Epson ES-1000C - Business Scanning System Bedienungsanleitung

EPSON

Printed on recycled paper with at least

10% post-consumer

content

Nofe

Concerning Responsible Use of

Copyu-gh

fed

Maferials

Like photocopiers, scanners can be misused by improper copying of copyrighted material.

Although Section

107

ofthe

U.S. Copyright Act of

1976

(Title

17,

United States Code), the

“fair use” doctrine, permits limited copying in certain circumstances, those circumstances

may not be as broad as some people assume. Unless you have the advice of a

knowledgeable attorney, be responsible and respectful by not scanning published material

without the permission

ofthe

Copyu-gh

Notice

ofthis

publication may be reproduced, stored in a retrieval

system, or transmitted in any form or by any means, electronic, mechanical, photocopying,

recording, or otherwise, without the prior written permission of Seiko Epson Corporation.

No patent liability is assumed with respect to the use

ofthe

information contained herein.

Neither is any liability assumed for damages resulting from the use

ofthe

information

contained herein.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser

ofthis

product or third parties for damages, losses, costs, or expenses incurred by purchaser or

third parties as a result

of:

accident, misuse, or abuse

ofthis

product or unauthorized

modifications, repairs, or alterations to this product.

Seiko Epson Corporation and its affiliates shall not be liable against any damages or

problems arising from the use of any options or any consumable products other than those

designated as Original EPSON Products or EPSON Approved Products by Seiko Epson

Corporation.

ES-1000C

is a trademark of Epson America, Inc.

EPSON is a registered trademark of Seiko Epson Corporation

1995

by Epson America, Inc.

Torrance, California, USA

troduc

tion

This package contains everything you need for professional

quality color scanning:

EPSON®

ES-1000C’“color

scanner, which scans in full color

(30

bit) or

grayscale

monochrome

bit)

SCSI interface card, which provides a SCSI interface for

your

IBM@

compatible computer

SCSI interface cable

Adaptec@EZ-SCSI

version 3.0 software, which enables your

computer to use the SCSI interface

EPSON Scanning Utilities (EPSON Scan! II and EPSON

TWAIN), which let you capture scanned images, export the

images in a variety of formats, calibrate your scanner, and

use the scanner’s advanced features with software

programs that support the industry standard TWAIN

interface

Adobe@PhotoshopTMa powerful image-editing program

that lets you merge and edit color images, retouch

photographs, or create new artwork

Xerox® Imaging Systems

TextBridge,TM

an optical character

recognition (OCR) program for Microsoft@ WindowsTMthat

converts hard copy and on-line images into formatted text.

This booklet tells you how to set up your scanner, install the

software, and scan an image. If you need more detailed

information after you begin scanning, consult the individual

manuals for the ES-1000C Scanner, EPSON Scanning Utilities,

Adobe Photoshop, and

TextBridge.

System and Memory

Requirements

For the scanner hardware and software to work properly, your

system must include the following minimum configuration:

386-based

(or higher)

IBM@

compatible computer or an

IBM PSI

MS-DOS@version

5.0

or higher

Microsoft Windows

3.1

or higher, or Windows NT

3.5-inch,

high-density diskette drive

At least

1OOMB

of hard disk space for scanner applications

and images

4MB of system RAM plus a permanent Windows swap file

providing 8MB to 16MB of virtual memory (a swap file of

contiguous space on your hard disk drive which Windows

can use; see your Microsoft Windows manual)

Note:

4A4B

is the minimum amount

ofRAM;

graphics

qplications

run

farter

andmore efjciently with moreRAM.

A mouse or other compatible pointing device

A Video Graphics Array (VGA) or other Windows

compatible display adapter card or built-in interface

supporting at least

colors for simple color scanning. To

adequately view an average-complexity color scan, the card

or interface must support

256

colors, while high-quality,

realistic color scans require a card supporting

million

colors.

A color monitor compatible with the card or interface you

are using.

Installing the SCSI

Interface

Card

Follow the steps below to install the SCSI interface card in your

computer. For additional information, see the manuals for your

interface card and computer.

If you are already using a SCSI adapter in your computer for

other SCSI devices, such as an external hard disk, see Chapter

of the

ES-1000C

User

Guide for inform

ation

on including the

scanner in an existing SCSI daisy-chain.

Note:

Your

SCSIadqter

must be compatible with

Adqtec

EZ-SCSI

software to use the EPSON Scanning Utilities that control your

scanner.

Turn off the computer and any peripheral devices.

Disconnect the computer’s power cable from the electrical

outlet and from the back panel. Also disconnect any other

cables, including the keyboard cable.

Remove the cover from your computer. If you need detailed

instructions, see your computer manual.

Before you touch any of the computer’s internal components,

touch an unpainted metal surface inside the computer case

to discharge any static electricity.

Choose an option slot for the interface card. You can install

the card in any available slot.

Remove the retaining screw from the option slot cover and

remove the slot cover. Keep the screw to secure the

interface card to the computer. Store the slot cover in a safe

place in case you remove the interface card later.

Unpack the interface card. When handling the card, be careful

not to touch any of the components on the circuit board or

the gold-edged connector.

Insert the card into the slot, guiding it straight down. Push

the card down

firmly

(but carefully) to insert it fully. You

should feel the card fit into place.

Secure the card to the computer with the retaining screw.

10.

Replace the cover, reconnect all the cables, and plug the

power cord into an electrical outlet.

Setting

Up the Scanner

Follow these steps to set up the scanner:

Take the scanner out of its box and place it on a flat, stable

surface with the rear panel facing you.

Remove the tape securing the scanner cover and pull out

the paper underneath the cover.

Locate the round knob in the middle of the rear panel.

Turn the knob counterclockwise. If necessary, use a coin to

loosen it. The knob has a built-in spring, so it pops out a

little when it is released. You cannot remove the knob.

Connect one end of the power cable to the power inlet on

the rear of the scanner and plug the other end into an

appropriately grounded electrical outlet as shown below.

If the scanner comes on when you plug it in, turn it off by

pressing the OPERATE button.

Warning:

Whenever you turn off the scanner, wait at least

seconds

before turning it

back

on.

Rqidly

turning it on

offcm

damage the scanner.

Connecting

the Scanner

the

Computer

Follow the steps below to connect the scanner to your

computer’s SCSI interface using the cable included with the

scanner.

Turn off your computer, scanner, and any other peripheral

devices.

Caution:

Be sure that your computer, scanner,

any other

peripheral devices are turned off before you plug in the

ccrble.

Connect one end of the SCSI cable to either the top or bottom

SCSI connector on the scanner; then fasten the connector

with the wire clamps on its side, as shown.

Connect the other end of the SCSI cable to the connector on

the SCSI interface card you installed in the computer.

Fasten the connector with the wire clamps.

Make sure the scanner’s internal SCSI terminator switch is

turned on, as shown.

Make sure the SCSI ID switch is set to

as shown

Turn on the scanner by pressing the Operate button.

Turn on your monitor and all your other peripheral devices.

Then turn on the computer. (Always turn on the scanner

before the computer.)

Installing

the

EZ-SCSI

Software

If you are running Windows NT, you do not need to install

EZ-SCSI

or the EPSON Scanning Utilities; skip to “Installing

Adobe Photoshop.”

Follow these steps to install the

Adaptec

EZ-SCSI

software:

Start Windows.

Insert the

Adaptec

EZ-SCSI

Disk 1 in a diskette drive.

From the Program Manager, open the File menu and choose

Run. The Run dialog box appears.

Type A: SETUP (or

SETUP if you used drive

in the

Command Line box and choose OK.

Choose

Install

Adaptec

EZ-SCSI.

A screen appears

identifying your SCSI interface card. Choose Continue

The next screen identifies the scanner as the GT-8500; this is

normal. Choose Continue.

The Installation Subdirectory screen appears, prompting you

for a directory for the

EZ-SCSI

program files. Choose

Install

to accept the default directory. The program copies the

files.

Follow the instructions that appear on the screen to accept

the

EZ-SCSI

default settings and insert each

EZ-SCSI

diskette.

The program modifies the

CONFIG.SYS

file

and saves a

backup copy of the original as

CONFIG.BAK.

It also creates

Adaptec

SCSI program group and its icons in Windows.

When the Installation Complete dialog box appears, choose

Reboot System to restart the computer.

Andere Handbücher für ES-1000C - Business Scanning System

Inhaltsverzeichnis

Andere Epson Scanner Handbücher

Epson

Epson Expression 1600 Bedienungsanleitung

Epson

Epson Perfection 660 Bedienungsanleitung

Epson

Epson Perfection 610 Scanner Bedienungsanleitung

Epson

Epson Expression 636 Bedienungsanleitung

Epson

Epson Perfection V33 Photo Bedienungsanleitung

Epson

Epson DS-7500 WorkForce DS-7500 Bedienungsanleitung

Epson

Epson Expression 800 Installations- und Betriebshandbuch

Epson

Epson 1250 - Perfection Photo Flatbed Scanner Bedienungsanleitung

Epson

Epson ES-800C Handbuch

Epson

Epson GT-2500 Series Bedienungsanleitung

Epson

Epson DS-80W Bedienungsanleitung

Epson

Epson Perfection V600 PHOTO Bedienungsanleitung

Epson

Epson CaptureOne 30DPM Bedienungsanleitung

Epson

Epson 1000XL Bedienungsanleitung

Epson

Epson FILMSCAN 200 Bedienungsanleitung

Epson

Epson Workforce DS-860N Bedienungsanleitung

Epson

Epson 1680 - Expression Special Edition Bedienungsanleitung

Epson

Epson 4180 - Perfection Photo Bedienungsanleitung

Epson

Epson 3170 - Perfection Photo Bedienungsanleitung

Epson

Epson ProofPlus TM-H6000III Bedienungsanleitung

Epson

Epson Perfection V33 Photo Bedienungsanleitung

Epson

Epson V500 Bedienungsanleitung

Epson

Epson Perfection V19 Bedienungsanleitung

Epson

Epson Pro GT-S80 Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung

Innova

Innova 5210 Bedienungsanleitung