ESAB Aristo 1000 AC/DC SAW Bedienungsanleitung

Valid for serial no. 145-xxx-xxxx, 221-xxx-xxxx0462 985 001 GB 20120605

Aristo 1000

AC/DC SAW

Instruction manual

- 2 -

- 3 -

TOCe

Rights reserved to alter specifications without notice.

1 SAFETY 4...........................................................

2 INTRODUCTION 6...................................................

3 TECHNICAL DATA 6.................................................

4 INSTALLATION 7....................................................

4.1 Lifting instructions 8.........................................................

4.2 Location 8..................................................................

4.3 Example of welding equipment 9..............................................

4.4 Cable routing 10.............................................................

4.5 Mains power supply 11........................................................

5 OPERATION 12.......................................................

5.1 Connections and control devices 12............................................

5.2 Connection of welding and return cable 13.......................................

5.3 Key to symbols 13............................................................

5.4 Overheating protection 13.....................................................

6 MAINTENANCE 14....................................................

6.1 Welding power source 14......................................................

7 FAULT-TRACING 16..................................................

8 ORDERING SPARE PARTS 16.........................................

DIAGRAM 22............................................................

ASSEMBLY INSTRUCTIONS 23...........................................

CONNECTION INSTRUCTION 24..........................................

ORDER NUMBER 25.....................................................

SPARE PARTS LIST 26..................................................

ACCESSORIES 27.......................................................

- 4 -

bb01de

1 SAFETY

Users of ESAB welding equipment have the ultimate responsibility for ensuring that anyone who works on or near the equipment

observes all the relevant safety precautions. Safety precautions must meet the requirements that apply to this type of welding

equipment. The following recommendations should be observed in addition to the standard regulations that apply to the work

place.

All work must be carried out by trained personnel well-acquainted with the operation of the welding equipment. Incorrect oper

ation of the equipment may lead to hazardous situations which can result in injury to the operator and damage to the equipment.

1. Anyone who uses the welding equipment must be familiar with:

Sits operation

Slocation of emergency stops

Sits function

Srelevant safety precautions

Swelding

2. The operator must ensure that:

Sno unauthorized person is stationed within the working area of the equipment when it is started up.

Sno-one is unprotected when the arc is struck

3. The workplace must:

Sbe suitable for the purpose

Sbe free from drafts

4. Personal safety equipment

SAlways wear recommended personal safety equipment, such as safety glasses, flame-proof clothing, safety gloves.

SDo not wear loose-fitting items, such as scarves, bracelets, rings, etc., which could become trapped or cause burns.

5. General precautions

SMake sure the return cable is connected securely.

SWork on high voltage equipment may only be carried out by a qualified electrician.

SAppropriate fire extinquishing equipment must be clearly marked and close at hand.

WARNING

Do not use the power source for thawing frozen pipes.

- 5 -

bb01de

WARNING

Read and understand the instruction manual before installing or operating.

Arc welding and cutting can be injurious to yourself and others. Take precautions when welding and

cutting. Ask for your employer's safety practices which should be based on manufacturers' hazard

data.

ELECTRIC SHOCK - Can kill

SInstall and earth the unit in accordance with applicable standards.

SDo not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.

SInsulate yourself from earth and the workpiece.

SEnsure your working stance is safe.

FUMES AND GASES - Can be dangerous to health

SKeep your head out of the fumes.

SUse ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone

and the general area.

ARC RAYS - Can injure eyes and burn skin.

SProtect your eyes and body. Use the correct welding screen and filter lens and wear protective

clothing.

SProtect bystanders with suitable screens or curtains.

FIRE HAZARD

SSparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.

NOISE - Excessive noise can damage hearing

SProtect your ears. Use earmuffs or other hearing protection.

SWarn bystanders of the risk.

MALFUNCTION - Call for expert assistance in the event of malfunction.

PROTECT YOURSELF AND OTHERS!

CAUTION

Read and understand the instruction manual before

installing or operating.

CAUTION

This product is solely intended for arc welding.

CAUTION

Class A equipment is not intended for use in residential locations where

the electrical power is provided by the public low-voltage supply system.

There may be potential difficulties in ensuring electromagnetic

compatibility of class A equipment in those locations, due to conducted

as well as radiated disturbances.

ESAB can provide you with all necessary welding protection and accessories.

- 6 -

bb01de

Dispose of electronic equipment at the recycling facility!

In observance of European Directive 2002/96/EC on Waste Electrical and Electronic

Equipment and its implementation in accordance with national law, electrical and/or

electronic equipment that has reached the end of its life must be disposed of at a

recycling facility.

As the person responsible for the equipment, it is your responsibility to obtain

information on approved collection stations.

For further information contact the nearest ESAB dealer.

2 INTRODUCTION

Aristo 1000 is a welding power source intended for high productivity submerged arc

welding with direct current (DC) or alternating current (AC). The power source has

many setting options for those who want to optimise their welding process.

The welding power source is used together with control unit PEK and the welding

process parameters are regulated via it.

The power source is part of ESAB's A2 / A6 system, which means that most of the

components from this system can be used with Aristo 1000.

Components such as:

SWelding tractors

SColumn and boom

SWelding heads

SPositioning equipment

SJoint tracking equipment

SFlux handling systems.

ESAB's accessories for the product can be found on page 27.

3 TECHNICAL DATA

Aristo 1000

Mains voltage 380 - 575 V, $10%, 3∼50/60 Hz

Mains supply Ssc min 6.7 MVA

Primary current Imax 86 A

Setting range 14 - 50 V / 0 - 1000 A

Permissible load

100% duty cycle 1000 A / 44 V

Power factor at maximum current 0,93

Efficiency at maximum current 85 %

Open-circuit voltage with VRD U0max 121 VDC

Apparent power at maximum current 58,1 kVA

Active power at maximum current 52,0 kW

No-load power 200 W

- 7 -

bb01de

Aristo 1000

Operating temperature -10 to +40°C

Transportation temperature -20 to +55°C

Dimensions lxwxh 865 x 610 x 1320 mm

Weight 330 kg

Insulation class H

Enclosure class IP 23S

Application class

Duty cycle

The duty cycle refers to the time as a percentage of a ten-minute period that you can weld or cut at

a certain load without overloading. The duty cycle is valid for 40°C.

Enclosure class

The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid

objects or water. Equipment marked IP 23S is designed for indoor and outdoor use; however, should

not be operated in precipitation.

Application class

The symbol indicates that the power source is designed for use in areas with increased

electrical hazard.

Mains supply, Ssc min

Minimum short circuit power on the network in accordance with IEC 61000-3-12

4 INSTALLATION

The installation must be carried out by a professional.

The power source must be calibrated by a professional.

CAUTION!

Installation shall be made to a symmetrical 3 phase system in respect to safety ground.

Intended for fixed installation.

Note

Mains supply requirements

High power equipment may, due to the primary current drawn from the mains supply, influence the

power quality of the grid. Therefore connection restrictions or requirements regarding the

maximum permissible mains impedance or the required minimum supply capacity at the interface

point to the public grid may apply for some types of equipment (see technical data). In this case it

is the responsibility of the installer or user of the equipment to ensure, by consultation with the

distribution network operator if necessary, that the equipment may be connected.

Note

The power source can be connected for generator power. For more information, contact

authorised ESAB service personnel.

- 8 -

bb01de

4.1 Lifting instructions

4.2 Location

WARNING

Secure the equipment - particularly if the

ground is uneven or sloping.

Position the welding power source so that

its cooling air inlets and outlets are not

obstructed, with a distance of at least 250 mm

all the way around.

When installing the power source on the

floor, see the dimensions according to the

hole pattern on page 23.

- 9 -

bb01de

4.3 Example of welding equipment

1Welding head 5Return cable 9Measurement cable,

speed

2Control unit 6Measurement cable,

workpiece

10 Motor cable

3Control cable 7Workpiece 11 Measurement cable,

welding voltage

4Welding power source 8Welding cable

- 10 -

bb01de

4.4 Cable routing

3Control cable 5Return cable 6Measurement

cable, workpiece

8Welding cable

For more information regarding cable routing, see page 17 and onwards.

Inhaltsverzeichnis

Andere ESAB Schweißsystem Handbücher

ESAB

ESAB Warrior Feed 304 Bedienungsanleitung

ESAB

ESAB LAF 1000 Bedienungsanleitung

ESAB

ESAB EAS IV Bedienungsanleitung

ESAB

ESAB ES 150i Bedienungsanleitung

ESAB

ESAB Caddy Tig 1500i Bedienungsanleitung

ESAB

ESAB EPP-360 Bedienungsanleitung

ESAB

ESAB A6 Mastertrac Tandem Bedienungsanleitung

ESAB

ESAB Origo Mig C420 PRO Bedienungsanleitung

ESAB

ESAB AristoFeed 30 Bedienungsanleitung

ESAB

ESAB PT-19A Bedienungsanleitung

ESAB

ESAB PKB 250 Bedienungsanleitung

ESAB

ESAB Fabricator ET 410iP Bedienungsanleitung

ESAB

ESAB Warrior 750i CC/CV Bedienungsanleitung

ESAB

ESAB ARC 601i Bedienungsanleitung

ESAB

ESAB A2SF J1 Bedienungsanleitung

ESAB

ESAB PT-31XL Bedienungsanleitung

ESAB

ESAB Caddy Tig 1500i VRD Bedienungsanleitung

ESAB

ESAB Powercut 875 Bedienungsanleitung

ESAB

ESAB Rogue EM 180 Bedienungsanleitung

ESAB

ESAB Origo Arc 250 Bedienungsanleitung

ESAB

ESAB ARC300i Bedienungsanleitung

ESAB

ESAB Aristo Mig 3001i Bedienungsanleitung

ESAB

ESAB PCM-1125 Bedienungsanleitung

ESAB

ESAB ESP-150 Bedienungsanleitung

Beliebte Schweißsystem Handbücher anderer Marken

Berner

Berner PLASMACUT 54 Bedienungsanleitung

Pro Spot

Pro Spot PR-155 Bedienungsanleitung

Forney

Forney 210 Bedienungsanleitung

Thermal Arc

Thermal Arc 400S Bedienungsanleitung

Lincoln Electric

Lincoln Electric HANDYMIG 170I Bedienungsanleitung

GYS

GYS PROTIG 201 AC/DC Bedienungsanleitung

TAFA

TAFA 30*8B35 Bedienungsanleitung

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Bedienungsanleitung

CIGWELD

CIGWELD 636804 Kurzanleitung

Red-D-Arc

Red-D-Arc DC-400 Bedienungsanleitung

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Bedienungsanleitung

Elettro

Elettro HI-MIG 3000 SYNERGIC Bedienungsanleitung

Sonics

Sonics H520T Bedienungsanleitung

Miller

Miller Big Blue 400D Bedienungsanleitung

NewArc

NewArc RT2000 Kurzanleitung

Hypertherm

Hypertherm powermax1000 Bedienungsanleitung

Lincoln Electric

Lincoln Electric POWER WAVE I400 Bedienungsanleitung

Everlast

Everlast POWER MTS 221STi Bedienungsanleitung