clean” the dust

marks from film or slides as you scan them. For detailed steps,

see the on-screen User’s Guide.

Reading the Scanner Light

The scanner’s ]Start light indicates the scanner status.

Full Auto Mode

Home and Professional Mode

]Start light Scanner status

Flashing green Warming up or scanning.

Green Ready to scan.

Flashing red Make sure the transportation lock is unlocked.

Try restarting your computer and unplugging the

scanner. Wait 10 seconds, then plug the scanner

back in.

Film may be jammed in the auto film loader.

Disconnect the scanner from the computer, wait

10 seconds, and connect it to the computer again

to see if the film ejects on its own. If film is still

jammed, see your on-screen User’s Guide.

If the red light is still flashing, contact Epson.

Off Make sure your scanner is connected to your

computer and plugged into a power source.

Epson Perfection 3590 Photo

6/05 Epson Perfection 3590 Photo - 7

If an error occurs, the scanner stops operating and the scanner

light flashes red. This indicates one of the following problems:

❏The scanner is not connected to your computer properly or

your software is not fully installed. See the Start Here sheet

that came with your scanner for instructions on installing

the scanner software and connecting the scanner to your

computer.

❏The scanner transportation lock is locked. Slide the lock to

the unlock position.

After trying these solutions, turn off the scanner by unplugging

its power cord, then plug it in to turn it back on. If the scanner

light is still flashing:

❏The scanner may be malfunctioning.

❏The scanner lamp may need to be replaced.

❏The connected optional equipment may be malfunctioning.

Transporting the Scanner

Before transporting the scanner for a long distance or storing it

for an extended period of time, you need to lock the scanner’s

carriage to prevent damage.

1. Plug in the scanner, connect it to your computer, and wait

until the carriage moves to the home position (position

nearest the buttons). While the ]Start light is green,

unplug the scanner.

2. If the cover cable is attached,

disconnect it.

3. To lock the transportation lock, lift

the scanner and slide the lock to the

locked position. This secures the

carriage.

Caution: Do not turn the scanner over; this may damage it.

4. Attach the protective materials and repack the scanner in its

original box.

Beliebte Scanner Handbücher anderer Marken

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung

Innova

Innova 5210 Bedienungsanleitung