ETC Echoflex ELED2-BU Bedienungsanleitung

Part Number: 8189M2411 Rev.B

Released: 2023-07

Tunable White Dimming

Controller

Models: ELED2-BU and ELED2H-AU

Configuration Guide

To view a list of Echoflextrademarks and patents, go to echoflexsolutions.com/ip. All other trademarks,

both marked and not marked, are the property of their respective owners.

For a complete list of all third-party licenses that are fully incorporated herein to the extent required by each

third-party license terms and conditions, please visit etcconnect.com/licenses.

Echoflex intends this document, whether printed or electronic, to be provided in its entirety.

Table of Contents

Table of Contents i

Introduction 1

Document Conventions 2

Help from Technical Services 2

Control Features 3

Dim-to-Warm 3

Explicit Color Control 3

Automated Color Tuning 3

Characterized Color Tuning 3

Configuration Options 4

Simple Tap Instructions 4

Radio Communications 4

Repeater Function 4

Status Message 5

Dimming Intensity 5

Tunable White Control 5

Near-Cross Technology 5

Switch Operation 5

Multi-Scene Station Buttons 6

Color Tuning Functions 6

Timed Switches 6

Occupancy-Based Lighting Applications 7

Occupancy Sensor Auto-OFFTimer 7

Save State 7

Grace Timer 7

Photo Inhibit 8

Dual Technology Occupancy Sensors 8

Occupancy Sensors and Partial-ON 8

Occupancy Sensors and Partial-OFF 8

Occupancy Sensors with Switches 8

Open-Plan Shared Occupancy 9

Create a Shared Occupancy Space 9

Hospitality Applications 10

Daylight Harvesting Applications 11

Daylighting Control Override 11

Closed Loop Control 11

Open Loop Control 13

Controller Presets 14

User Interface 15

Power LED and Learn LED 15

Learn Button 15

Remote Linking Solution 16

Clear Button 16

LEDDisplay 16

Blink Indications 17

Red: Linking Channel 1 (Intensity) 17

Green: Linking Channel 2 (Color Temperature) 17

Blue: Linking Channel 3 (CCT Set Point) 17

ii Tunable White Dimming Controller Configuration Guide

Linking Activities 17

Compliance 18

FCC Compliance 18

ISED Compliance 18

Conformité ISDE 18

Table of Contents iii

iv Tunable White Dimming Controller Configuration Guide

Introduction 1

Introduction

The Tunable White Dimming Controller is a wireless lighting controller designed for

spaces/areas where intensity and correlated color temperature (CCT) control are required. The

ELED2 controller creates a range of desired lighting effects based on occupancy state, manual

switch action, ambient light levels, and timeclock or gateway commands for a single LED

fixture or entire zone.

ELED2H-AU

model shown

The ELED2(H) is available in two voltages: 120–277 V and

240–347 V. Its integral relay and two robust 0–10 V

outputs allow the ELED2(H) to control dimmable light and

tunable color temperature levels. Outputs are for

connecting zones or fixtures to provide the intensity and

CCT control. Output 1 is identified by the violet/red stripe

wire, and output 2 is identified by the violet/green stripe

wire.

Three linking channels are for assigning remote devices to

affect the controller's operation. The first linking channel

is for devices affecting intensity, the second channel is for

devices affecting the CCT. The third channel is for

assigning Open Loop CCT set points. The channels are identified by different LED colors that

display when the controller is in link mode, see Blink Indications on page17.

For scenarios where only occupancy sensors are linked to the controller, built-in control begins

by automating lights ON and OFF using occupancy detection. Daylighting control of the fixture

intensity can be quickly setup in either an open or closed loop scenario. The factory defaults

defined for the ELED2(H) are energy code compliant, including occupancy Partial-ON and

Partial-OFF requirements.

Echoflex ELED products include preset functionality that allows spaces to be lit with lighting

scenes. Presets can be activated from scene stations, wireless timeclocks, or gateways and

include values for intensity and color temperature. The lockout feature allows timeclocks to

schedule a controller’s response to specific sensors or stations.

Note: For lighting controls specific to horticultural applications, Echoflex also has a

Bicolor Luminiaire Controller, model ELED2-BCL. This controller uses the same method

to modulate light intensity and blend warm and cool LEDs to provide desired CCT

output. Learn more about the ELED2-BCL at echoflexsolutions.com.

2 Tunable White Dimming Controller Configuration Guide

Document Conventions

Echoflex's user documentation is designed for print or electronic use. Cross-references

highlighted in this document are links to the referenced section of the guide.

Configuration parameters are emphasized in italics. Switch actions (ON/OFF) and dimmer

events (lights ON/OFF) are emphasized in ALL CAPS. Buttons are emphasized in [Bold Bracket].

This document uses the following conventions to draw your attention to important

information.

Note: Notes are helpful hints and information that is supplemental to the main text.

All Echoflex documents are available for free download from our website:

echoflexsolutions.com. Please email comments about this manual to:

TechComm@etcconnect.com.

Help from Technical Services

If you are having difficulties that are not addressed by this document, contact Echoflex support

at service@echoflexsolutions.com or the main website at echoflexsolutions.com. If none of

these resources are sufficient, contact Technical Services directly at the office identified below.

When calling for help, take these steps first:

• Prepare a detailed description of the problem

• Go near the equipment for troubleshooting

• Find your notification number if you have called in previously

Technical Services

3031 Pleasant View Road

Middleton, WI 53562

800-775-4382 (USA, toll-free)

+1-608 831-4116

service@echoflexsolutions.com

Control Features 3

Control Features

Dim-to-Warm

Dim-to-Warm operates if at least one switch station is linked to the intensity channel and

nothing is linked to the color temperature channel. Color temperature moves according to the

change in light intensity. An increase in intensity also moves color temperature to cooler. A

decrease in intensity moves color temperature to warmer. Dim-to-warm mode operates with

occupancy sensors, daylight sensors, regular switches, and gateways linked to the intensity

channel.

Explicit Color Control

With a switch station linked to the color temperature channel, Explicit Color Control provides

manual control over a fixture's color temperature. By pressing the paddle on the station, you

can set a color level and modulate output as required. Press and hold ON increases color

temperature to cooler; Press and hold OFF decreases color temperature to warmer. A quick tap

on the button bumps color temperature up or down incrementally. A gateway command can

also be linked to the color temperature channel allowing other devices to control the fixture's

color temperature.

Automated Color Tuning

Automated Color Tuning requires a color temperature sensor like the Echoflex TAP-41 photo

sensor linked to the color temperature channel. The ELED2(H) compares its CCT set point to

the value from the space provided by the sensor and increases the fixture's color temperature

to the set point.

Example: The CCT set point is 3500 K and the sensor reports a value of 3200 K.

The controller will adjust the CCT output driving the fixture's output towards the

desired set point.

Automated Color Tuning can also use a dynamic CCT set point input linked to a gateway

command or outdoor color temperature sensor like the Echoflex FLS-41 sensor to set the

desired color temperature within the space and track outdoor color temperature values.

Characterized Color Tuning

Characterized Color Tuning modulates the color temperature channel based on the set point

value. As in the Automated Tuning Operation, a gateway command or outdoor color

temperature sensor can be linked to the CCT set point channel and the output will adjust to

this value based on the fixture's defined specifications. This operation does require the

fixture's characterized specifications for the 0–10 V channel be defined with the controller’s

configuration.

Example: A fixture is used that maps a range of 3200–6000 K across the 1–10 V

range. These values are pre-commissioned with the ELED2-BU or ELED2H-AU at the

factory. The color tunable output modulates based on the value provided by a linked

FLS-41 sensor on the set point value.

4 Tunable White Dimming Controller Configuration Guide

Configuration Options

The ELED2(H) is a complete stand-alone lighting controller requiring only remote linked

devices to provide input on light level, color temperature, occupancy state and switch

operation.

In addition to the tunable white color operations, the controller will perform the following

common lighting control applications:

• 0–10 V dimming of LED fixtures

• Vacancy Sensor Mode: partial OFF or fully OFF

• Occupancy Sensor Mode: partial ON or fully ON

• Wall Switch Station: ON/OFF, manual adjustment of dim level and timed switch

• Daylight Harvesting: open loop or closed loop

• Demand Response: sets a temporary hard limit to the maximum dimming output

• Scheduling via interfaces, timeclocks, or gateways

• Building Systems support with gateway commands

This document describes the controller’s features and explains how to use and configure them

with Simple Tap. Some features can only be configured using Garibaldi Pro software.

Note: For information about Garibaldi Pro software or pre-commissioning services

that provide complete system solutions (linked and configured), contact Echoflex.

Garibaldi Pro software is available for download from the Echoflex website at

echoflexsolutions.com.

Simple Tap Instructions

Simple Tap is a manual method of changing individual settings one at a time. There are no

tools required, simply use your finger to activate the sensors and standard switches linked to

the controller. The tap in Simple Tap means a quick press on a sensor's [Teach] button and/or a

switch’s ON/OFF.

Note: Echoflex scene stations cannot be used to configure settings with Simple Tap.

If the sensor is linked to multiple controllers and you do not want to make changes to all, turn

off the controllers lights/loads to ignore the Simple Tap changes.

Radio Communications

The ELED2(H) controller is equipped with a 902 MHz radio capable of transmitting and

receiving wireless messages. The controller supports single-hop and dual-hop message

repeating and controller status broadcast.

Repeater Function

The repeater function repeats received messages if:

• The message has not been repeated previously

• In the case of dual-hop repeating, the messages have been repeated previously only once

If single-hop or dual-hop repeating is needed, the repeater function can be enabled/disabled

using Simple Tap instructions.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ETC Controller Handbücher

ETC

ETC ION Bedienungsanleitung

ETC

ETC Echo Inspire Station Betriebsanleitung

ETC

ETC Foundation Rigging Controller Installations- und Betriebshandbuch

ETC

ETC EA07 Bedienungsanleitung

ETC

ETC Echoflex ELED1-BUN Bedienungsanleitung

ETC

ETC DMX DEBC-1 Bedienungsanleitung

ETC

ETC echoflex ElahoTouch Bedienungsanleitung

ETC

ETC ArcSystem Navis 100 Bedienungsanleitung

ETC

ETC Echoflex ELED1H Bedienungsanleitung

ETC

ETC Unison Foundry Bedienungsanleitung

ETC

ETC Unison Mosaic Bedienungsanleitung

ETC

ETC QuickTouch Preset Bedienungsanleitung

ETC

ETC echoflex ELEDR Bedienungsanleitung

ETC

ETC echoflex ELED2-BCL Bedienungsanleitung

ETC

ETC Unison Aero Bedienungsanleitung

ETC

ETC EchoDIN Power Control Processor Mk2 Bedienungsanleitung

ETC

ETC QuickTouch Preset Bedienungsanleitung

ETC

ETC ArcSystem Pro D4 Series Bedienungsanleitung

ETC

ETC Unison Aero Relay Controller Bedienungsanleitung

ETC

ETC echoflex ELED1 Bedienungsanleitung

ETC

ETC PENKO Flex Bedienungsanleitung

ETC

ETC echoflex ELEDR-RH Bedienungsanleitung

ETC

ETC QuickTouch Preset Handheld Bedienungsanleitung

ETC

ETC Echoflex Elaho Inspire Station Betriebsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch