ETC Echoflex Elaho Inspire Station Betriebsanleitung

Part Number: 8186M1220-3.1.0 Rev.A

Released: 2018-09

Elaho Inspire Stations

Programming Guide

Echo Protocol Version 3.1

ETC®and Inspire®are registered trademarks of Electronic Theatre Controls, Inc. in the United States and

other countries.

All other trademarks, both marked and not marked, are the property of their respective owners. Echoflex

intends this document, whether printed or electronic, to be provided in its entirety.

Table of Contents

Table of Contents i

Introduction 1

Document Conventions 1

Help from Technical Services 2

Overview 3

Station Configuration 4

Record/Program Mode 4

Function switch 4

Rotary and DIPSwitches 4

Function switch: Preset 4

Preset Toggle 4

Use Off 5

Preset Mode Raise / Lower 5

Sequence Control 5

Function switch: Custom 5

With ElahoAccess 5

Without ElahoAccess 6

Function switch: Zone 6

Zone Selection 6

Zone Toggle 6

Space Toggle (4 button with fader station only) 6

Zone Raise / Lower 7

Color Control Mode (4 button with fader station only) 8

Record/Program Mode 10

Program Preset Start 10

Record Preset 10

Program Zone Start 11

Space Combine (4-button only) 12

Combining Spaces 12

Program Mode for Space Combine 13

Function Switch for Space Combine 13

Function switch: Preset 13

Function switch: Zone 13

Station Functionality 14

1-Button Station 15

Factory Defaults 15

Preset 15

Zone 16

Custom 17

2-Button Station 18

Factory Defaults 18

Preset 18

Zone 19

Custom 19

4-Button Station 21

Factory Defaults 21

Preset 21

Zone 22

Custom 23

Space Combine in Preset 23

Space Combine in Zone 24

Space Combine in Custom 25

4-Button with Fader Station 26

Factory Defaults 26

Preset 26

Zone 27

Zone with Color Control Enabled 28

Custom 30

6-Button Station 31

Factory Defaults 31

Preset 31

Zone 32

Custom 33

8-Button Station 34

Factory Defaults 34

Preset 34

Zone 35

Custom 36

Station Miscellaneous 37

Remove or Install the Wall Plate 38

ii Elaho Inspire Station Programming Guide

Remove Wall Plate 38

Install Wall Plate 38

Install Button Legends 39

Rotary Switch Assignments 40

DIP Switch Settings 40

4-Button with Fader Station Color Mode DIP Switch Settings 41

Table of Contents iii

1 Elaho Inspire Station Programming Guide

Introduction

Welcome to the Elaho®Inspire Station Programming Guide. This document will guide you in the

programming and configuration of your Elaho Inspire Stations, including the 1-button, 2-button,

4-button, 6-button, 8-button, and the 4-button with fader station.

This guide is intended for use after station installation; therefore the content of this document is

targeted at programming the configuration and features of the station only.

For detailed information regarding installation, please reference the Elaho Inspire Station

Installation Guide available for download on the Echoflex website echoflexsolutions.com.

For detailed information regarding the configuration of the Inspire station using ElahoAccess,

reference the ElahoAccess Mobile App integrated help system.

Document Conventions

This document uses the following convention to draw your attention to important information.

Note: Notes are helpful hints and information that is supplemental to the main text.

Echoflex's user documents are designed for printed or electronic use. However, there are many

advantages to using the electronic (.PDF) versions. In addition to the benefits of a PDF (such as

word search, bookmarks, and commenting tools) you can click on headings in the Table of

Contents and jump to the desired page.

Throughout this document, any cross-references (indicated in blue like this:

DIP Switch Settings

on page40

are links that may be clicked to jump to the specific part of the manual. All of

Echoflex's documents are available for free download from our website echoflexsolutions.com.

Please email comments about this manual to: TechComm@etcconnect.com.

Introduction 2

Help from Technical Services

If you are having difficulties, your most convenient resources are the references given in this

document. To search more widely, try the Echoflex website at echoflexsolutions.com. If none of

these resources are sufficient, contact Echoflex Technical Services directly at one of the offices

identified below.

When calling for help, take these steps first:

•

Prepare a detailed description of the problem

•

Go near the equipment for troubleshooting

•

Find your notification number if you have called in previously

Echoflex

38924 Queensway Unit #1

Squamish, British Columbia

Canada, V8B 0K8

888-324-6359 (toll-free)

+1-778 733-0111

info@echoflexsolutions.com

3 Elaho Inspire Station Programming Guide

Overview

Elaho Inspire stations provide preset, zone, space combine, and color controls for use with

Elahocontrol systems only.

Reference

Station Functionality on page14

for detailed information about each station type and

its possible function settings, or download the Inspire Station data sheet located on the Echoflex

website echoflexsolutions.com for the complete listing including model and ordering

information.

This programming guide is provided to detail the basic functions of the Inspire stations. For more

detailed information about the custom configuration options using ElahoAccess, reference the

ElahoAccess Mobile App integrated help system.

Overview 4

Station Configuration

The Elaho Inspire Station has on-board switch and button settings that are available from the

front of the station when it is installed and the cover is removed.

RECORD/

PROGRAM

MODE

Function switch

PRESET

CUSTOM

ZONE

Record/Program Mode

The [RECORD/PROGRAM MODE] button provides access to

record and program settings. The associated LED indicates

mode status.

Function switch

The Function switch determines how the controls of the station

function. It has behavior settings of Preset, Custom, and Zone.

Rotary and DIPSwitches

Additional rotary and DIP switch settings are accessible on the rear of

the station.

These settings typically are made prior to final installation of the

station. Reference

Rotary Switch Assignments

and

DIP Switch Settings

on page40

for more information.

Also reference the Elaho Inspire Station Installation Guide for detailed

information regarding these switches and settings.

Function switch: Preset

Setting the Function switch to Preset (the highest switch setting) on an Inspire Station allows you

to perform preset related actions such as preset toggle, Off, record (snapshot levels), space

raise/lower, and sequence control (1 button station only).

Preset Toggle

Preset toggle control functionality allows you to toggle the preset on and off by pushing the

assigned preset button or fader knob.

•

A single button push activates / deactivates the preset that is assigned to that button using

a two second fade time.

•

A double button push activates / deactivates the preset that is assigned to that button

using a 1/2 second fade time.

Note: A double-tap of any preset button will toggle the configured preset using a 1/2

second fade time for quick preset recall.

When a preset is active, the button LED lights blue to indicate its active state. If preset levels are

altered while the preset is still active, the related button LED will return to its default state,

either off or amber. Reference

DIP Switch Settings on page40

5 Elaho Inspire Station Programming Guide

Use Off

“Use Off” functionality enables the last button on the station with a dedicated space off action.

•

A single push of the “Off” button will set the level of all zones to zero using a 2 second

fade time.

•

A double push of the “Off” button will set the level of all zones to zero using a 1/2 second

fade time.

Use “Off” functionality is enabled when DIP switch 1 is set to On. Reference

DIP Switch Settings

on page40

Note: The 1 button station does not support “Use Off” functionality.

Reference

DIP

Switch Settings

Preset Mode Raise / Lower

Raise and lower levels for all zones in the space using the assigned station buttons or fader knob

(determined by the station type). Reference the appendix for the station type you are

configuring for complete details.

•

Push and hold the assigned raise / lower station button to raise or lower the intensity level

of all zones in the space.

•

Rotating the fader knob will raise or lower the intensity level of all zones in the space.

Sequence Control

Sequence control is available using the 1 button station in conjunction with Echoflex power

control products that support sequences.

DIP switch 1 must be set to the On position to enable sequence mode. For more information

DIP

Switch Settings on page40

In sequence mode, pressing the station button will toggle the sequence for the selected space

(i.e. activate the sequence if it is inactive or deactivate it if it is active). Reference the related

power control product user documentation for the products in your system for more information.

Function switch: Custom

Setting the Function switch to Custom (the middle switch setting) allows for varied features

either with or without ElahoAccess, although the presence of ElahoAccess in the control system

allows for an expanded feature set for Inspire stations.

With ElahoAccess

ElahoAccess provides complete customization of the Inspire station when it is in Custom control

mode. For more information on the configurable device parameters and actions available,

reference the ElahoAccess Mobile App integrated help system.

Note: Changes made in ElahoAccess impact the Custom Function switch setting of

the Inspire stations only. Preset and Zone Function switch settings remain unaffected by

changes made while using ElahoAccess configuration tools.

Andere Handbücher für Echoflex Elaho Inspire Station

Inhaltsverzeichnis

Andere ETC Controller Handbücher

ETC

ETC F-Drive W1 Series Bedienungsanleitung

ETC

ETC Expression Konfigurationshandbuch

ETC

ETC ArcSystem Pro D4 Series Bedienungsanleitung

ETC

ETC ION Bedienungsanleitung

ETC

ETC P-ACP Merkblatt

ETC

ETC F-Drive W1 Series Bedienungsanleitung

ETC

ETC Unison Foundry Bedienungsanleitung

ETC

ETC PENKO Flex Bedienungsanleitung

ETC

ETC Echoflex ELED2-BU Bedienungsanleitung

ETC

ETC Echoflex ELED2 Bedienungsanleitung

ETC

ETC DEBC Bedienungsanleitung

ETC

ETC echoflex ELEDR Bedienungsanleitung

ETC

ETC Unison Mosaic Bedienungsanleitung

ETC

ETC Unison Foundry Relay Controller Bedienungsanleitung

ETC

ETC DMX DEBC-1 Bedienungsanleitung

ETC

ETC EA07 Bedienungsanleitung

ETC

ETC EchoDIN Power Control Processor Mk2 Bedienungsanleitung

ETC

ETC Foundation Rigging Controller Installations- und Betriebshandbuch

ETC

ETC Echoflex ELED3 Bedienungsanleitung

ETC

ETC echoflex ELED2-BCL Bedienungsanleitung

ETC

ETC Element Bedienungsanleitung

ETC

ETC QuickTouch+ Mk2 Bedienungsanleitung

ETC

ETC Paradigm P-TS7-PE Bedienungsanleitung

ETC

ETC Echoflex ELED1-BUN Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch