Epson Perfection V100 Series Installations- und Betriebshandbuch

Epson Perfection V100 Photo

7/06 Epson Perfection V100 Photo - 1

Scanner Parts Scanner Specifications

General

Mechanical

Electrical

Note:

Check the label on the AC adapter or on the back of the scanner for

voltage information.

Scanner

]Start button

aScan to PDF

button

Status light

{Copy button

|Scan to E-mail button

Document mat

Document

table glass

Carriage

DC power

inlet

USB interface

connector

Scanner type Flatbed color

Photoelectric device Color CCD line sensor

Effective pixels 27,200 ×37,440 pixels at 3200 dpi

Document size Documents or photos:

8.5 ×11.7 inches (216 ×297 mm)

US letter or A4 size

Film or slides:

35mm film strips (6 frames at a time);

35mm slides (4 slides at a time)

Scanning resolution 3200 dpi (main scan)

9600 dpi with Micro Step Drive ™

(sub scan)

Output resolution 50 to 6400, 9600, and 12800 dpi

(50 to 6400 dpi in 1 dpi increments)

Scanning speed

(reflective)

Approximately 4.0 msec per line at

600 dpi

Approximately 14.6 msec per line at

3200 dpi

Image data 16 bits per pixel per color internal

16 bits per pixel per color external

(maximum)

Interface One USB 2.0 Hi-speed port

Light source White cold cathode fluorescent lamp

Dimensions Width: 16.9 inches (430 mm)

Depth: 11 inches (280 mm)

Height: 2.2 inches (57 mm)

Weight Approx. 5.7 lb (2.6 kg)

Rated voltage DC 13.5 V

Rated current 1.5 A

Power consumption 16 W operating

13 W stand-by mode

3.5 W sleep mode

Epson Perfection V100 Photo

2 - Epson Perfection V100 Photo 7/06

AC Adapter (A391UC)

Environmental

USB Interface

Standards and Approvals

Scanner

AC Adapter

Using the Scanner Buttons

Before using the scanner buttons, make sure you have installed

Epson Scan and the other software that came with the scanner.

For details on using the buttons, see the on-screen User’s Guide.

Placing Documents or Photo

Caution:

Do not place heavy objects on the document table glass and do not

press the glass with too much force.

1. Open the scanner cover.

Make sure the document mat is installed inside the cover. If

it is not installed, see page 6 for instructions.

Rated input voltage AC 100 to 120 V

Rated input current 0.6 A

Ratedfrequency 50to60Hz

Rated output voltage DC 13.5 V

Rated output current 1.5 A

Temperature Operating 41 to 95 °F (5 to 35 °C)

Storage –13 to 140 °F (–25 to 60 °C)

Humidity Operating 10 to 80%, without condensation

Storage 10 to 85%, without condensation

Operating

conditions

Ordinary office or home

conditions. Avoid operating the

scanner in direct sunlight, near a

strong light source, or in extremely

dusty conditions.

Interface type Universal Serial Bus Specification Revision

2.0

Interface standard Full Speed mode (12 Mbits per second)

and Hi-Speed mode (480 Mbits per

second) of Universal Serial Bus

Specification Revision 2.0.

Connector type One Type B port

EMC FCC Part 15 Subpart B Class B

CAN/CSA-CEI/IEC CISPR 22 Class B

Safety UL60950-1

CAN/CSA-22.2 No. 60950-1

EMC FCC Part 15 Subpart B Class B

CAN/CSA-CEI/IEC CISPR22 Class B

Button Function

]Start Scans and saves the captured image.

{Copy Scans and sends the captured image to the Epson

Copy Utility.

|Scan to

E-mail

Scans and sends an e-mail message with the

scanned image attached.

aScan to PDF Scans an image or document page and saves it as a

PDF file.

Epson Perfection V100 Photo

7/06 Epson Perfection V100 Photo - 3

2. Place your document or photo on the document table, face

down on the glass. Make sure the upper left corner of the

document or photo is against the corner of the scanner, next

to the arrow mark.

3. An area 0.12 inch (3 mm) from the horizontal and the

vertical sides of the scanner glass cannot be scanned. If you

place a document in the corner of the document table,

move it up and in slightly to avoid cropping.

4. If you are scanning multiple photos at once, position each

photo at least 0.8 inch (20 mm) apart from the others.

5. Close the scanner cover gently so that your original does not

move.

Note:

Always keep the document table clean.

Do not leave photos on the document table for an extended

period of time as they may stick to the glass.

Placing Large or Thick Documents

When you scan a large or thick document, you can open the

scanner cover all the way, so that it lies flat next to the scanner.

1. Open the scanner cover.

2. Pull the scanner cover straight up.

Maximum unreadable area of

0.12 inch (3 mm)

Maximum

unreadable area of

0.12 inch (3 mm)

Epson Perfection V100 Photo

4 - Epson Perfection V100 Photo 7/06

3. Lay the cover down flat next to the scanner.

Note:

When scanning without the scanner cover, gently press down on

your document to flatten it.

4. When you are finished scanning, replace the scanner cover.

Placing Film or Slides

Removing the Document Mat

To scan film strips or slides, you need to remove the document

mat from the scanner cover. This uncovers the transparency

unit window so your scanner can use it to scan your film or

slides.

1. Open the scanner cover and gently slide up the document

mat to remove it.

2. Use a non-abrasive microfiber cloth to wipe the document

table before placing your film or slides.

To place film for scanning, see the next section.

To place slides for scanning, see page 5.

Placing Film in the Holder

1. Open the cover of the 35 mm film strip holder.

2. Slide your film strip all the way into the film holder with the

shiny base side facing down. Your images and any wording

on the film strip should appear backwards on the side that

faces up.

Note:

Hold the edge of the film gently or use gloves to touch the film;

otherwise you may damage the film.

Make sure the white stickers on the back of the film holder and

the areas around them are not scratched, dusty, or covered in

any way. If the areas are obscured, the scanner may have trouble

recognizing your film in Full Auto Mode.

Do not cover the small holes in the film holder.

3. Close the cover and press it down until you hear a click.

Epson Perfection V100 Photo

7/06 Epson Perfection V100 Photo - 5

4. Make sure the film strip is placed as shown.

5. Place the film holder on the document table so that it is

aligned as shown. Make sure the tab with the film icon on

the film holder fits into the area with the same icon on the

scanner.

6. Make sure you removed the document mat. See page 4.

7. Close the scanner cover.

When you are finished scanning film, be sure to replace the

document mat before scanning documents or photos. See

page 6.

Placing Slides in the Holder

You can scan up to four 35 mm slides at a time using the slide

portion of the film holder.

Note:

Make sure the white stickers on the back of the film holder and the

areas around them are not scratched, dusty, or covered in any way. If

the areas are obscured, the scanner may have trouble recognizing

your slides in Full Auto Mode.

Do not cover the small holes on the film holder.

1. Place the film holder on the document table so that it is

aligned as shown. Make sure the tab with the slide icon on

the film holder fits into the area with the same icon on the

scanner.

2. Place up to four slides in the film holder with the shiny base

side facing down. Your images should appear backwards on

the side that faces up. Your images should be oriented as

shown.

Note:

Make sure you place the long edge of the slide in the film holder

as shown above, for both landscape and portrait-oriented photos.

3. Make sure you removed the document mat. See page 4.

4. Close the scanner cover.

When you are finished scanning slides, be sure to replace

the document mat before scanning documents or photos.

See page 6.

Epson Perfection V100 Photo

6 - Epson Perfection V100 Photo 7/06

Storing the Film Holder

When you are not using the film holder, you can store it inside

the scanner cover.

1. Open the scanner cover and remove the document mat. For

instructions, see page 4.

2. Slide the film holder into the scanner cover.

3. Replace the document mat. See the next section for

instructions.

Replacing the Document Mat

Replace the document mat by sliding it into the notches in the

scanner cover. Make sure the white surface faces outwards.

Scanning and Restoring Photos

Using the Color Restoration feature in Epson Scan, you can

transform old, faded, or badly exposed photos into ones with

true-to-life color. You can restore printed photos, negative film,

or slides automatically as you scan them.

You can use Color Restoration in Epson Scan’s Full Auto,

Home, or Professional Mode. For detailed steps, see the

on-screen User’s Guide.

Full Auto Mode

Home Mode Professional Mode

Epson Perfection V100 Photo

7/06 Epson Perfection V100 Photo - 7

Removing Dust From Photos, Film, or

Slides

Using the Dust Removal feature in Epson Scan’s Full Auto,

Home, or Professional Mode, you can virtually “clean” the dust

marks from printed photo, film, or slides as you scan them. For

detailed steps, see the on-screen User’s Guide.

Fixing Backlit Photos

Using the Backlight Correction feature in Epson Scan’s Home

or Professional Mode, you can remove shadows from photos

that have too much background light. You can fix printed

photos, film, or slides automatically as you scan them. For

detailed steps, see the on-screen User’s Guide.

Note:

Backlight Correction is not available in Full Auto Mode.

Reading the Status Light

If an error occurs, the scanner stops operating and the status

light flashes red. This indicates the scanner is not connected to

your computer properly or your software is not fully installed.

See the Start Here sheet that came with your scanner for

instructions on installing the scanner software and connecting

the scanner to your computer.

After trying these solutions, unplug the scanner, then plug it

back in.

If the scanner light is still flashing:

❏The scanner may be malfunctioning.

❏The scanner lamp may need to be replaced.

Contact Epson. See the on-screen User’s Guide for details.

Full Auto Mode

Home Mode Professional Mode

Epson Perfection V100 Photo

8 - Epson Perfection V100 Photo 7/06

Transporting the Scanner

Before transporting the scanner for a long distance or storing it

for an extended period of time, the scanner’s carriage needs to

be in the center position to prevent damage.

1. Make sure the carriage is in the center position of the

scanner.

❏If the scanner is plugged in and connected to your

computer, the carriage will move to the center position

after scanning.

❏If the scanner is turned off and the carriage is not in the

center position, plug in the scanner, connect it to your

computer, and wait about 15 seconds for the carriage to

move to the center position.

2. Unplug the AC adapter to turn the scanner off.

3. Attach the packing materials that came with the scanner,

then repack the scanner in its original box or a similar box

that fits the scanner snugly.

Beliebte Scanner Handbücher anderer Marken

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung

Innova

Innova 5210 Bedienungsanleitung