Ericsson MX8400 Bedienungsanleitung

MX8400 Multiplexe

Software Version 5.2.0 (and later)

REFERENCE GUIDE

2/1553-FGC 101 1014 Uen B

MX8400 Multiplexer

ENGLISH (UK) - READ THIS FIRST!

If you do not understand the contents of this manual. DO NOT OPERATE

THIS EQUIPMENT.Also, translation into any EC official language of this

manual can be made available, at your cost.

ITALIANO -LEGGERE QUESTO AVVISO PER PRIMO!

Se non si capisce il contenuto del presente manuale. NON UTILIZZARE

L’APPARECCHIATURA.. È anche disponibile la versione italiana di questo

manuale, ma il costo è a carico dell’utente.

NEDERLANDS -LEES DIT EERST!

Als u de inhoud van deze handleiding niet begrijpt. STEL DEZE

APPARATUUR DAN NIET IN WERKING. U kunt tevens, op eigen kosten,

een vertaling van deze handleiding krijgen.

SVENSKA - LÄS DETTA FÖRST!

Om Ni inte förstår informationen i denna handbok. ARBETA DÅ INTE MED

DENNA UTRUSTNING.En översättning till detta språk av denna handbok

kan också anskaffas, på Er bekostnad.

SUOMI - LUE ENNEN KÄYTTÖÄ!

Jos et ymmärrä käsikirjan sisältöä. ÄLÄ KÄYTÄ LAITETTA. Käsikirja

voidaan myös suomentaa asiakkaan kustannuksella.

PORTUGUÊS - LEIA O TEXTO ABAIXO ANTES DE MAIS NADA!

Se não compreende o texto deste manual. NÃO UTILIZE O

EQUIPAMENTO. O utilizador poderá também obter uma tradução do

manual para o português à própria custa.

DANSK - LÆS DETTE FØRST!

Udstyret må ikke betjenes. MEDMINDRE DE TIL FULDE FORSTÅR

INDHOLDET AF DENNE HÅNDBOG. Vi kan også for Deres regning levere

en dansk oversættelse af denne håndbog.

FRANÇAIS - AVANT TOUT, LISEZ CE QUI SUIT!

Si vous ne comprenez pas les instructions contenues dans ce manuel. NE

FAITES PAS FONCTIONNER CET APPAREIL. En outre, nous pouvons

vous proposer, à vos frais, une version française de ce manuel.

ΕΛΛΗΝΙΚΑ -ΔΙΑΒΑΣΤΕ ΠΡΩΤΑ ΑΥΤΟ!

Αν δεν καταλάβετε το περιεχόμενο αυτού του βοηθήματος/εγχειριδίου. ΜΗΝ

ΛΕΙΤΟΥΡΓΗΣΕΤΕ ΑΥΤΟΝ ΤΟΝ ΕΞΟΠΛΙΣΜΟ. Επίσης, αυτό το εγχειρίδιο

είναι διαθέσιμο σε μετάφραση σε αυτή τη γλώσσα και μπορείτε να το

αγοράσετε.

DEUTSCH - LESEN SIE ZUERST DIESEN HINWEIS!

Sollte Ihnen der Inhalf dieses Handbuches nicht klar verständlich sein,

dann. BEDIENEN SIE DIESE GERÄTE NICHT! Eine Übersetzung des

Handbuches in diese Sprache ist gegen Berechnung lieferbar.

ESPAÑOL - LEA ESTE AVISO PRIMERO!

Si no entiende el contenido de este manual. NO OPERE ESTE EQUIPO.

Podemos asimismo suministrarle una traducción de este manual al (idioma)

previo pago de una cantidad adicional que deberá abonar usted mismo.

Disclaimer

No part of this document may be reproduced in any form without the written permission of the

The contents of this document are subject to revision without notice due to continued progress in

methodology, design and manufacturing. Ericsson shall have no liability for any error or damage of

any kind resulting from the use of this document.

2/1553-FGC 101 1014 Uen B 2011-10-07

Contents

2/1553-FGC 101 1014 Uen B 2011-10-07

iii

Contents

Chapter 1: Introduction

This chapter identifies the equipment versions covered by this Reference Guide;

describes the purpose of the equipment in a typical system; provides a summary of

its main features; identifies the controls, indicators and connectors in a guided tour

of the front and rear panels; and lists the available options.

Chapter 2: Installing and Powering Up

This chapter provides a guide to the suitability of an installation; gives detailed

procedures for the preparation, installation and configuration of the equipment

including important safety information; provides pin-out details of the external

connectors; and details the power-up/-down procedures.

Chapter 3: Hardware Options and Software Licenses

This chapter describes the hardware options and software licenses.

Chapter 4: Operating the MX8400 Multiplexer using nCompass Control

This chapter describes how to set the IP address of the MX8400 Multiplexer to allow

it to connect to nCompass Control.

Chapter 5: Preventive Maintenance and Fault-Finding

This chapter details routine maintenance tasks to be performed; provides general

servicing advice, and information regarding warranty and maintenance; provides a

full list the error messages1that may occur, and any appropriate Operator action to

be taken; provides general fault-finding information for other types of problem which

may be encountered; and provides relevant disposal information.

Annex A: Glossary

Annex B: Technical Specification

Annex C: Static Parameters

Annex D: Conditional Access

Annex E: Redundancy Modes

Annex F: IP Protocol Stack

Annex G: ProMPEG FEC Support for IP Streaming

Annex H: Setting up the SFN Functionality

Annex I: PSIG Support

Annex J: BISS Support

1Please note that relevant extracts of this list appears in appropriate sections throughout this Reference Guide.

Preliminary Pages

Introduction

This Reference Guide provides instructions and information for the installation,

operation of the MX8400 Multiplexer.

This Reference Guide should be kept in a safe place for reference for the life of the

equipment. It is not intended that this Reference Guide will be amended by the issue

of individual pages. Any revision will be by a complete reissue. Further copies of this

Reference Guide can be ordered from the address listed in Page vi, Customer

Services. If passing the equipment to a third party, also pass the relevant

documentation.

Revision History

Issues of this Reference Guide are listed below:

Issue Date Software

Version

Comments

1 Feb 2009 2.0.0 RJ-45 Ethernet Option Card with PRO MPEG FEC

added.

2 Nov 2009 3.0.0 SFN functionality added and associated GPS

Interface card supported.

Missing PID Monitoring supported. DVB PSIG

interface supported.

Various other improvements to the specification and

functionality.

References to nCC revised and updated.

3 Dec 2010 5.0.0 Program Level Redundancy functionality added.

Streaming EMMs to Multiple Output Transport

Streams

Under nCC, now allows remultiplexing of transport

streams without reading or processing PCR

information

Carriage of ECMs for Services in the Clear

Rear panel indicators now show status of ASI inputs

and outputs.

A Jan 2011 5.0.0 Allocation of Ericsson Number Identity and Rebrand

completed.

BNov 2011 5.2.0 Inclusion of Dual PSU and BISS Modes 1 and 2.

2/1553-FGC 101 1014 Uen B 2011-10-07

Preliminary Pages

Associated Documents

The following manuals/guides are also associated with this equipment:

Ericsson Part Number Original Part No, Title

1/1553-FGC 101 1014 Uen B ST.US.E10246 MX8400 Multiplexer (Sv 5.2.0> User

Guide

Trademarks

All best endeavors have been made to acknowledge registered trademarks and

trademarks used throughout this Reference Guide. Any notified omissions will be

rectified in the next issue of this Reference Guide. Some trademarks may be

registered in some jurisdictions but not in others.

Registered trademarks and trademarks used are acknowledged below and marked

with their respective symbols. However, they are not marked within the text of this

Reference Guide.

Registered Trademarks

Ethernet®Registered trademark of Xerox Corporation.

Microsoft®Registered trademark of Microsoft Corporation.

Windows®Registered trademark of Microsoft Corporation.

ISIS 8000®UK registered trademark of Ericsson AB.

Reflex® Registered trademark of Ericsson AB.

2/1553-FGC 101 1014 Uen B 2011-10-07

Preliminary Pages

Warnings, Cautions and Notes

Heed Warnings

All warnings on the product and in the operating instructions should be adhered to.

The manufacturer can not be held responsible for injuries or damage where

warnings and cautions have been ignored or taken lightly.

Read Instructions

All the safety and operating instructions should be read before this product is

operated.

Follow Instructions

All operating and use instructions should be followed.

Retain Instructions

The safety and operating instructions should be retained for future reference.

Warning!

Warnings give information which, if strictly observed, will prevent personal injury or

death, or damage to property or the environment. They are highlighted for

emphasis, as in this example, and are placed immediately preceding the point at

which the reader requires them.

Caution!

Cautions give information which, if strictly followed, will prevent damage to

equipment or other goods. They are highlighted for emphasis, as in this example,

and are placed immediately preceding the point at which the reader requires them.

Note: Notes provide supplementary information. They are highlighted for

emphasis, as in this example, and are placed immediately after the relevant

text.

EMC Compliance

This equipment is certified to the EMC requirements detailed in Annex B, Technical

Specification. To maintain this certification, only use the leads supplied or if in doubt

contact Customer Services.

2/1553-FGC 101 1014 Uen B 2011-10-07

Preliminary Pages

Contact Information

Support Services

Our primary objective is to provide first class customer care that is tailored to your

specific business and operational requirements. All levels are supported by one or

more service performance reviews to ensure the perfect partnership between

Ericsson and your business.

Warranty

All Ericsson products and systems are designed and built to the highest standards

and are covered under a comprehensive 12 month warranty.

Levels of Continuing Ericsson Service Support

For systems support you can choose either Gold Business Critical support or

Silver Business Advantage. These packages are designed to save you costs and

protect your income through enlisting the help of Ericsson support specialists.

Call Ericsson Sales for more details.

Customer Services

Europe, Middle East

and Africa

Tel: +44 (0) 23 8048 4455

Fax: +44 (0) 23 8048 4467

Email: tvsupportemea@ericsson.com

Americas Tel: +888 671 1268

Tel: +678 812 6255

Fax: +678 812 6262

Email: tvsupportam[email protected]

Email: [email protected]

US and Canada

International

Compression

Software Support Centre

China Tel: +86 10 8476 8676

Fax: +86 10 8476 7741

Tel: +852 2590 2388

Fax: +852 2590 9550

Email: [email protected]

Beijing

Hong Kong

Australia and New

Zealand

Tel: +612 (0) 9111 4027

Fax: +612 (0) 9111 4949

Email: [email protected]m

Internet Address www.ericsson.com

2/1553-FGC 101 1014 Uen B 2011-10-07

vii

Preliminary Pages

2/1553-FGC 101 1014 Uen B 2011-10-07

viii

Technical Training

Ericsson provides a wide range of training courses on the operation and

maintenance of our products and on their supporting technologies. Ericsson can

provide both regularly scheduled courses and training tailored to individual needs.

Courses can be run either at your premises or at one of our dedicated training

facilities.

International Tel: +44 (0) 23 8048 4229

Fax: +44 (0) 23 8048 4161

Email: tvglobaltraining@ericsson.com

Customer Services and Technical Training Postal Address

Ericsson

Unit 2

Strategic Park

Comines Way

Hedge End

Southampton

Hampshire

SO30 4DA

United Kingdom

Return of Equipment

If you need to return equipment for repair please contact your local Ericsson

Customer Services Department.

Please refer to the Customer Services Contact Information on Page vii

You will then be directed to return the faulty equipment to a repair centre with

the appropriate facilities for that equipment. A tracking number will be issued that

should be used if you need to enquire about the progress of the repair. The

equipment should be properly packed and the tracking number should be clearly

marked on the outside of the packaging.

Technical Publications

If you need to contact Ericsson Technical Publications regarding this publication,

e-mail: [email protected].

1 Introduction

Chapter 1

Contents

1.1 Terminology..........................................................................................1-3

1.2 Scope of this Guide ..............................................................................1-3

1.2.1 Who Should Use this Guide .................................................................1-3

1.2.2 What this Guide Describes ...................................................................1-3

1.2.2.1 Identifying the Equipment .....................................................................1-3

1.2.2.2 Product Codes...................................................................................... 1-4

1.2.3 Equipment Information Label................................................................ 1-5

1.2.3.1 Contents of Label .................................................................................1-5

1.2.3.2 Firmware/Software Versions ................................................................ 1-5

1.3 Summary of Features ........................................................................... 1-6

1.3.1 Overview............................................................................................... 1-6

1.3.2 Main Features....................................................................................... 1-6

1.3.2.1 Program Specific Information Generator (PSIG) ..................................1-7

1.3.2.2 Program Clock Reference (PCR) .........................................................1-7

1.3.2.3 Frequency Synchronization .................................................................. 1-8

1.3.2.4 Table Generation.................................................................................. 1-8

1.3.2.5 TS IP Summary of Features ................................................................. 1-8

1.3.2.6 ASI Input/Output Summary of Features ...............................................1-8

1.3.2.7 Dual PSU..............................................................................................1-9

1.3.3 Remote Reflex......................................................................................1-9

1.3.3.1 Statistical Multiplexing ..........................................................................1-9

1.3.3.2 Remote Statistical Multiplexing............................................................. 1-9

1.3.3.3 Reflex Operation...................................................................................1-9

1.3.3.4 Reflex Static Parameters.................................................................... 1-10

1.3.4 Conditional Access ............................................................................. 1-11

1.3.4.1 DVB CA (Option) ................................................................................1-11

1.3.4.2 BISS ................................................................................................... 1-11

1.3.5 Single Frequency Networks Functionality...........................................1-11

1.3.6 Extended Functionality .......................................................................1-11

1.4 Role of the MX8400 Multiplexer .........................................................1-12

1.4.1 The MX8400 Multiplexer as an iSIS 8000 Solution Component.........1-12

1.4.2 MX8400 Multiplexer Control Using nCompass................................... 1-12

1.5 Guided Tour........................................................................................1-12

1.5.1 Construction .......................................................................................1-12

1.5.2 Indicators ............................................................................................ 1-13

1.5.2.1 Front Panel Indicators ........................................................................1-13

1.5.2.2 Rear Panel Connectors ......................................................................1-13

2/1553-FGC 101 1014 Uen B

1-1

Introduction

2/1553-FGC 101 1014 Uen B

1-2

1.5.2.3 Rear Panel Indicators......................................................................... 1-14

List of Figures

Figure 1.1 Front View of the MX8400 Multiplexer [Dual PSU]............................... 1-4

Figure 1.2 Current Label (Affixed to the side of the unit) ....................................... 1-5

Figure 1.3 Current Label (Affixed to the rear of the unit) ....................................... 1-5

Figure 1.4 The Role of the MX8400 Multiplexer in a Cable Distribution System . 1-12

Figure 1.5 Front Panel Indicators ........................................................................ 1-13

Figure 1.6 Typical Rear View of the MX8400 Multiplexer.................................... 1-13

Figure 1.7 Rear Panel Indicators ......................................................................... 1-14

List of Tables

Table 1.1 Model Number Descriptions .................................................................. 1-4

Table 1.2 Software License Key Descriptions ....................................................... 1-4

Table 1.3 Static Parameters [Reflex] ................................................................... 1-10

Inhaltsverzeichnis

Andere Ericsson Multiplexer Handbücher

Ericsson

Ericsson AXX 9100 CONNECT Bedienungsanleitung

Beliebte Multiplexer Handbücher anderer Marken

Campbell

Campbell AM416 Bedienungsanleitung

Paradyne

Paradyne SIM2000 Bedienungsanleitung

Panasonic

Panasonic WJFS616 - SWITCHER Bedienungsanleitung

Lanex

Lanex TM-77 Bedienungsanleitung

Bosch

Bosch VSS8394/01T Bedienungsanleitung

Quark-Elec

Quark-Elec QK-A035 Bedienungsanleitung

ADTRAN

ADTRAN Frameport 768 Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems E247 Bedienungsanleitung

Paradyne

Paradyne Hotwire 8786 Bedienungsanleitung

RFL Electronics

RFL Electronics 9508D UCC Bedienungsanleitung

Miranda

Miranda AMX-101i Bedienungsanleitung

ShipModul

ShipModul MiniPlex-AIX NMEA-0183 Bedienungsanleitung

GE StoreSafe SDVR-10 Bedienungsanleitung

Pickering

Pickering 40-613 Bedienungsanleitung

Pickering

Pickering 40-667C Bedienungsanleitung

American Fibertek

American Fibertek MTX-8410C Bedienungsanleitung

ADC

ADC HiGain ELU-319 5E Bedienungsanleitung

Paradyne

Paradyne Hotwire 8774 Bedienungsanleitung