Epson ES-1200C Pro PC Stücklistenhandbuch

EPSON

ES-1200C Pro

Getting Started

Tl&

mumal

is printed on 50% recycled paper, 10% post-consumer content.

system, or transmitted in any form or by any means, electronic, mechanical, photocopying,

recording, or otherwise, without the prior written permission of Seiko Epson Corporation.

No patent liability is assumed with respect to the use of the information contained herein.

Neither is any liability assumed for damages resulting from the use of the information

contained herein.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this

product or third parties for damages, losses, costs, or expenses incurred by purchaser or

third parties as a result of: accident, misuse, or abuse of this product or unauthorized

modifications, repairs, or alterations to this product.

Seiko Epson Corporation and its affiliates shall not be liable against any damages or

problems arising from the use of any options or any consumable products other than those

designated as Original EPSON Products or EPSON Approved Products by Seiko Epson

Corporation.

ES-1200C is a trademark of Epson America, Inc.

EPSON is a registered trademark of Seiko Epson Corporation.

General notice: Other product names used herein are for identification purposes only and may be

trademarks of their respective companies.

EPSON disclaims

any and all rights in those marks.

Torrance, California, USA

Introduction

This package contains all the hardware and software you need

for professional quality color scanning.

Here are the contents of your scanner package, described in the

order you’ll need to install each item:

SCSI interface card that provides a SCSI interface for your

computer

EPSON

ES-1200C™ color scanner that scans in full color (24

bit) or grayscale monochrome (8 bit)

SCSI interface cable

Adaptec

EZ-SCSI version 3.0 software, which enables your

computer to use the SCSI interface card

EPSON Scanning Utilities (EPSON Scan! II and EPSON

TWAIN). This software exports images in a variety of file

formats, calibrates your scanner, and allows you to use

software programs that support the industry standard

TWAIN interface.

Adobe

Photoshop,

version 2.5.1, which allows you to

merge and edit color images, retouch photographs, or

create new artwork

Kai’s Power Tools™ for Windows,™ plug-in software that

provides additional filters to Adobe Photoshop.

This booklet tells you all you need to set up your scanner,

install the software, and scan a photograph. It is intended to

help you get set up in the common computer environments. If

you need more detailed information after you begin scanning,

consult the individual manuals for the ES-1200C scanner,

Photoshop, Kai’s Power Tools, and the EPSON Scanning

Utilities.

System and Memory Requirements

For the scanner hardware and software to work properly, your

system must have at least the following configuration:

A 386-based or higher PC or an IBM

PS/2

machine

MS-DOS

5.0 or higher

Microsoft

Windows 3.1 or higher, or Windows NT

High-density,

3%inch

diskette drive

Hard disk drive with at least 25MB available for the

scanner applications and 35Mb available for scanned

images

4MB RAM and 8MB to 16MB of permanent virtual

memory. (Permanent virtual memory is a swap file of

contiguous space on your hard disk drive which Windows

can use as if it were RAM. See your Microsoft Windows

manual.)

Note:

4MB is the minimum amount

RAM. Graphics applications

will run better and

faster

with more RAM.

A mouse or other compatible pointing device

A Video Graphics Array (VGA) or other Windows-

compatible graphics card. (The card must support at least

16 colors for simple color scanning.) To adequately view an

average-complexity color scan, the card must support 256

colors. High-quality, realistic color scans require a card that

supports 16 million colors.

A color VGA monitor compatible with the graphics card

you are using.

Installing the Interface Card

Use this procedure to install a SCSI interface card. For more

detailed installation instructions, see the manual that came

with your card.

Turn off the computer and any peripheral devices.

Disconnect the computer’s power cable from the electrical

outlet and from the back panel. Also, disconnect any cables

that are connected to the computer, including the keyboard

cable.

Remove the cover from your computer. If you need detailed

instructions, see your computer manual.

Before you touch any of the computer’s internal

components, touch an unpainted metal surface inside the

computer’s case to discharge any built-up static electricity.

Choose an option slot for the interface card. You can install

the card in any available slot.

Remove any retaining screws from the option slot cover

and remove the slot cover. Keep the screw or screws to

secure the option card to the computer. Store the slot cover

in a safe place in case you later remove the interface card.

Unpack the interface card. When handling the card, be

careful not to touch any of the components on the circuit

board or the gold-edged connector.

Insert the card into the slot, guiding it straight down. Push

the card down firmly (but carefully) to insert it fully. You

should feel the card fit into place.

Secure the end of the card to the back of the computer with

the retaining screw or screws.

10. Replace the cover and reconnect any cables you

disconnected. Plug the power cord into an electrical outlet.

Setting Up the Scanner

Follow these steps to set up the scanner:

Take the scanner out of the box and place it on a flat, stable

surface with its rear panel facing you.

Locate the round screw knob in the middle of the rear panel.

Turn the screw counterclockwise as shown by the arrow. If

necessary, turn the screw with a coin. The screw has a

built-in spring, so it pops out a little when it is released.

You cannot remove the screw.

Firmly connect the power cable to the power inlet on the rear

of the scanner and the other end into an appropriately

grounded outlet as shown below.

If the scanner comes on

when

you plug it in, turn it off by

pressing the

OPERATE

button.

Warning:

Whenever you turn off the scanner, wait at least 10

seconds

before

turning it back on. Rapidly turning it on

and off can damage

the

scanner.

Connecting the Scanner to the Computer

Use this procedure to connect the scanner directly to the SCSI

port on your computer using the cable included in the scanner

package.

If you are already using the SCSI port on your computer for

another SCSI device, such as an external hard drive, see

Chapter

of the

ES-1200C User’s Guide

for information on

including the scanner in a daisy-chain arrangement.

Caution:

Be sure that your

computer,

scanner, and any other peripheral

devices are turned off before you plug in the cables.

Connect the 50-pin end of the cable to either the top or

bottom SCSI connector of the scanner; then fasten the

connector with the clamps on the sides of the connector, as

shown.

Plug the other end of the interface cable into the connector

of the SCSI interface card you installed in the computer.

Fasten the connector with the wire clamps.

3. Switch on the internal SCSI terminator, as shown.

Set the SCSI ID switch to 2, as shown.

Turn on the scanner, then the computer. (Always turn on the

scanner before the computer.)

Andere Handbücher für ES-1200C Pro PC

Inhaltsverzeichnis

Andere Epson Scanner Handbücher

Epson

Epson Perfection 636U Bedienungsanleitung

Epson

Epson Perfection V33 Photo Bedienungsanleitung

Epson

Epson Workforce DS-860N Bedienungsanleitung

Epson

Epson Perfection V550 Photo Bedienungsanleitung

Epson

Epson B11B200211 Bedienungs- und Wartungshandbuch

Epson

Epson Expression 10000XL Series Leitfaden

Epson

Epson GT-15000 Series Bedienungsanleitung

Epson

Epson B81306 series Bedienungsanleitung

Epson

Epson Perfection 640U Series Installationsanleitung

Epson

Epson L350 Bedienungsanleitung

Epson

Epson ES-400 II Bedienungsanleitung

Epson

Epson Pro GT-S80 Bedienungsanleitung

Epson

Epson 1640XL - Expression Graphic Arts Bedienungsanleitung

Epson

Epson 1680 - Expression Special Edition Bedienungsanleitung

Epson

Epson WorkForce DS-5500 Bedienungsanleitung

Epson

Epson 836XL - Expression - Flatbed Scanner Bedienungsanleitung

Epson

Epson SeriesPerfection 1240U Series Referenzhandbuch

Epson

Epson DS-730N Bedienungsanleitung

Epson

Epson Perfection 636 Bedienungsanleitung

Epson

Epson Perfection V100 Series Bedienungsanleitung

Epson

Epson 836XL - Expression - Flatbed Scanner Stücklistenhandbuch

Epson

Epson Perfection 1670 Photo Bedienungsanleitung

Epson

Epson GT-20000 Bedienungsanleitung

Epson

Epson DS-32000 Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung

Innova

Innova 5210 Bedienungsanleitung