ESAB Cutmaster 120 Bedienungsanleitung

120

Art # A-12769_AB

208/230V

400V 460V

Revision: AB Issue Date: April 15, 2015 Manual No.: 0-5380

ESAB Cutmaster®120

PLASMA CUTTING SYSTEM

SL100 1Torch™

Operating

Manual

esab.com.br

WE APPRECIATE YOUR BUSINESS!

Congratulations on your new ESAB product. We are proud to have you as our customer and will strive to

provide you with the best service and reliability in the industry. This product is backed by our extensive

warranty and world-wide service network. To locate your nearest distributor or service agency, visit us on

the web at www.esab.com.br.

This Operating Manual has been designed to instruct you on the correct use and operation of your ESAB

product. Your satisfaction with this product and its safe operation is our ultimate concern. Therefore please

take the time to read the entire manual, especially the Safety Precautions.They will help you to avoid potential

hazards that may exist when working with this product.

YOU ARE IN GOOD COMPANY!

The Brand of Choice for Contractors and Fabricators Worldwide.

ESAB is a Global Brand of manual and automation Plasma Cutting Products.

We distinguish ourselves from our competition through market-leading, dependable products that have stood

the test of time. We pride ourselves on technical innovation, competitive prices, excellent delivery, superior

customer service and technical support, together with excellence in sales and marketing expertise.

Above all, we are committed to developing technologically advanced products to achieve a safer working

environment within the welding industry.

WARNING

Read and understand this entire Manual and your employer’s safety practices before install-

ing, operating, or servicing the equipment.

While the information contained in this Manual represents the Manufacturer's best judgement,

the Manufacturer assumes no liability for its use.

Plasma Cutting Power Supply

ESAB Cutmaster®120 with SL100 1Torch™

Operating Manual Number 0-5380

Published by:

ESAB

2800 Airport Rd.

Denton, TX 76208

www.esab.com.br

Reproduction of this work, in whole or in part, without written permission of the pub-

lisher is prohibited.

The publisher does not assume and hereby disclaims any liability to any party for any

loss or damage caused by any error or omission in this Manual, whether such error

results from negligence, accident, or any other cause.

Original Publication Date: April 15, 2015

Revision Date: April 15, 2015

Record the following information for Warranty purposes:

Where Purchased:_______________________________ ________________

Purchase Date:__________________________________ ________________

Power Supply Serial #:___________________________ ________________

Torch Serial #:___________________________________________________

Be sure this information reaches the operator.

You can get extra copies through your supplier.

CAUTION

These INSTRUCTIONS are for experienced operators. If you are not fully familiar

with the principles of operation and safe practices for arc welding and cutting equip-

ment, we urge you to read our booklet, “Precautions and Safe Practices for Arc

Welding, Cutting, and Gouging,” Form 52-529. Do NOT permit untrained persons to

install, operate, or maintain this equipment. Do NOT attempt to install or operate this

equipment until you have read and fully understand these instructions. If you do not

fully understand these instructions, contact your supplier for further information. Be

sure to read the Safety Precautions before installing or operating this equipment.

USER RESPONSIBILITY

This equipment will perform in conformity with the description thereof contained in this manual and

accompanying labels and/or inserts when installed, operated, maintained and repaired in accordance with

the instructions provided. This equipment must be checked periodically. Malfunctioning or poorly maintained

equipment should not be used. Parts that are broken, missing, worn, distorted or contaminated should be

replaced immediately. Should such repair or replacement become necessary, the manufacturer recommends

that a telephone or written request for service advice be made to the Authorized Distributor from whom it

was purchased.

This equipment or any of its parts should not be altered without the prior written approval of the manu-

facturer. The user of this equipment shall have the sole responsibility for any malfunction which results from

improper use, faulty maintenance, damage, improper repair or alteration by anyone other than the manufac-

turer or a service facility designated by the manufacturer.

READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR

OPERATING.

PROTECT YOURSELF AN D OTHERS!

TABLE OF CONTENTS

SECTION 1: SAFETY ..............................................................................................................1-1

1.0 Safety Precautions......................................................................................1-1

SECTION 2 SYSTEM: INTRODUCTION ................................................................................2-1

2.01 How To Use This Manual ...........................................................................2-1

2.02 Equipment Identiﬁcation .............................................................................2-1

2.03 Receipt Of Equipment.................................................................................2-1

2.04 Power Supply Speciﬁcations ......................................................................2-2

2.05 Input Wiring Speciﬁcations .........................................................................2-3

2.06 Power Supply Features ..............................................................................2-4

SECTION 2 TORCH: INTRODUCTION.................................................................................2T-1

2T.01 Scope of Manual.......................................................................................2T-1

2T.02 General Description ..................................................................................2T-1

2T.03 Speciﬁcations ...........................................................................................2T-1

2T.04 Options And Accessories..........................................................................2T-2

2T.05 Introduction to Plasma ..............................................................................2T-2

SECTION 3 SYSTEM: INSTALLATION ..................................................................................3-1

3.01 Unpacking...................................................................................................3-1

3.02 Lifting Options.............................................................................................3-1

3.03 Opening the Contactor Cover .....................................................................3-1

3.04 Primary Input Power Connections ..............................................................3-1

3.05 Gas Connections ........................................................................................3-3

SECTION 3 TORCH: INSTALLATION .................................................................................3T-1

3T.01 Torch Connections....................................................................................3T-1

3T.02 Setting Up Mechanical Torch....................................................................3T-1

SECTION 4 SYSTEM: OPERATION .......................................................................................4-1

4.01 Front Panel Controls / Features..................................................................4-1

4.02 Preparations for Operation .........................................................................4-2

SECTION 4 TORCH: OPERATION .......................................................................................4T-1

4T.01 Torch Parts Selection ...............................................................................4T-1

4T.02 Cut Quality ................................................................................................4T-1

4T.03 General Cutting Information......................................................................4T-2

4T.04 Hand Torch Operation ..............................................................................4T-3

4T.05 Gouging ....................................................................................................4T-6

4T.06 Mechanized Torch Operation ...................................................................4T-7

4T.07 Parts Selection for SL100 Torch Cutting ..................................................4T-9

4T.08 Recommended Cutting Speeds for SL100 Torch With Exposed Tip......4T-10

4T.09 Recommended Cutting Speeds for SL100 Torch With Shielded Tip......4T-14

PATENT INFORMATION.....................................................................................................4T-20

TABLE OF CONTENTS

SECTION 5 SYSTEM: SERVICE.............................................................................................5-1

5.01 General Maintenance .................................................................................5-1

5.02 Maintenance Schedule ...............................................................................5-2

5.03 Common Faults ..........................................................................................5-2

5.04 Fault Indicator .............................................................................................5-3

5.05 Basic Troubleshooting Guide......................................................................5-4

5.06 Power Supply Basic Parts Replacement ....................................................5-6

SECTION 5 TORCH: SERVICE.............................................................................................5T-1

5T.01 General Maintenance ...............................................................................5T-1

5T.02 Inspection and Replacement of Consumable Torch Parts .......................5T-2

SECTION 6: PARTS LISTS.....................................................................................................6-1

6.01 Introduction .................................................................................................6-1

6.02 Ordering Information...................................................................................6-1

6.03 Power Supply Replacement .......................................................................6-1

6.04 Replacement Power Supply Parts ..............................................................6-2

6.05 Options and Accessories ............................................................................6-2

6.06 Replacement Parts for Hand Torch ...........................................................6-3

6.07 Replacement Parts - for Machine Torches with Unshielded Leads ............6-4

6.08 Replacement Shielded Machine Torch Leads Assemblies ........................6-6

6.09 Torch Consumable Parts (SL100) ..............................................................6-7

APPENDIX 1: SEQUENCE OF OPERATION (BLOCK DIAGRAM) ...................................... A-1

APPENDIX 2: DATA TAG INFORMATION............................................................................ A-2

APPENDIX 3: TORCH PIN - OUT DIAGRAMS...................................................................... A-3

APPENDIX 4: TORCH CONNECTION DIAGRAMS .............................................................. A-4

APPENDIX 5: SYSTEM SCHEMATIC, 208/460V UNITS....................................................... A-6

Revision History .................................................................................................................... A-8

ESAB CUTMASTER 120

Manual 0-5380 GENERAL INFORMATION 1-1

1.0 Safety Precautions

Users of ESAB welding and plasma cutting equipment have the ultimate responsibility for ensuring that anyone who works

on or near the equipment observes all the relevant safety precautions. Safety precautions must meet the requirements that

apply to this type of welding or plasma cutting equipment. The following recommendations should be observed in addition

to the standard regulations that apply to the workplace.

All work must be carried out by trained personnel well acquainted with the operation of the welding or plasma cutting

equipment. Incorrect operation of the equipment may lead to hazardous situations which can result in injury to the operator

and damage to the equipment.

1. Anyone who uses welding or plasma cutting equipment must be familiar with:

- its operation

- location of emergency stops

- its function

- relevant safety precautions

- welding and / or plasma cutting

2. The operator must ensure that:

- no unauthorized person stationed within the working area of the equipment when it is started up.

- no one is unprotected when the arc is struck.

3. The workplace must:

- be suitable for the purpose

- be free from drafts

4. Personal safety equipment:

- Always wear recommended personal safety equipment, such as safety glasses, ﬂame proof

clothing, safety gloves.

- Do not wear loose ﬁtting items, such as scarves, bracelets, rings, etc., which could become

trapped or cause burns.

5. General precautions:

- Make sure the return cable is connected securely.

- Work on high voltage equipment may only be carried out by a qualiﬁed electrician.

- Appropriate ﬁre extinguishing equipment must be clearly marked and close at hand.

- Lubrication and maintenance must not be carried out on the equipment during operation.

Dispose of electronic equipment at the recycling facility!

In observance of European Directive 2002/96/EC on Waste Electrical and Electronic Equipment and its

implementation in accordance with national law, electrical and/or electronic equipment that has reached the

end of its life must be disposed of at a recycling facility.

As the person responsible for the equipment, it is your responsibility to obtain information on approved col-

lection stations.

For further information contact the nearest ESAB dealer.

ESAB can provide you with all necessary cutting protection and accessories.

SECTION 1: SAFETY

ESAB CUTMASTER 120

GENERAL INFORMATION Manual 0-5380

1-2

WARNING Arc welding and cutting can be injurious to yourself and others. Take

precautions when welding and cutting. Ask for your employer's safety

practices which should be based on manufacturers' hazard data.

ELECTRIC SHOCK - Can kill.

- Install and earth (ground) the welding or plasma cutting unit in accordance with appli-

cable standards.

- Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.

- Insulate yourself from earth and the workpiece.

- Ensure your working stance is safe.

FUMES AND GASES - Can be dangerous to health.

- Keep your head out of the fumes.

- Use ventilation, extraction at the arc, or both, to take fumes and gases away from your

breathing zone and the general area.

ARC RAYS - Can injure eyes and burn skin.

- Protect your eyes and body. Use the correct welding / plasma cutting screen and ﬁlter

lens and wear protective clothing.

- Protect bystanders with suitable screens or curtains.

FIRE HAZARD

- Sparks (spatter) can cause ﬁre. Make sure therefore that there are no inﬂammable mate-

rials nearby.

NOISE - Excessive noise can damage hearing.

- Protect your ears. Use earmuffs or other hearing protection.

- Warn bystanders of the risk.

MALFUNCTION - Call for expert assistance in the event of malfunction.

READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR OPERATING.

PROTECT YOURSELF AND OTHERS!

WARNING Do not use the power source for thawing frozen pipes.

CAUTION Class A equipment is not intended for use in residential locations

where the electrical power is provided by the public low-voltage

supply system. There may be potential difﬁculties in ensuring

electromagnetic compatibility of class A equipment in those loca-

tions, due to conducted as well as radiated disturbances.

CAUTION This product is solely intended for metal removal. Any other use may

result in personal injury and / or equipment damage.

CAUTION Read and understand the instruction manual before

installing or operating.

ESAB CUTMASTER 120

Manual 0-5380 INTRODUCTION 2-1

SECTION 2 SYSTEM:

INTRODUCTION

2.01 How To Use This Manual

This Owner’s Manual applies to just speciﬁcation or part

numbers listed on page i.

To ensure safe operation, read the entire manual, includ-

ing the chapter on safety instructions and warnings.

Throughout this manual, the words WARNING, CAU-

TION, and NOTE may appear. Pay particular attention

to the information provided under these headings. These

special annotations are easily recognized as follows:

NOTE!

An operation, procedure, or background

information which requires additional

emphasis or is helpful in efﬁcient operation

of the system.

CAUTION

A procedure which, if not properly followed,

may cause damage to the equipment.

WARNING

A procedure which, if not properly followed,

may cause injury to the operator or others

in the operating area.

WARNING

Gives information regarding possible electri-

cal shock injury. Warnings will be enclosed

in a box such as this.

DANGER

Means immediate hazards which, if not

avoided, will result in immediate, serious

personal injury or loss of life.

Additional copies of this manual may be purchased by

contacting ESAB at the address and phone number in

your area listed on back cover of this manual. Include

the Owner’s Manual number and equipment identiﬁca-

tion numbers.

Electronic copies of this manual can also be downloaded

at no charge in Acrobat PDF format by going to the

ESAB web site listed below

http://www.esab.com.br

2.02 Equipment Identiﬁcation

The unit’s identiﬁcation number (speciﬁcation or part

number), model, and serial number usually appear on

a data tag attached to the rear panel. Equipment which

does not have a data tag such as torch and cable as-

semblies are identiﬁed only by the speciﬁcation or part

number printed on loosely attached card or the shipping

container. Record these numbers on the bottom of page

i for future reference.

2.03 Receipt Of Equipment

When you receive the equipment, check it against the

invoice to make sure it is complete and inspect the

equipment for possible damage due to shipping. If there

is any damage, notify the carrier immediately to ﬁle a

claim. Furnish complete information concerning damage

claims or shipping errors to the location in your area

listed in the inside back cover of this manual.

Include all equipment identiﬁcation numbers as de-

scribed above along with a full description of the parts

in error.

Move the equipment to the installation site before

un-crating the unit. Use care to avoid damaging the

equipment when using bars, hammers, etc., to un-crate

the unit.

ESAB CUTMASTER 120

INTRODUCTION Manual 0-5380

2-2

2.04 Power Supply Speciﬁcations

ESAB Cutmaster®120 Power Supply Speciﬁcations

Input Power 208 / 230 VAC (187 - 253 VAC), Single Phase, 60 Hz

230 VAC (187 - 253 VAC), Three Phase, 50/60 Hz

380 VAC (360 - 440 VAC), Three Phase, 50/60 Hz

400 VAC (360 - 440 VAC), Three Phase, 50 Hz

460 VAC (414 - 506 VAC), Single Phase, 60 Hz

460 VAC (414 - 506 VAC), Three Phase, 60 Hz

600 VAC (540 - 630), Three Phase, 60 Hz

Input Power Cable Power Supply includes input cable.

Output Current 30 - 120 Amps, Continuously Adjustable

Power Supply Gas

Filtering Ability

Particulates to 5 Microns

ESAB Cutmaster®120 Power Supply Duty Cycle *

Ambient Temperature Duty Cycle Ratings @ 40° C (104° F)

Operating Range 0° - 50° C

All Units Duty Cycle **60% 80% 100%

Current 120 120 100

IEC IEC IEC

DC Voltage 128 128 120

* NOTE: The duty cycle will be reduced if the primary input power (AC) is low

or the output voltage (DC) is higher than shown in this chart.

**60% at 208/230V 1 Phase input ONLY

NOTE!

IEC Rating is determined as speciﬁed by the International Electro-Technical Commission. These speciﬁca-

tions include calculating an output voltage based upon power supply rated current. To facilitate comparison

between power supplies, all manufacturers use this output voltage to determine duty cycle.

Power Supply Dimensions & Weight Ventilation Clearance Requirements

30.5"

774.7 mm

63 lb / 28.6 kg

10.75"

273 mm

16.375"

416 mm

Art # A-08358_AB

150 mm

24"

610 mm

150 mm

Art # A-07925_AB

Andere Handbücher für Cutmaster 120

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ESAB Schweißsystem Handbücher

ESAB

ESAB Caddy Tig 2200i AC/DC Bedienungsanleitung

ESAB

ESAB AristoPower 4600c Bedienungsanleitung

ESAB

ESAB ST-16 Bedienungsanleitung

ESAB

ESAB A22 POB Gebrauchsanweisung

ESAB

ESAB Caddy Tig 2200i AC/DC Bedienungsanleitung

ESAB

ESAB Aristo Origo Feed 3004 Bedienungsanleitung

ESAB

ESAB MigMaster 210 Bedienungsanleitung

ESAB

ESAB CIGWELD Transmig 255i Bedienungsanleitung

ESAB

ESAB Plasmarc EPP-450 Bedienungsanleitung

ESAB

ESAB PT-27 Bedienungsanleitung

ESAB

ESAB Aristotig 405 AC/DC Bedienungsanleitung

ESAB

ESAB Caddy 150 Bedienungsanleitung

ESAB

ESAB CIGWELD WeldSkill 100 MIG Bedienungsanleitung

ESAB

ESAB EMP 205ic AC/DC Firmware-Update

ESAB

ESAB A-14032 Bedienungsanleitung

ESAB

ESAB Aristo Mig 5000i 400 V Bedienungsanleitung

ESAB

ESAB LPH 80 Bedienungsanleitung

ESAB

ESAB Mig 4004i Bedienungsanleitung

ESAB

ESAB Origo Mig 4002c Bedienungsanleitung

ESAB

ESAB EASY-WELD SSR 400 Betriebsanleitung

ESAB

ESAB EM 215ic Bedienungsanleitung

ESAB

ESAB PCM-1125 Bedienungsanleitung

ESAB

ESAB ESABMig C420 Bedienungsanleitung

ESAB

ESAB PT-36 Bedienungsanleitung

Beliebte Schweißsystem Handbücher anderer Marken

Berner

Berner PLASMACUT 54 Bedienungsanleitung

Pro Spot

Pro Spot PR-155 Bedienungsanleitung

Forney

Forney 210 Bedienungsanleitung

Thermal Arc

Thermal Arc 400S Bedienungsanleitung

Lincoln Electric

Lincoln Electric HANDYMIG 170I Bedienungsanleitung

GYS

GYS PROTIG 201 AC/DC Bedienungsanleitung

TAFA

TAFA 30*8B35 Bedienungsanleitung

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Bedienungsanleitung

CIGWELD

CIGWELD 636804 Kurzanleitung

Red-D-Arc

Red-D-Arc DC-400 Bedienungsanleitung

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Bedienungsanleitung

Elettro

Elettro HI-MIG 3000 SYNERGIC Bedienungsanleitung

WIA

WIA Weldmatic 270 CP132-2 Bedienungsanleitung

Sonics

Sonics H520T Bedienungsanleitung

Miller

Miller Big Blue 400D Bedienungsanleitung

NewArc

NewArc RT2000 Kurzanleitung

Hypertherm

Hypertherm powermax1000 Bedienungsanleitung

Lincoln Electric

Lincoln Electric POWER WAVE I400 Bedienungsanleitung