Eschenbach Visolux DIGITAL HD Bedienungsanleitung

Bedienungsanleitung

Operating instructions

Mode d'emploi

Manual de instrucciones

Istruzioni d'uso

Gebruiksaanwijzing

Betjeningsvejledning

Bruksanvisning

Käyttöopas

Instrukcja obsługi

Návod k obsluze

- 18 -

English

Dear Customer,

we congratulate you on the purchase of this electronic reader. a quality

product made by Eschenbach.

As the market leader for magnifying glasses and reading aids, we at

Eschenbach can look back over many years of experience and this is

reflected in the quality, usability and design of our products.

Firmware version

These instructions apply to the firmware version "VD7_fw_v1.0.0"

installed on this device or higher.

Before first use

Read this manual carefully through before using the device for the first

time. Careful reading of this comprehensive instruction manual is the best

way to familiarise yourself with all the functions of the visolux DIGITAL

HD.

Safety information

XRisk of glare and injury! Never look directly at the light source on

the underside of the housing! Risk group 1 according to EN 62471:

2008. Exposure hazard value (EHV): 2200 seconds at 800 mm. The

limit values of the exempt group are complied with at a distance

of 1.8 m. Retinal danger due to actinic light 400 nm to 780 nm.

XDo not allow children to handle electronic devices without super-

vision.

XOnly charge the reader with the mains adapter supplied!

- 19 -

XCheck your visolux DIGITAL HD and the mains adapter and its power

cable for visible damage. If the visolux DIGITAL HD, the mains

adapter or its cable are damaged, disconnect the mains adapter

from the mains power immediately. Ask a qualified specialist to

check the product before you use it again.

XNever open the housing of the visolux DIGITAL HD. There are no

serviceable parts whatsoever inside. Opening the device will void

the guarantee.

XNever expose the visolux DIGITAL HD to moisture.

XProtect the visolux DIGITAL HD from knocks or blows and excessive

heat! Never place the visolux DIGITAL HD on a heater or in direct

sunlight!

XThe heatsink on the rear of the device dissipates the heat produced

inside during operation. Considerable warming up is normal.

XEnsure that other people, particularly children, are aware of these

risks!

Package contents

Xvisolux DIGITAL HD

XUSB cable (Type C)

XHDMI cable

XCharger with adapters for EU, GB, US, AUS

XCase

XCleaning cloth

XOperating instructions

XLanyard

- 20 -

Operating elements

(Illustrations see fold-out page)

1. Right-hand scrolling button

2. Charging check LED

3. Connection for mains adapter

4. USB connection

5. "MENU" button for opening menu control

6. HDMI output

7. Fold-out stand foot

8. Left-hand scrolling button

9. LED illumination for reading material

10. Heatsink

11. Camera

12. Button for increasing zoom factor

13. Button for decreasing zoom factor

14. Display

15. On/Off button

16. button for calling up contrast functions

17. button for saving image files and confirming menu options

18. SD card

19. Cover over SD card slot

20. Eyelet for pulling lanyard through to suspend device

21. Opening above reset button

- 21 -

Operation

Charging the internal battery:

You must completely charge the internal batteries before you can use

the visolux DIGITAL HD for the first time independently of the mains

power supply!

To charge, insert the charging cable plug into the connection for the

mains adapter (e) on the visolux DIGITAL HD. Then connect the mains

adapter with the adapter appropriate for the operating location and plug

the mains adapter into a power outlet. Charging takes about 3 hours.

The charging indicator LED (w) will light up red during the charging

process. When the charging process is complete it will light up green.

Disconnect the mains adapter from the power socket and the visolux

DIGITAL HD once charging is completed.

You can use the visolux DIGITAL HD during the charging process. Using

the reader while charging will, however, prolong the charging time.

Switching on/off

Press and hold the On/Off button (h) for one second to switch the vi-

solux DIGITAL HD on. The camera image will appear in live image mode

on the display (g). 3 icons appear on the upper edge of the screen for

approx. 2 seconds to indicate the battery charge level, the current zoom

factor and the display brightness: The battery symbols have the following

meanings:

Battery fully charged 75% charge 50 % charge

25 % charge Battery empty

Press and hold the On/Off button for (h) for one second to switch the

device off. The current zoom, screen mode and brightness settings will

be saved.

- 22 -

To prolong the battery charge in the internal battery, the visolux DIGITAL

HD switches off automatically if it is not moved for more than 5 minutes.

If you want to use the reader again after this time, switch it on again.

Reading with the device

Switch the visolux DIGITAL HD on, fold the stand foot (u) out and place

the device over the reading material. The image of the area below the

camera (s) is shown on the display (g).

If you are using the device with the minimum zoom factor 2×you will

see the complete image section of 7 cm on the display. If the zoom is

increased, this image section will decrease.

DLS (Dynamic Line Scrolling)

Thanks to the scrolling function it is not necessary to move the entire

device to one side in order to read a complete newspaper column, even

at high zoom factors. Press the right-hand scroll button (q) repeatedly

or keep it pressed down to move the image section to the right. Press

the left hand scroll button (i) repeatedly or keep it pressed down to

move the image section to the left.

Press the left hand scroll button twice quickly to move the image section

to the left-hand border. This enables you to find the beginning of the next

line quickly.

Start reading.

- 23 -

Tips to improve orientation:

The stand foot is provided with notches (A) which are arranged in align-

ment with the camera axis. You can use these notches to place the

device over round objects more easily, for example to read ingredient

information on tins etc.

You will find noticeable bulges (B) on the underside which mark the

sideward limits of the visible area.

You will find noticeable markings (C) on the front side which mark the

position of the camera on the underside.

- 24 -

Adjusting the zoom factor

When switched on, the camera image will be shown with the zoom fac-

tor you used the previous time you switched the device on. Press and

hold the button to increase the zoom up to factor 22×. Press and

hold the button to decrease the zoom down to factor 2×. You can

also repeatedly press these buttons briefly to change the zoom factor.

False colour display

To show the camera image for contrast increase in false colours, press

the button (j). If necessary, press this button repeatedly to switch

through the various false colour modes and to return to true colour dis-

play. As delivered, the false colours are preset to b/w and w/b.

To set up further false colour displays, call up the false colour selec-

tion submenu. To do this press the MENU button (t), use the to scroll

buttons (q, i) to move to the symbol and confirm your selection

by pressing the button. After this, use the scroll buttons (q, i) to

select the symbol above and confirm this again with the button.

You can activate the required false colour combinations using the two

scroll buttons (q, i), and confirm the status change with the button.

Non-activated combinations are shown with an ×.

Press the MENU button (t), to close the settings menu.

Saving the live image as a file

Press the button (k) briefly to show the current camera image on

the display as a still image and to save it to the inserted SD card as a

file. Press the button again to return to the live image display.

- 25 -

Calling up images from the SD card

To display images previously saved to the SD card, press and hold the

button for 3 seconds or open the settings menu for this purpose

described below using the MENU button (t) and the symbol. The

following menu appears:

The currently selected image file is displayed centrally below this. The

previous image is shown to the left, the next image is shown to the right.

You can use the two scroll buttons (q, i) to select the individual sym-

bols which have the functions described below:

- select the previous image file

- select the next image file

- select the currently selected file as a favourite. If you have not

selected a favourite the symbol is crossed out.

Tip: The image file marked as favourite is always displayed centrally

underneath the symbols when the menu is called up. For this

reason, only one file can ever be marked as favourite.

- delete the selected image file from the SD card

- close the menu and return to live image view

The symbol for the selected function is always shown slightly larger.

To activate the function you have selected, press the button (k).

To display the centre image file to fill the display, press the button.

You can use the and buttons to set the required zoom factor.

Andere Handbücher für visolux DIGITAL HD

Inhaltsverzeichnis

Andere Eschenbach Vergrößerungsglas Handbücher

Eschenbach

Eschenbach Scribolux Bedienungsanleitung

Eschenbach

Eschenbach laboCLIP Bedienungsanleitung

Eschenbach

Eschenbach Smartlux digital Bedienungsanleitung

Eschenbach

Eschenbach maxiPLUS Bedienungsanleitung

Eschenbach

Eschenbach Menas Lux Bedienungsanleitung

Eschenbach

Eschenbach easyPOCKET Bedienungsanleitung

Eschenbach

Eschenbach MOBILUX ECONOMY Bedienungsanleitung

Eschenbach

Eschenbach visomax Bedienungsanleitung

Eschenbach

Eschenbach Mobilux LED Series Bedienungsanleitung

Eschenbach

Eschenbach laboMED Bedienungsanleitung

Eschenbach

Eschenbach Mobilux Digital Touch HD 16511 Bedienungsanleitung

Eschenbach

Eschenbach 11547 Bedienungsanleitung

Eschenbach

Eschenbach varioLED 27770 Bedienungsanleitung

Eschenbach

Eschenbach Prisma Bedienungsanleitung

Eschenbach

Eschenbach mobilux Digital Touch HD Bedienungsanleitung

Eschenbach

Eschenbach Visolux Digital XL FHD Bedienungsanleitung

Eschenbach

Eschenbach 2775 Bedienungsanleitung

Eschenbach

Eschenbach 15112 mobilux LED Bedienungsanleitung

Eschenbach

Eschenbach varioLED + Bedienungsanleitung

Eschenbach

Eschenbach Vario DIGITAL 22 FHD Advanced Bedienungsanleitung

Eschenbach

Eschenbach visolux DIGITAL HD Bedienungsanleitung

Eschenbach

Eschenbach System varioPLUS Bedienungsanleitung

Eschenbach

Eschenbach 11547 Bedienungsanleitung

Eschenbach

Eschenbach Makrolux 143611 Bedienungsanleitung

Beliebte Vergrößerungsglas Handbücher anderer Marken

HIMS

HIMS SenseView DUO Bedienungsanleitung

nedis

nedis MAGL12WWT Bedienungsanleitung

Ryobi

Ryobi RML18-0 Bedienungsanleitung

ENHANCED VISION

ENHANCED VISION Merlin Bedienungsanleitung

Ash Technologies

Ash Technologies Andromeda Bedienungsanleitung

Baum

Baum VisioBook Handbuch

HIMS

HIMS GoVision PRO Bedienungsanleitung

OPTRON

OPTRON i-Stick Bedienungsanleitung

LS & S

LS & S 251107 Bedienungsanleitung

VisionAid

VisionAid HandyReader HD v2 Bedienungsanleitung

Carson

Carson SV-50 Bedienungsanleitung

MAGINON

MAGINON TL-70 Bedienungsanleitung

Optelec

Optelec Compact 7 HD Bedienungsanleitung

Optelec

Optelec ClearView GO Bedienungsanleitung

Carson

Carson Lighted MagniGrip MG-88 Bedienungsanleitung

VisionAid

VisionAid Helix HD Bedienungsanleitung

Eurotops

Eurotops FS75RC Bedienungsanleitung

Humanware

Humanware Prodigi DUO Bedienungsanleitung