Essilor Neksia Bedienungsanleitung
User Manual
CONTENTS
INTRODUCTION 7
I. FIRST STEPS ITH NEKSIA 9
1. Descriptive diagrams 10
2. Connection to an edger 11
3. Using the tracer-centerer-blocker 12
a. Turn on and turn off the tracer-centerer-blocker 12
b. Using the touch screen and keypads 12
c. ork screen 14
II. TRACING 15
1. The tracing environment 16
a. Menu screen 16
b. Jobs and working modes 18
c. Displaying the binocular view 20
2. Shape management and storage 22
a. Menu screen 22
b. Job list 24
c. Creating a job 24
d. orking in current job mode (job A) 25
3. Tracing a rimmed frame 26
4. Tracing a high-base frame (option) 27
5. Tracing a pattern, demo lens or recut lens 30
a. Optical tracing (option) 30
b. Mechanical tracing 32
c. Inputting the curve and the frame base after monocular tracing 35
III. CENTERING 39
1. Centering environment 40
a. Menu screen 40
b. Call a shape (if the connection to Tess is activated) 42
c. Using the tripods 43
d. Centering modes 43
e. Centering help 44
2. Centering a single vision lens 44
3. Centering a progressive lens 47
a. Centering a progressive lens using re-marked micro-engravings 47
b. Centering a lens using manufacturer markings 50
4. Centering bifocal / trifocal lenses 52
5. Centering an executive lens 54
6. Centering a mid-distance lens 56
a. Centering a lens using re-marked micro-engravings 57
b. Centering a lens using manufacturer markings 59
7. Centering for a high-base frame 61
8. Blocking a lens 61
a. Preparing blocking 62
USER MANUAL> CONTENTS
b. Block the lens 63
IV. MODIFYING THE LENS SHAPE 65
1. Menu screen 66
2. Modifying a shape 67
a. Enlarging, reducing or rotating a shape 67
b. Free-form modification 70
c. Retouching a shape 71
3. Archiving / saving a shape 72
V. PREPARING A DRILLED JOB 73
1. Legend screen 75
2. Configuring a drilling point 78
a. Creating a drilling point 78
b. Delete one drilling point 79
c. Dimensioning a drilling point 79
d. Adjusting the position of a drilling point 80
3. Drilling models 83
a. Importing a model 83
b. Saving a model 84
VI. PREPARING LENS EDGING 87
1. Menu screen 88
2. Edging configuration 90
VII. TRACER-CENTERER-BLOCKER CONFIGURATION 91
1. Configure the tracer-centerer-blocker 92
a. Time, date and language 92
b. Options 93
c. Connections 94
d. Screensaver and brightness of the work area 95
2. Customize the tracer-centerer-blocker, 96
a. orking modes and display precision 97
b. Decentration mode 98
c. Action bar 99
d. Brightness 101
3. Restoring the factory settings 102
VIII. MAINTENANCE & SERVICING 103
1. Carrying out the autotests 104
2. Check and calibrate (remote lens edging option) 105
a. Check and calibrate the tracing table (option) 105
b. Check and calibrate the blocking arm 108
c. Calibrate the touch screen 110
3. Make a backup of the jobs and display configuration 110
4. Statistics and technical history 113
a. Tracer-centerer-blocker statistics 113
b. Technical log and errors 114
5. Maintain and clean the tracer-centerer-blocker 115
a. Precautions required 115
b. Cleaning the centering chamber glass 115
USER MANUAL> CONTENTS
TECHNICAL DATA 117
1. Tracer-centerer-blocker 118
2. Environment 119
GENERAL INFORMATION 121
1. Symbols 122
2. Modifications 122
3. Declaration of conformity 122
4. Copyright 123
5. Materials and products 123
6. Safety instructions: 123
7. Electromagnetic waves 124
GLOSSARY 125
USER MANUAL> CONTENTS
INTRODUCTION
To take full advantage of the functions of your tracer-centerer-blocker, documentation is available in:
•the introduction guide provided at the time of installation
•the user manual, present on the CD-ROM
The screens may vary according to the edger connected to the tracer-centerer-blocker. This documentation
was produced with a connection to the Neksia edger.
USER MANUAL> INTRODUCTION
7
Neksia > v1-02-14
Neksia > v1-02-14
8
USER MANUAL> INTRODUCTION
I. FIRST STEPS ITH NEKSIA
This chapter contains all the information concerning a first use of the tracer-centerer-blocker:
•description of the tracer-centerer-blocker (F p.10)
•connection to an edger (F p.11)
•using the device (F p.12)
1. DESCRIPTIVE DIAGRAMS
This section contains the descriptions and list of accessories of the tracer-centerer-blocker:
1. Screen
2. Blocking arm
3. Centering chamber
4. Tripod
5. Tracing table
6. ON/OFF b tton
7. Connectors
8. Man fact rer plate
1. RS232 (edger) port
2. Barcode reader port
Neksia > v1-02-14
10
USER MANUAL> I. FIRST STEPS ITH NEKSIA
Andere Handbücher für Neksia
1
Inhaltsverzeichnis
Andere Essilor Drehbank Handbücher
