EtherWAN EX63000 Series Bedienungsanleitung

EX63000

4/16/2018

W70G-EX630V2Q1

1 Unpacking

Unpack the items. Your package should include:

One EX63000 Series hardened managed switch

If items are missing or damaged, notify your

EtherWAN representative. Keep the carton and

packing material. The full product manual can be

downloaded from:

https://www.etherwan.com/support/product/ex6

3000-series

2 Equipment Needed

Appropriate cables for data ports

Personal computer or laptop

3 Select a Location

Installation: DIN rail, wall mount, rack, or

cabinet.

Identify a power source within 6 ft. (1.8m).

Choose a dry area with ambient temperature

between -10 and 60°C (14 and 140ºF).

Be sure there is adequate airflow.

Keep the switch at least 6 ft. (1.83m) away from

the nearest source of electromagnetic noise,

such as a photocopy machine.

Switch is designed for use in Pollution Degree 2

Environment.

4 Connect to the Data Ports

Depending on the model, your switch can have the

following ports:

16 10/100Base-TX ports

0 or 2 Gigabit ports

10/100Base-TX Ports

These ports come in 10/100Base-TX interfaces. They

can connect to devices such as an IP surveillance

camera or a Voice over Internet Protocol (VoIP)

phone.

Gigabit Ports

Some switch models have 10/100/1000Base-TX

ports with no Gigabit fiber ports, or combo

10/100/1000Base-TX with 1000Base-SX/LX/BX

ports. You can connect these ports to network

devices such as a computer, printer, network video

recorder (NVR), network storage, or they can

connect to the network itself.

Combo ports on the bottom face operate in

“either/or” fashion. This means that attaching to a 1

Gbps combo port renders the equivalent partner

combo port unavailable.

EX63000 Series Hardened Managed Switch

Installation Guide

Combo Ports

EX63000 Managed Switch Installation Guide

EX63000

4/16/2018

W70G-EX630V2Q1

5 Apply Power

The switch has a 12-48VDC terminal block. Only one

power input is required to operate the switch.

However, redundant power supply functionality is

supported.

Terminal Block

The switch provides two power inputs on a 12-

48VDC terminal block. Only one power input is

required to operate the switch. The terminal block

has 5 terminal posts.

Pin Description

Power 2 +12-48VDC

−Power Ground

Power 1 +12-48VDC

−Power Ground

Earth Ground

Relay Output Rating 0.6A @ 30VDC

Power-Up Sequence

When you apply power, all Link/ACT LEDs will light

up, and stay lit as the device boots up. When the

boot process is finished, only LEDS next to

connected ports will stay lit.

The Power 1/2 LEDs will light up to show the

connected power inputs.

Relay Output

The switch id equipped with a 3-point relay output.

Current is 30VCD / 0.6A

Relay Status

Normally closed

Normally Open

No Power

Closed

Open

Normal

Open

Closed

Abnormal

Closed

Open

6 Front Panel LEDs

LED Color Status

Power 1

Power 2 Green ON = power on.

OFF = power off.

10/100Base-TX LEDs

LED Color Status

Link/Act Green

ON = valid network connection is

established.

Flashing = port sending or receiving data.

10/100/1000Base-TX LEDs

Link/Act Green

ON = valid network connection is

established.

Flashing = port sending or receiving data.

1000Base-SX/LX/BX LEDs

Link/Act Orange

ON = valid network connection is

established.

Flashing = port sending or receiving data.

7 Managing the Switch

A. Connect a PC to an available switch port using

an appropriate cable.

B. Confirm that the Link/ACT LED for the switch

port to which the PC is connected is ON. If not,

choose a different port.

C. Configure the PC’s TCP/IP settings to use the

subnet 192.168.1.Xand subnet mask

255.255.255.0, where Xis a number from 2 to

254 other than 10.

D. In a Web browser address bar, type

http://192.168.1.10 and press Enter.

E. Log in to the management interface.

F. By default there is no password assigned to the

switch. To add a password:

- Click in the Password text box, enter a

password, and retype it in the Retype

Password text box.

- Click Update Setting below the Retype

Password text box.

Dieses Handbuch passt für folgende Modelle

Andere EtherWAN Schalten Handbücher

EtherWAN

EtherWAN EX17162 Bedienungsanleitung

EtherWAN

EtherWAN EX42000 Series Bedienungsanleitung

EtherWAN

EtherWAN ER59000 Series Bedienungsanleitung

EtherWAN

EtherWAN EX75000 Bedienungsanleitung

EtherWAN

EtherWAN EX29000 Bedienungsanleitung

EtherWAN

EtherWAN EX16926 Bedienungsanleitung

EtherWAN

EtherWAN EX78162 Series Bedienungsanleitung

EtherWAN

EtherWAN EX32905 Series Bedienungsanleitung

EtherWAN

EtherWAN EX17008A Bedienungsanleitung

EtherWAN

EtherWAN EX26262F Series Bedienungsanleitung

EtherWAN

EtherWAN EX26262F Series Bedienungsanleitung

EtherWAN

EtherWAN EX87000 Series Bedienungsanleitung

EtherWAN

EtherWAN EX72000 Bedienungsanleitung

EtherWAN

EtherWAN EX77000 Series Bedienungsanleitung

EtherWAN

EtherWAN EX75900 Series Bedienungsanleitung

EtherWAN

EtherWAN EX1624W Bedienungsanleitung

EtherWAN

EtherWAN EX83000 Bedienungsanleitung

EtherWAN

EtherWAN EX19164 Bedienungsanleitung

EtherWAN

EtherWAN EX17242 Bedienungsanleitung

EtherWAN

EtherWAN EX42395AT Bedienungsanleitung

EtherWAN

EtherWAN EX42008 Series Bedienungsanleitung

EtherWAN

EtherWAN EX73000 Series Bedienungsanleitung

EtherWAN

EtherWAN EX75900 Series Bedienungsanleitung

EtherWAN

EtherWAN EX32008 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung