Epson Perfection 636 Kurzanleitung

IMPORTANT

Windows®98

Scanner Software Installation

After you set up and connect your scanner as described in the Scanner

Basics book, follow the steps in this booklet to install the scanner

software and creative software on a Windows 98 system. Do not

follow the steps in the book.

If You’re Running Windows 98 . . .

Depending on how your computer system was originally set up, you

may be asked to insert your Windows 98 operating system CD-ROM

during scanner installation. Please have your Windows CD-ROM

handy in case you need it.

Note: If the Startup window opens at any time while you’re following

these steps, click the close box in the upper right corner to close it.

1. Turn on your scanner first; then turn on your computer. A screen

appears saying that your system has detected new hardware. The

software for the SCSI board (SCSI controller) is automatically

installed. Then you must install the scanner software.

Note: If your system doesn’t automatically detect the SCSI board,

see page 68 of the Scanner Basics book for troubleshooting help.

If the following dialog box appears, click Cancel and continue

with step 2.

Click Cancel

636slip.fm Page 1 Tuesday, October 13, 1998 3:38 PM

Note: If you press Next by mistake, click Back, then click

Cancel. If you have any other problems, see page 68 of your

Scanner Basics book for troubleshooting solutions.

2. Insert the scanner CD-ROM in the CD-ROM drive. The

EPSON screen appears, followed by the License Agreement. Read

the agreement, then click AGREE to continue.

Note: If the CD-ROM doesn’t start automatically, click Start,

Run, and type

:\EPSON (where

is your CD-ROM drive

letter). Then click OK.

3. When the Setup reminder screen appears, verify you’ve installed

the hardware correctly, then click Yes.

4. When the Scanner Software Installation screen appears, click

Install. The LaserSoft Scan Software for EPSON Perfection 636

is installed first. Follow the instructions on screen to install the

software. When that installation is complete, EPSON TWAIN is

installed (you won’t see any activity on screen).

5. After the software is installed, you must restart your computer

when prompted. Be sure to leave the CD-ROM in the drive. After

you restart, you see this prompt. Click OK.

6. You see this dialog box asking you to provide the location of the

EPSON TWAIN files on your CD-ROM. Click Browse.

Click

Browse

636slip.fm Page 2 Tuesday, October 13, 1998 3:38 PM

7. You see the Open dialog box. Select your CD-ROM drive letter in

the Drives pull-down list. In the Folders box, click the twain

folder and then click the win98 folder.

When the folder path reads

:\twain\win98 (where

is your

CD-ROM drive letter), click OK.

8. You see the New Hardware Found dialog box asking for the

location of an .inf file. Make sure the Copy files from box shows

:\twain\win98 (where

is your CD-ROM drive letter). Then

click OK.

9. You see the EPSON TWAIN 3 Setup window.

Note: If you don’t see the EPSON TWAIN 3 Setup window, it

may be behind the Main Menu screen. Hold down the Alt key

and press Tab to move the window to the front.

Make sure that SCSI is selected in the Interface pull-down list and

Perfection 636 appears in the Port Id list. (If not, see page 68 of

the Scanner Basics book for troubleshooting instructions.)

10. Place a document face down on the scanner’s document table

glass.

11. Click Test to check the connection. The scanner scans the

document and if everything is properly installed and connected,

an image appears in the window.

Select the

twain\win98

folder

Select your

CD-ROM

drive letter

636slip.fm Page 3 Tuesday, October 13, 1998 3:38 PM

12. Click OK to close the EPSON TWAIN 3 Setup window.

The Screen Calibration window appears. You must calibrate your

screen and scanner to reproduce images closely matching the

originals.

13. Move the slider in the Screen Calibration window to the right or

left until the shades of the horizontal gray stripes appear similar.

View the screen from a short distance. The gray stripes will not

perfectly blend together; however, try to make the two tones

match as closely as possible.

14. Click OK to register the calibration setting.

Installing the Creative Software with Windows 98

1. To install the creative software that came on your scanner

CD-ROM, click Start and Run. At the prompt, type

:\EPSON

(where

is your CD-ROM drive letter) and click OK.

2. After a moment, you see the EPSON installer Main Menu. Click

Creative Software, select the software you want to install, and

click Install.

3. Follow the instructions on screen and in “Install the Creative

Software” beginning on page 28 of your Scanner Basics book.

Note: Some of the creative software installers require you to restart

your system. To return to the EPSON installer, repeat the steps above.

EPSON is a registered trademark of SEIKO EPSON CORPORATION. Perfection is a

trademark of Epson America, Inc.

General Notice: Other product names used herein are for identification purposes only and

may be trademarks of their respective companies.

Torrance, California, USA 10/98

636slip.fm Page 4 Tuesday, October 13, 1998 3:38 PM

Andere Handbücher für Perfection 636

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Epson Scanner Handbücher

Epson

Epson Perfection 1670 Photo Bedienungsanleitung

Epson

Epson Apex Plus 20 Bedienungsanleitung

Epson

Epson DS-30 WorkForce DS-30 Bedienungsanleitung

Epson

Epson WorkForce 610 Series Bedienungsanleitung

Epson

Epson Expression 10000XL Series Bedienungsanleitung

Epson

Epson ES-800C Bedienungsanleitung

Epson

Epson Perfection 3490 Photo Bedienungsanleitung

Epson

Epson GT-20000 Bedienungsanleitung

Epson

Epson Perfection V700 Series Bedienungsanleitung

Epson

Epson GT-15000 Series Bedienungsanleitung

Epson

Epson DS-530 Bedienungsanleitung

Epson

Epson Perfection 640U Series Bedienungsanleitung

Epson

Epson Perfection V19 Bedienungsanleitung

Epson

Epson ES-300GS Bedienungsanleitung

Epson

Epson ES-800C Abmessungen

Epson

Epson PowerLite 1260 Bedienungsanleitung

Epson

Epson 3170 - Perfection Photo Bedienungsanleitung

Epson

Epson CaptureOne TM-S1000 Bedienungsanleitung

Epson

Epson Expression 636 Installations- und Betriebshandbuch

Epson

Epson Perfection V370 Photo Bedienungsanleitung

Epson

Epson FILMSCAN 200 Bedienungsanleitung

Epson

Epson 1640SU - Perfection Photo Scanner Abmessungen

Epson

Epson DS-780N Bedienungsanleitung

Epson

Epson GT-20000N Pro Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung