Ergotron Peanut Bedienungsanleitung

1 of 2

300-5611-00 rev. B • 06/16

Built with Anthro-DNA™

The Peanut

Product Part#

The Peanut PT1GMPW3

The Peanut for Tablets PT2GMPW3

For the latest User Installation Guide please visit: www.ergotron.com

User's Guide

NOTE: The Peanut, Tall, is shown. The tablet and keyboard are not included.

2 of 4

300-5611-00 rev. B • 06/16

TOOLS

The Peanut comes with these tools:

• 3-way wrench

Not provided, but suggested:

• 7/16" nut driver

• 3/8" nut driver

PARTS LIST

Before beginning assembly of The Peanut, please review

the parts list to verify that your shipment is complete.

Product Quantity Part Number

01 Shelf 1

for The Peanut 225-4834-00

for The Peanut for Tablets 225-4837-00

02 Handle (installed on shelf) 1 125-5411-00

03 Column Assembly 1

for The Peanut 500-1108-00

for The Peanut for Tablets 500-1109-00

04 Cable Sleeve 1 280-5056-00

05 Base 1 225-4833-00

06 Casters, Non-locking 2 150-5117-00

07 Casters, Locking 2 150-5118-00

08 1/4-20 Nylock Nut 24 325-5259-00

09 VESA Tilt Assembly 1 835-5639-00

for Peanut for Tablets

10 Easel Assembly 1 835-5640-00

for Peanut for Tablets

11 #10-24 x 0.75" Flat Head Screw 2 325-5270-00

for Peanut for Tablets (not shown)

For Peanut for Tablets:

3 of 2

300-5611-00 rev. B • 06/16

Locking Casters

1/4-20 Nylock Nuts

325-5259-00

1/4-20 Nylock Nuts

325-5259-00

1/4-20 Nylock Nuts

325-5259-00

#10-24 x 0.75” Flat-hd Screw

325-5270-00

STEP 1 - ATTACH THE CASTERS TO THE BASE

Lay the base upside down on work surface or oor.

Align the mounting holes in each caster plate with the bolts sticking

out of the base. Locking casters (with tabs as shown) attach to the

longer base legs.

Attach each caster with four nylock nuts using a 7/16" nut driver.

STEP 2 - ATTACH BASE TO THE COLUMN

Align mounting holes in base with bolts

sticking out of the bottom of the

column.

Attach the base with four nylock nuts

using a 7/16" nut driver.

STEP 3 - ATTACH SHELF TO COLUMN AND CABLE SLEEVE

Stand the column up on its casters.

Align mounting holes on column with

bolts in shelf so the handle is over the

locking casters.

Attach the shelf with four nylock nuts

using a 7/16" nut driver.

Slip the Cable Sleeve over the tube and

press into place.

STEP 4 - ATTACH VESA MOUNT TO COLUMN

Rotate VESA plate on mounting assembly so it can lay at.

Align mounting holes in mounting assembly with holes in top of

column.

Attach VESA mounting assembly with two hex bolts using 1/8" hex key.

4 of 4

300-5611-00 rev. B • 06/16

3/8” Acorn Nut

325-5023-00

All trademarks are the property of their respective companies. Anthro is a registered trademark and brand of Ergotron Inc.

Anthro-DNA is a trademark of Ergotron Inc.

STEP 5A - ATTACH DEVICE HOLDER TO VESA PLATE

Align device holder with the VESA plate so the four threaded studs on

the holder line up with four holes on the plate.

Attach the device holder to the plate with four acorn nuts using your

3/8" driver.

To adjust the device holder, loosen the adjustment knobs at the back of

the device holder, slide the top of the holder into position, then tighten

the knobs.

STEP 5B - ATTACH TABLET CASE TO VESA PLATE

Align the holes in the back of your tablet case with the four outer holes

in the VESA mount.

Attach monitor with mounting screws that come with the case.

CONGRATULATIONS! YOUR CART ASSEMBLY IS COMPLETE!

For local customer care phone numbers visit: http://contact.ergotron.com

For Service visit: www.ergotron.com

For Warranty visit: www.ergotron.com/warranty

Dieses Handbuch passt für folgende Modelle

Andere Ergotron Outdoor-Wagen Handbücher

Ergotron

Ergotron LTSC20 Series Bedienungsanleitung

Ergotron

Ergotron StyleView SV42 Bedienungsanleitung

Ergotron

Ergotron CareFit Slim LCD Cart with Drawer Bedienungsanleitung

Ergotron

Ergotron StyleView SV41 Bedienungsanleitung

Ergotron

Ergotron Styleview SV22-92026 Bedienungsanleitung

Ergotron

Ergotron StyleView SV44 Bedienungsanleitung

Ergotron

Ergotron PS Laptop Cart Bedienungsanleitung

Ergotron

Ergotron PS Laptop Cart Bedienungsanleitung

Ergotron

Ergotron CareFit Pro Bedienungsanleitung

Ergotron

Ergotron STYLEVIEW SV42-3162-1 Bedienungsanleitung

Ergotron

Ergotron LX Desk Mount LCD Arm Bedienungsanleitung

Ergotron

Ergotron SV Tablet Cart Bedienungsanleitung

Ergotron

Ergotron STYLEVIEW SV42-7202-1 Bedienungsanleitung

Ergotron

Ergotron YES36 Bedienungsanleitung

Ergotron

Ergotron Dell Network Ready/Unmanaged Charging Cart 30... Bedienungsanleitung

Ergotron

Ergotron ERGITD-010 Bedienungsanleitung

Ergotron

Ergotron STYLEVIEW SV42-3262-1 Bedienungsanleitung

Ergotron

Ergotron STYLEVIEW SV42-3362-1 Bedienungsanleitung

Ergotron

Ergotron STYLEVIEW SV44-22C2-1 Bedienungsanleitung

Ergotron

Ergotron StyleView SV44-12B1-1 Bedienungsanleitung

Ergotron

Ergotron CareFit Pro Bedienungsanleitung

Ergotron

Ergotron StyleView Bedienungsanleitung

Ergotron

Ergotron ERGITD-013 Bedienungsanleitung

Ergotron

Ergotron ERGITD-015 Bedienungsanleitung

Beliebte Outdoor-Wagen Handbücher anderer Marken

Costway

Costway TH10057 Bedienungsanleitung

Vivo

Vivo CART-PC02S Bedienungsanleitung

VEVOR

VEVOR SC01 Bedienungsanleitung

Carts Vermont

Carts Vermont 20 Bedienungsanleitung

Vivo

Vivo CART-PC01 Bedienungsanleitung

Costway

Costway TL0400 Bedienungsanleitung

XPOtool

XPOtool 30261 Bedienungsanleitung

Branick

Branick 130 Gebrauchs- und Pflegehandbuch

Anthro

Anthro PrinterCart Bedienungsanleitung

Westward

Westward 2CZY4 Service-Handbuch

Hupfer

Hupfer TTW/V Bedienungsanleitung

Gorilla Carts

Gorilla Carts GCR-10P Bedienungsanleitung

Numatic

Numatic EcoMatic EM-5 Bedienungsanleitung

Bosch

Bosch XL-Cart Montageanleitung

Tennsco

Tennsco Modular Cart Top Component Assembly Bedienungsanleitung

Makita

Makita DCU601 Bedienungsanleitung

Clam

Clam POLAR TRAILER HD MAX Bedienungsanleitung

Trinity

Trinity 1569839 Bedienungsanleitung