Ergotron StyleView Bedienungsanleitung

1 of 23

888-45-208-W-02 rev. N • 10/19

English, Español, Français, Deutsch, Nederlands, Italiano, Svenska, 日本語, 汉语

StyleView Sit Stand Combo System

with Medium CPU Holder

For the latest User Installation Guide please visit: www.ergotron.com

2 of 23

888-45-208-W-02 rev. N • 10/19

10mm

11 mm

13 mm

17mm

7/16"

11mm 1/4"

> 3"

Ø 3/8" (10 mm) Ø 1/2" (12.8 mm)

Ø 7/32" (5.6 mm)

The Combo Arm can be modiﬁ ed to mount displays up to 25 lbs

(11.3 kg), however display lift and tilt motion will not be possible if

this option is chosen. Refer to special instructions on page 14.

Important! You will need to adjust this product after installation is complete. Make sure all your equipment is properly

installed on the product before attempting adjustments. This product should move smoothly and easily through the

full range of motion and stay where you set it. If movements are too easy or diﬃ cult or if product does not stay in

desired positions, follow the adjustment instructions to create smooth and easy movements. Depending on your

product and the adjustment, it may take many turns to notice a diﬀ erence. Any time equipment is added or removed

from this product, resulting in a change in the weight of the mounted load, you should repeat these adjustment steps

to ensure safe and optimum operation.

Tools Needed

Stud Finder

3 of 23

888-45-208-W-02 rev. N • 10/19

M4 x 10mm M4 x 10mm

M6 x 10mm

M6 x 70mm M4.2 x 25mm

1/4-20 x 2"

M8 x 16mm

M4 x 8mm M4 x 6mm

M10 x 12mm M10 x 16mm

M3.5 x 8mm

M5 x 15mm

3 mm

6mm

Components

Optional Weight Capacity Modiﬁ cation Fasteners

Flat Head Pan Head

4 of 23

888-45-208-W-02 rev. N • 10/19

This mounting height is a recommendation for an ergonomic workstation that accommodates user heights of 5’3”-5’9”

(160-175cm).

If user heights are diﬀ erent than this, you should change mounting height to accommodate user heights. (Change

mounting height one inch for every one inch diﬀ erence in user heights).

Mounting height assumes there is a 6” (152 mm)

distance between the center of your monitor

mounting holes and the top of the screen. If your

distance is smaller, you should increase mount-

ing height accordingly, if your distance is larger,

you should decrease your mounting height ac-

cordingly.

Top view showing range of motion when pulled out from the wall.

Front view with arm pushed back against the wall.

5 of 23

888-45-208-W-02 rev. N • 10/19

Ø 3/8" (10 mm) Ø 1/2"

1/4-20 x 2"

gauge steel

6 of 23

888-45-208-W-02 rev. N • 10/19

3-1/8"

(80 mm)

7 of 23

888-45-208-W-02 rev. N • 10/19

M6 x 70mm

8 of 23

888-45-208-W-02 rev. N • 10/19

gauge steel

9 of 23

888-45-208-W-02 rev. N • 10/19

1/4-20 x 2"

10 of 23

888-45-208-W-02 rev. N • 10/19

3mm

M6 x 10mm

M10 x 12mm

M6 x 10mm

M10 x 16mm

6mm

Andere Handbücher für StyleView

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ergotron Rack & Stand Handbücher

Ergotron

Ergotron 9" Vertical Lift Bedienungsanleitung

Ergotron

Ergotron WORKFIT Bedienungsanleitung

Ergotron

Ergotron Neo-Flex 45-174-300 Abmessungen

Ergotron

Ergotron Command Post Bedienungsanleitung

Ergotron

Ergotron LX Dual Side-by-Side Arm Bedienungsanleitung

Ergotron

Ergotron Workfit Single LD Bedienungsanleitung

Ergotron

Ergotron WorkFit Dual Hinge Bow Accessory Bedienungsanleitung

Ergotron

Ergotron TeachWell LCD Bedienungsanleitung

Ergotron

Ergotron Neo-Flex Bedienungsanleitung

Ergotron

Ergotron Neo-Flex Bedienungsanleitung

Ergotron

Ergotron LX Desk Mount LCD Arm Bedienungsanleitung

Ergotron

Ergotron Zido Bedienungsanleitung

Ergotron

Ergotron DS100 Series Bedienungsanleitung

Ergotron

Ergotron Neo-Flex 33-334-085 Abmessungen

Ergotron

Ergotron Neo-Flex Mobile MediaCenter VHD Bedienungsanleitung

Ergotron

Ergotron NF Bedienungsanleitung

Ergotron

Ergotron DS100 Series Bedienungsanleitung

Ergotron

Ergotron 888-33-332 Bedienungsanleitung

Ergotron

Ergotron WorkFit-A, Single LCD Mount, LD Bedienungsanleitung

Ergotron

Ergotron C-Clamp Under Mount Bedienungsanleitung

Ergotron

Ergotron SV10 Bedienungsanleitung

Ergotron

Ergotron 200 Series Bedienungsanleitung

Ergotron

Ergotron NeoFlex 18-931 Bedienungsanleitung

Ergotron

Ergotron WorkFit-B Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung