Epson Expression 1600 Bedienungsanleitung

Page 1

Quick Ceph®Systems

Doc ID# 1030Expression_Setup - Revision 12-1-00

Epson Expression 1600 Scanner Setup

http:// .quickceph.com/docs/1030Expression_Setup.pdf

Installing Scanner Software

Unpack the scanner and attach the transparency adapter. Plug in the scanner and attach the cable from the scanner

to the appropriate port (FireWire, USB, or SCSI) on the computer or USB hub. If you purchased your computer

through Quick Ceph Systems, the scanner soft are ill be installed and ready to use. Skip the soft are installation

section and go to “Setting Up The Scanner Interface”.

No that you have connected the

scanner to the computer, it is time

to install the scanner soft are.

Insert the “Scanning Tools” CD-

ROM found on

the back of the

Expression man-

ual. An icon ill

appear on your

desktop. Double

click on this icon.

1The folder sho n to the

right ill open. Double

click on the icon labeled

“EPSON TWAIN Pro”.

Click on the appropriate

language and then click

on the installer icon to

install the TWAIN soft-

are. Click on “Restart”

hen prompted.

Unlocking Scanner and Transparency Adapter

Make sure your scanner and transparency adapter are unlocked. They should only be locked for storage or transport.

After the initial installation, the

Epson Screen Calibration applica-

tion ill automatically open. Use

the arro s to adjust the image until

the t o gray colors match each

other. Epson recommends a setting

of 1.8.

4When the computer boots up again, place the

PhotoShop LE CD-ROM into the computer to

install the soft are. Locate the Adobe

Photoshop 5.0 LE folder. Double click on this

folder and locate the “Install Photoshop® LE”

icon. Double click to install. Follo the installa-

tion directions, and restart hen prompted.

5Open the Adobe Photoshop 5.0 LE

folder hen the computer has

rebooted. Click once on the appli-

cation icon to select it. Go to the

File menu and select “Make Alias”.

The computer ill make an “alias”

(or “Shortcut”) of the Photoshop

program. Place this alias on the

desktop.

6Create a ne folder on

the desktop by clicking on

the File menu an select-

ing “Ne Folder”.

Rename the “Untitled

Folder” to “Scanned

Images”. This folder ill

be used to contain your

scanned X-rays.

You should also create

and place an alias of the

Quick Ceph program on

the desktop.

Your desktop should resemble

the one shown above when the

software installation has concluded.

Quick Ceph®Systems

Doc ID# 1030Expression_Setup - Revision 12-1-00

Epson Expression 1600 Scanner Setup

http:// .quickceph.com/docs/1030Expression_Setup.pdf

Once the soft are for the Epson Expression 1600 has been installed, you can begin scanning x-rays.

The follo ing section covers the recommended settings for Quick Ceph Image Pro and Quick Ceph 2000.

Lateral X-ray Orientation Panoramic X-ray Orientation

NOT : For correct orientation, patient identification on the x-rays

should face the scanner bed.

Place the x-ray on the scanner bed as sho n

above. Close the lid and double click on the

Photoshop alias, as sho n belo .

1The scanner soft-

are ill launch.

Click on the File

menu and scroll

do n to Import.

Then, select T ain

Acquire. The

scanner settings

ill appear.

Selct this setting to activate the

Transparency Adapter

Change to 8-bit Gray

Select or type in the resolution required for your specific

program:

Quick Ceph Image Pro: 72 dpi Quick Ceph 2000: 144 dpi

Change to pixels

Change settings to match those ith the arro s.

At this point, both the “Source” and “Target” set-

tings are inaccessible.

Page 2

Setting up the Scanner Interface

Click on the Previe button hen the changes have been

made. Once the image has been previe ed, you ill be able

to change the Source and Target settings.

Make sure this value is always 100%

Quick Ceph®Systems

Doc ID# 1030Expression_Setup - Revision 12-1-00

Epson Expression 1600 Scanner Setup

http:// .quickceph.com/docs/1030Expression_Setup.pdf Page 3

Setting up the Scanner Interface (cont..)

After the Previe button has been

clicked, the scanner ill launch

the Previe Windo . This in-

do allo s you to adjust the

image to gain the most clarity.

Image Controls Button:

Allo s you to modify the exposure,

gamma, highlight, shado , and

threshold settings for the image.

Tone Correction Button:

Allo s you to manually adjust the

tone settings on image.

Cursor turns into a hand hen placed inside marquee

indo . This allo s you to move the marquee indo .

Make sure all soft tissue and landmarks are visible

ithin the marquee.

Marquee indo - The image inside the

dashed lines ill be captured.

Horizontal Adjustment

Move mouse to a vertical line

until cursor displays horizontal

arro s. Click mouse and drag

to desired marquee size.

Simultaneous Adjustment

To move both, click and drag

the cursor at the vertice.

Vertical Adjustment

Move mouse to a horizontal

line until cursor displays verti-

cal arro s. Click mouse and

drag to desired marquee size.

Resizing the Marquee

The Resolution and marquee set-

tings should be changed accord-

ing to the Quick Ceph program

you are using.

NOT : Values for Target and

Source should be identical for a

1:1 scaling. When settings are

correct, click on icon to “Lock”.

Recommended Settings for

Quick Ceph Image Pro

Recommended Settings for

Quick Ceph 2000

Marquee Button:

Click here first to create a marquee.

If the image needs adjustment,

you can use both the Image

Controls or the Tone Correction

features.

For Dark X-rays:

Image Controls Windo

Increase Exposure slightly

Increase Gamma

Reduce Shado slightly

Tone Correction Windo

Click on the Tone Curve Name

and select “Lighten”.

Tone can also be manually adjusted by dragging on

the tone boxes.

Quick Ceph®Systems

Doc ID# 1030Expression_Setup - Revision 12-1-00

Epson Expression 1600 Scanner Setup

http:// .quickceph.com/docs/1030Expression_Setup.pdf Page 4

We recommend naming the files ith the name

of the patient, follo ed by the type of x-ray. This

allo s for easier identification.

After the settings are correct, you

should create a custom setting for

Quick Ceph. Click on the “Settings”

button circled belo . The indo

sho n to the right ill open.

Scanning with the Epson Expression

Type in the name you ould like to

call this setting, then click on Save,

as sho n belo . The dimensions,

resolution, and image changes ill

be saved in this setting.

Once the settings have been

selected, you can click on the

“Scan” button to begin scan-

ning. The scanner ill place

the scanned image on the

screen.

If the image is satisfactory, proceed to step 4.

Other ise, close the indo and make further adjust-

ments to the image before scanning again.

3Click on the File menu and select “Save As”. A

save dialog box ill open. You should save all

scanned files to the “Scanned Images” folder on

the desktop.

After the images have been saved, you can drag and

drop them onto Quick Ceph. You should create a

Quick Ceph alias icon on your desktop for easier

access.

Quick Scanning Tutorial

Open the Photoshop application. Go to the File menu

and select “Import”, then “T ain Acquire”. Click on the

“Previe ” button on the indo that appears.

The scanner ill bring up a pre-

vie ed image on the screen.

The resolution, Source, and

Target settings ill be reset to

the default settings.

Once you have saved the scanner settings, scanning ill become much faster. You ill not have to reinput the settings.

Follo the instructions belo for quick scanning instructions.

Click on the

“Settings” icon and

select the name of

the saved settings.

In this case, e ill

choose “Quick

Ceph Image Pro

Settings”. Once

selected, click on

“OK”.

The settings should change to the correct values for

Quick Ceph. You can then adjust the image using

either the Image Controls or the Tone Correction fea-

tures. When the image is satisfactory, click on the

“Scan” button.

After the image is scanned, you can drag and drop it

onto Quick Ceph .

4For more information about dragging and dropping x-rays

onto Quick Ceph, please consult the User Manual.

Patient Name, lateral

Quick Ceph®Systems

Doc ID# 1030Expression_Setup - Revision 12-1-00

Epson Expression 1600 Scanner Setup

http:// .quickceph.com/docs/1030Expression_Setup.pdf Page 5

Scanning Panoramic X-rays with the Epson Expression

Place the panoramic x-ray length ise on the scan-

ner bed ith the image face do n, as sho n on

page 2. You should leave a border on both sides.

Click on the Previe button sho n belo . An

image ill appear in the previe indo .

Click on the lo er left Marquee button to create a

marquee around the image. Use the Image Control

and Tone Corrections features if the image needs

adjustment.

Click on the Scan button to begin scanning the

image into the program.

Entering the Panoramic X-Ray into QCIPro and QC2000

To enter the panoramic x-ray, hold do n the “option” key on

the keyboard and drag the image onto the QCIPro or

QC2000 icon. The indo ith the cropping tools ill

appear as before, but the x-ray image ill be centered

bet een t o horizontal hite borders, one above and one

belo . Crop the image using the cropping square for the

larger image as sho n. Once the image is cropped, click

outside the cropping indo to capture. Click on the Extra 1

x-ray image in the Input Dialog Box to store the image.

Use this square to resize the cropping

indo for panoramic x-rays.

Rotating the Panoramic X-Ray

To rotate the image after it is scanned, click on the Image

Menu and select the “Rotate Canvas” option. The program

allo s you to rotate the image depending on the original ori-

entation. The example sho n above ould be rotated “90º

CW”.

Save the scanned image as described on page 4.

Quick Ceph®Systems

Doc ID# 1030Expression_Setup - Revision 12-1-00

Epson Expression 1600 Scanner Setup

http:// .quickceph.com/docs/1030Expression_Setup.pdf Page 6

Scanning 3-layers with the Epson Expression

EDIU LAYER

At times, you may require more clarity in your x-rays. This page explains how to capture 3 different layers of the x-ray necessary

for the 3 x-ray layer enhancement capability of QC Pro and QC2000. Please note that x-rays vary in density so the settings we pro-

vide are to be used only as guidelines. TIP: Scan the edium Layer first. Then, make corrections for light/dark layers.

LIGHT LAYER

DARK LAYER

This layer should be scanned first.

The Gamma setting should be left at

the default setting. The medium set-

ting emphasizes the cranial bone

structure.

Click the “Scan” button and save the

image. Make sure the file name is

unique (i.e. Jane Doe, Medium).

Click on the circled arro or drag the

slider on the Gamma setting to the

right to lighten the image. You

should make sure the image displays

the soft tissue adequately.

Click the “Scan” button and save the

image. Make sure the file name is

unique (i.e. Jane Doe, Light).

After scanning, select all three images from the “Scanned

Images” folder and drag them onto the QCIPro or QC2000

icon. One of the three images ill appear. Frame the

image, but do not resize the indo , as this ill distort the

calibration of the x-ray. Click outside the image indo

after you finish framing. The Input Dialog Box ill appear.

Make sure the “three x-ray layers” option is checked, then

click on the lateral x-ray. The three images ill be entered into

the program. Click on the nhancement tool to combine all 3

layers of the x-ray for an enhanced and easy to trace image.

Click on the circled arro or drag the

slider on the Gamma setting to the

left to darken the image. You should

notice a considerable increase in the

clarity of the teeth.

Click the “Scan” button and save the

image. Make sure the file name is

unique (i.e. Jane Doe, Dark).

Andere Handbücher für Expression 1600

Inhaltsverzeichnis

Andere Epson Scanner Handbücher

Epson

Epson GT-7000 Photo Bedienungsanleitung

Epson

Epson Perfection V800 Photo Bedienungsanleitung

Epson

Epson WorkForce DS-5500 Bedienungsanleitung

Epson

Epson Perfection 3200 Pro Bedienungsanleitung

Epson

Epson 00000650 - Perfection 3200 PRO Color Scanner Merkblatt

Epson

Epson DS-50000 WorkForce DS-50000 Bedienungsanleitung

Epson

Epson 00000650 - Perfection 3200 PRO Color Scanner Bedienungsanleitung

Epson

Epson DS-860 Bedienungsanleitung

Epson

Epson 1640XL - Expression Graphic Arts Bedienungsanleitung

Epson

Epson Perfection 610 Scanner Bedienungsanleitung

Epson

Epson 4490 - Perfection Photo Installations- und Betriebshandbuch

Epson

Epson GT-30000 Series Bedienungsanleitung

Epson

Epson PERFECTION V10 Bedienungsanleitung

Epson

Epson Expression 800 Bedienungsanleitung

Epson

Epson Expression 1600 Bedienungsanleitung

Epson

Epson Perfection 4870 Photo Bedienungsanleitung

Epson

Epson EPSON R 4990 Bedienungsanleitung

Epson

Epson 1680 - Expression Special Edition Bedienungsanleitung

Epson

Epson Perfection 1670 Photo Bedienungsanleitung

Epson

Epson B11B253205 Bedienungsanleitung

Epson

Epson Expression 800 Abmessungen

Epson

Epson ES-800C Abmessungen

Epson

Epson ES-600C Bedienungsanleitung

Epson

Epson Perfection V200 Photo Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung