Ericsson M-PATM SERIES LBI-38377E Bedienungsanleitung

LBI-38377E

Operator’s Manual

M-PASERIES

PORTABLE RADIO

NOTICE!

This manual covers Ericsson and General Electric

products manufactured and sold by Ericsson Inc.

The software contained in this device is copyrighted by Ericsson Inc.

UnpublishedrightsarereservedunderthecopyrightlawsoftheUnited

States.

NOTICE!

This manual is published by Ericsson Inc., without any warranty.

Improvements and changes to this manual necessitated by typographical

errors, inaccuracies of current information, or improvements to programs

and/orequipment, may be made by EricssonInc.,atany timeand without

notice. Such changes will be incorporated into new editions of this

manual. No part of this manual may be reproduced or transmitted in any

form or by any means, electronic or mechanical, including photocopying

and recording, for any purpose, without the express written permission of

Ericsson Inc.

TABLE OF CONTENTS (CONT.)

OPERATINGTIPS . . . . . . . . . . . . . 27

OPERATING RULES AND

REGULATIONS . . . . . . . . . . . . . . . 27

BATTERY PACKS . . . . . . . . . . . . . . 28

INSTALLINGTHEBATTERYPACK . . . 28

REMOVING THE BATTERY PACK . . . 29

CHARGINGTHEBATTERYPACKS . . 29

RECHARGEABLE BATTERY PACK

DISPOSAL . . . . . . . . . . . . . . . 30

SWIVEL MOUNT REMOVAL AND

REPLACEMENT . . . . . . . . . . . . . . 30

INTRINSICALLY SAFE USAGE . . . . . . . 31

WARRANTY . . . . . . . . . . . . . . . . 33

NICKEL-CADMIUM BATTERY

WARRANTY . . . . . . . . . . . . . . . . 34

TABLE OF CONTENTS

INTRODUCTION . . . . . . . . . . . . . . 5

CONTROLS . . . . . . . . . . . . . . . . . 5

INDICATORS . . . . . . . . . . . . . . . . 13

UNIVERSAL DEVICE CONNECTOR . . . . 14

ALERTTONES . . . . . . . . . . . . . . . 15

OPERATION . . . . . . . . . . . . . . . . 15

POWER-UP . . . . . . . . . . . . . . . 15

MODE/CHANNEL/CG SELECTION . . 16

RECEIVING AMESSAGE . . . . . . . 17

TRANSMITTING A MESSAGE . . . . . 18

EMERGENCY OPERATION . . . . . . 18

SCANNING CHANNELS . . . . . . . . 19

TELEPHONE INTERCONNECT

CALLS . . . . . . . . . . . . . . . . . 22

"KEY LOCK" MENU . . . . . . . . . . 24

"ALERT" MENU . . . . . . . . . . . . . 25

PROGRAMMABLE FEATURES . . . . . . 25

PRODUCT SPECIFICATION FOR

CE MARKED EQUIPMENT

The M-PA Portable conforms to the following

Product Specifications.

EUROPEAN STANDARDS:

Safety: Not Applicable

EMC: prETS 300 279 (August 1995)

TTD: Not Applicable

SUPPLEMENTARY INFORMATION:

At this time, the M-PA portable radio may not be

operatedwhileinavehicularchargerintheEuropean

Community since it has not been evaluated for op-

eration in this mode.

This M-PA portable radio may be used in both

trunked and conventional applications.

INTRODUCTION

This manual describes the operation of the

M-PA



two-wayFMSelect,Scan,andSystemmodel

portable radios.

Operating controls on the radio include a ro-

tatable control knob, rotatable volume control, a 4-

button keypad (Scan model) or 16-button keypad

(Systemmodel), push-to-talk, emergency and moni-

tor buttons. The on/off power switch for the unit is

located on the removable battery pack.

The 8-digit alphanumeric liquid crystal display

(LCD)onthefrontoftheradiodisplaystheoperating

status of the radio. This backlit display also has

status flags for indicating the various operating con-

ditions such as transmitter on, scanning, or emer-

gency mode enabled.

The exact operation of your radio will vary de-

pending upon the mode of operation, the radio’s

programming, andthe particular radiosystem. Con-

sult your radio system’s representative for particular

features that are programmed into your radio.

CONTROLS

ON/OFF SWITCH

The ON/OFF SWITCH is located on the battery

pack. Sliding this switch up will supply power to the

radio from the battery pack. An audible click will be

heardandthe "ON" indicatorwillbe exposed. When

the radio is turned on, it willperform a power-up self

test and then resume operation on the previous

operating channel as displayed in the LCD. Sliding

the switch down will turn the radio off.

VOLUME CONTROL KNOB

The VOLUME CONTROL KNOB is a rotatable

control on the top of the radio used to adjust the

receiver’s audio level in the speaker. Rotating this

knob in a clockwise direction will increase the audio

level. Counter-clockwise rotation will decrease the

audiolevel. Minimumlevelsmaybeprogrammedinto

the radio to prevent missed calls due to too low of a

volume setting.

CONTROL KNOB

The rotatable 16-position CONTROL KNOB lo-

catedonthetopoftheradioisprogrammedtoselect

the operating channel, mode, or specific Channel

Guard encode/decode tones. See MODE/CHAN-

NEL/CG SELECTION for details. A stop plate may

be installed under the knob to limit the maximum

number of positions to less than sixteen (16). It is

normally factory installed for fifteen (15) positions.

Some radios may be programmed with this knob

disabled.

PTT BUTTON

Pressing the PTT BUTTON on the side of the

radio will enable the radio’s transmitter. The "TX"

status flag in the display will turn on when the radio

is transmitting. Releasing the PTT BUTTON will re-

turn operation to receive mode.

MONITOR BUTTON

The MONITOR BUTTON is used to unsquelch

the receiver. Momentarily pressing this button will

disable squelch and the receiver noise will be heard

in the speaker.

Ifprogrammedenabledfortheselectedchannel,

ChannelGuard(CG)and/orType99(T99)signalling

will be enabled when the channel is selected. If CG

and/or T99 are enabled, the appropriate status flag

"CG" and/or "T99" willturn on. TheMONITOR BUT-

TON may then be used to toggle CG and/or T99

betweendisabledandenabledbypressingandhold-

ing it for at least one (1) second; the appropriate

status flag will toggleon oroff. The MONITOR BUT-

TON is also used to reset T99 operation after a call

is received.

EMERGENCY BUTTON

The EMERGENCY BUTTON is the small red

button located on top of the radio near the antenna.

If this button is programmed for emergency opera-

tion,pressingit foratleast one(1)secondwillcause

theradiototransmitGE-STARemergencysignalling.

The "EMG" status flag will turn on. GE-STAR is

transmittedaccording to one ofseveraldifferent pro-

grammable methods. See EMERGENCY OPERA-

TION for details.

Thisbuttonmayalsobeprogrammedasanhome

modebutton. Ifprogrammedinthismanner,pressing

it will switch operation to the programmed home

mode.

Figure 1 - M-PA Personal Radio Figure 2 - M-PA Radio (Top View) 7

SIDE VIEW FRONT VIEW

Figure 3 -M-PAScan Model Radio

MENU BUTTON (Scan Model)

Pressing the MENU button causes the radio to

scroll through up to six (6) different menus pro-

grammed into the radio. After the desired menu is

displayed, the feature within the menu is selected

with the SEL button. The menus that may be pro-

grammed are:

Menu Display Function Or Use

"CHANNEL" TheMENUandSELbuttonsare

programmed for channel selec-

tion. Whenthisdisplayappears,

select the desired channel with

the SEL button and then press

EXIT.

"MODE" TheMENUandSELbuttonsare

programmedformodeselection.

When this display appears, se-

lect the desired mode by press-

ing the SEL button and then

press EXIT.

"PHONE" Allowsselectionofone(1)ofthe

ten(10)programmed telephone

numbers for automatic dialling.

"KEY LOCK" Allows the keypad buttons to be

locked or unlocked.

"SCAN A/D" Allows channels to be added to

or deleted from the scan list for

the current mode. The priority-

onechannelandthepriority-two

channel are also set within this

menu.

"ALERT" Allows the alert tones to be dis-

abled or enabled.

SELECT BUTTON

Selecting different features within each menuis

accomplished with the SEL button. First, the menu

mode must be enabled and the desired menu must

be chosen by pressing and releasing the MENU

button until the desired menu appears in the display.

Figure 4 - M-PA Scan Model Keypad

Afterthemenuischosen,thedesiredfunctionor

feature is selected by pressing the SEL button. For

example,todisablethealerttones,pressMENUuntil

"ALERT" is displayed then press SELto select "DIS-

ABLED".Next press the EXIT button.

EXIT BUTTON

Pressing the EXIT button will cause the radio to

exitthecurrentmenudisplayandreturn operationto

the channel currently selected. If the menu mode is

notenabledwhenthebuttonispressed,pressingthis

button will turn the display and keypad backlighting

on for thirty (30) seconds if the backlight is pro-

grammed on.

SCAN BUTTON

Pressing the SCAN button on the keypad will

toggle scan operation on and off. When the radio is

scanning, the "SCN" status flag in the display will

show and all channels on the scan list will be

scanned. See SCANNING CHANNELS for addi-

tional details.

MENU BUTTON (System Model)

Pressing the MENU button causes the radio to

scroll through up to seven (7) different menus pro-

grammed into the radio. After the desired menu is

displayed, the feature within the menu is selected

with the SEL button. The menus that may be pro-

grammed are:

Menu Display Function Or Use

"CHANNEL" TheMENUandSELbuttonsare

programmed for channel selec-

tion. When this displayappears,

select the desired channel with

the SEL button and then press

EXIT.

"MODE" TheMENUandSELbuttonsare

programmedformodeselection.

When this display appears, se-

lect the desired mode by press-

ing the SEL button and then

press EXIT.

"PHONE" Allows selection of one(1) ofthe

ten(10)programmedoruseren-

tered telephone numbers for

automatic dialling.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ericsson Tragbares Radio Handbücher

Ericsson

Ericsson KPC-300 Bedienungsanleitung

Ericsson

Ericsson LBI-38795B Bedienungsanleitung

Ericsson

Ericsson KPC-300 Bedienungsanleitung

Ericsson

Ericsson TMX-8825 Bedienungsanleitung

Ericsson

Ericsson RRUS 13 Bedienungsanleitung

Ericsson

Ericsson LBI-38732D Bedienungsanleitung

Ericsson

Ericsson AEGIS M-PA Bedienungsanleitung

Ericsson

Ericsson EDACS DPE-100 Bedienungsanleitung

Ericsson

Ericsson LBI-38823D Bedienungsanleitung

Ericsson

Ericsson PCS Bedienungsanleitung

Ericsson

Ericsson LBI-38823C Bedienungsanleitung

Ericsson

Ericsson EDACS IPE SERIES Bedienungsanleitung

Ericsson

Ericsson EDACS M-PA 806-870 MHz Bedienungsanleitung

Ericsson

Ericsson M-PA EDACS Bedienungsanleitung

Ericsson

Ericsson KPC-300 Betriebsanleitung

Ericsson

Ericsson LBI-38836A Bedienungsanleitung

Ericsson

Ericsson AEGIS FDMRTS M-PA NARROWBAND 9600 Bedienungsanleitung

Ericsson

Ericsson MDR GE-MARC Bedienungsanleitung

Ericsson

Ericsson Voice Guard M-Pa SCAN Bedienungsanleitung

Ericsson

Ericsson M-PA LBI-38378D Bedienungsanleitung

Ericsson

Ericsson LBI-38732E Bedienungsanleitung

Ericsson

Ericsson PCS Bedienungsanleitung

Ericsson

Ericsson DELTA-S Bedienungsanleitung

Ericsson

Ericsson PORTABLE FM RADIO Bedienungsanleitung

Beliebte Tragbares Radio Handbücher anderer Marken

Telefunken

Telefunken P5 Bedienungsanleitung

Tait

Tait TP9300 Bedienungsanleitung

Lafayette

Lafayette Guardian 5500 Bedienungsanleitung

Sailor

Sailor SP3300 Bedienungsanleitung

Matra Nortel

Matra Nortel MC 6500 Bedienungsanleitung

Hytera

Hytera PD362i Bedienungsanleitung

Vertex Standard

Vertex Standard VX-P920 Series Bedienungsanleitung

Roberts

Roberts Ecologic 3 Bedienungsanleitung

LENCO

LENCO IPD-5100 Bedienungsanleitung

Baofeng

Baofeng BF-82 Bedienungsanleitung

Trevi

Trevi RA 764 Bedienungsanleitung

M/A-Com

M/A-Com P5100 Series Bedienungsanleitung

Elta

Elta 6699 Bedienungsanleitung

PURE

PURE ONE classic Series II Bedienungsanleitung

Teac

Teac PR130 Bedienungsanleitung

Philips

Philips AE6370 Bedienungsanleitung

Simoco

Simoco SRP9170 Bedienungsanleitung

Audiovox

Audiovox FR14 Bedienungsanleitung