Ergotron LX Desk Mount LCD Arm Bedienungsanleitung

1 of 12

888-45-047-W-05 rev.U • 12/18

LX Wall Mount Keyboard Arm

www.ergotron.com | USA: 1-800-888-8458 | Europe: +31 (0)33-45 45 600 | China: 400-120-3051 | Japan: [email protected]

English, Español, Français, Deutsch, Nederlands, Italiano, Svenska, 日本語, 汉语

English

For the latest User Installation Guide please visit: www.ergotron.com

2 of 12

888-45-047-W-05 rev.U • 12/18

AB CD

0 - 5 lbs

(0 - 2.3 kg)

4mm

180° 360°

180°

13" (330 mm)

1x 1/8"

10-24 x 1/2"

1x 2.5mm

M8 x 80mm

13mm

7mm

M4 x 8mm

1x 1x

90°

5°

3°3°

M4 x 14mm

Ø 3/8” (10mm)

Ø 3/16" (5mm)

Tools Needed

Components

Concrete Wall Mounting

Wood Stud Mounting

Stud Finder

3 of 12

888-45-047-W-05 rev.U • 12/18

5’0” - 6’4”

(152-185cm)

22.5”

(571mm)

31.5”

(800mm)

35.4”

(899mm)

5’0” - 6’4”

(152-185cm)

26.4”

(670mm)

14.8”

(377mm)

2.5”

(63mm)

17.7”

(449mm) 20.7”

(526mm)

0.6”

(14mm)

1.8”

(46mm)

8.3”

(211mm)

This mounting height is a recommendation for an ergonomic workstation that accommodates user heights of 5'0"-6'4"

(152-185cm) when set up for standing .

If user heights are dierent than this, you should change mounting height to accommodate user heights. (Change mount-

ing height one inch for every one inch dierence in user heights).

Mounting Height for Ergonomic Workstation

Determine mounting location:

Top view showing range of motion when pulled out from the wall.

Front view with arm pushed back against the wall.

4 of 12

888-45-047-W-05 rev.U • 12/18

10-24 x 1/2"

1/8"

5 6 7

4.1"

(104mm)

1.125"

(28.6mm)

(152mm)

33"

(838 mm)

To Floor

CAUTION: Make sure the wall mount bracket is level,

ush and snug to the wall surface. DO NOT OVERTIGHT-

EN THE BOLTS.

WARNING: Ensure that the wall structure is capable

of supporting four times the total weight of mounted

equipment. Mounting to wall surfaces that do not meet

this criteria may result in an unstable, unsafe condition

which could lead to personal injury and/or property

damage. Consult a construction professional if you

have any doubt about what this means in regard to

your particular application.

Concrete

Ergotron product

Wood

Optional locking feature

(customer supplied lock)

5 of 12

888-45-047-W-05 rev.U • 12/18

1/8"

10-24 x 1/2"

10-24 x 5/8"

Ergotron product

NOTE: Fasteners may unwind due to vibration caused by move-

ment of mounting solution over time. Inspect mounting solution

for loose fasteners on a routine basis. If desired, apply a light duty

thread locking adhesive to fasteners before installation to prevent

back-out.

When attaching to Pole Clamps, use 10-24 x 5/8”

screws included with pole brackets, Do NOT use

10-24 x 1/2” screws

NOTE: Wall Track and Brackets sold separately.

6 of 12

888-45-047-W-05 rev.U • 12/18

bacd

13 mm

M8 x 80mm

Ø 3/16"

(5 mm)

Wood Stud Mounting

Stud Finder

7 of 12

888-45-047-W-05 rev.U • 12/18

13 mm

M8 x 80mm

3-1/8"

(80 mm)

Ø 3/8"

(10 mm)

cde

Concrete Wall Mounting

WARNING:

Mounting holes must be at least 3-1/8” (80mm) deep and must be located within solid concrete, not mortar or covering material.

If you drill into an area of concrete that is not solid, reposition mounting holes until both anchors can be fully inserted into solid

concrete!

WARNING:

Anchors that are not fully set in solid concrete will not support the applied load resulting in an unstable, unsafe condition which

could lead to personal injury and/or property damage. Consult a construction professional if you have any doubt about what this

means in regard to your particular situation.

8 of 12

888-45-047-W-05 rev.U • 12/18

WARNING

3ab

M4 x 8mm

WARNING! Stored Energy Hazard: The arm mechanism is under tension and will move up rapidly, on its own, as

soon as attached equipment is removed. For this reason, DO NOT remove equipment unless the arm has been

moved to the highest position! Failure to follow this instruction may result in serious personal injury and/or

equipment damage!

9 of 12

888-45-047-W-05 rev.U • 12/18

5abc

ghi

CABLE ROUTING

Leave Slack in cable

10 of 12

888-45-047-W-05 rev.U • 12/18

4mm

2.5mm

Adjustment Step

Important! You will need to adjust this product after installation is complete. Make sure all your equipment is

properly installed on the product before attempting adjustments. This product should move smoothly and easily

through the full range of motion and stay where you set it. If movements are too easy or difﬁcult or if product

does not stay in desired positions, follow the adjustment instructions to create smooth and easy movements.

Depending on your product and the adjustment, it may take many turns to notice a difference. Any time

equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you

should repeat these adjustment steps to ensure safe and optimum operation.

Lift – Up and down

CAUTION: DO NOT overtighten fasteners.

Overtightening may cause damage to your

equipment.

Increase Lift Strength

If the mounted weight is too heavy or

this product does not stay up when

raised, then you'll need to increase

Lift Strength:

Decrease Lift Strength

If the mounted weight is too light or

this product does not stay down when

lowered, then you'll need to decrease

Lift Strength:

Arm Swing – Side-to-side

Increase Friction

If this product moves too easily, then

you'll need to increase friction:

Decrease Friction

If this product is too difﬁcult to move,

then you'll need to decrease friction:

Andere Handbücher für LX Desk Mount LCD Arm

Inhaltsverzeichnis

Andere Ergotron Rack & Stand Handbücher

Ergotron

Ergotron DS100 Series Bedienungsanleitung

Ergotron

Ergotron LX Desk Mount LCD Arm Bedienungsanleitung

Ergotron

Ergotron HX Bedienungsanleitung

Ergotron

Ergotron DS100 Series Bedienungsanleitung

Ergotron

Ergotron LX Dual Side-by-Side Arm Bedienungsanleitung

Ergotron

Ergotron 97-527-009 Bedienungsanleitung

Ergotron

Ergotron Tablet Management Wall Mount 10 Bedienungsanleitung

Ergotron

Ergotron DS100 Series Bedienungsanleitung

Ergotron

Ergotron 97-582-009 Bedienungsanleitung

Ergotron

Ergotron Power Strip Bedienungsanleitung

Ergotron

Ergotron Grommet Mount Kit Bedienungsanleitung

Ergotron

Ergotron LX Series Bedienungsanleitung

Ergotron

Ergotron DS100 Series Bedienungsanleitung

Ergotron

Ergotron Neo-Flex Series Bedienungsanleitung

Ergotron

Ergotron WorkFit-S Bedienungsanleitung

Ergotron

Ergotron WorkFit-P Bedienungsanleitung

Ergotron

Ergotron StyleView Bedienungsanleitung

Ergotron

Ergotron Grommet Mount Kit Bedienungsanleitung

Ergotron

Ergotron Neo-Flex Mobile Media Center LD Bedienungsanleitung

Ergotron

Ergotron WorkFit-S Bedienungsanleitung

Ergotron

Ergotron DS100 Series Abmessungen

Ergotron

Ergotron DS100 Series Bedienungsanleitung

Ergotron

Ergotron Neo Flex Bedienungsanleitung

Ergotron

Ergotron WorkFit-A, Single LCD Mount, LD Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung