EverFocus HDCCTV EZH5242 Bedienungsanleitung

Model No. EZH5242

1080p HDcctv IP66

IR Bullet Camera

User Manual

Please read this manual first to ensure correct installation and operation. This manual should be

retained for future reference. The information in this manual was current when published. The

manufacturer reserves the right to revise and improve its products. All specifications are

therefore subject to change without notice.

PRECAUTIONS

1. Do not install the camera near electric or magnetic fields.

Install the camera away from TV/radio transmitters, magnets, electric motors, transformers

and audio speakers, because the electromagnetic fields generated by these devices may

distort the video image or otherwise interfere with camera functions.

2. Never disassemble the camera beyond the recommendations in this manual, nor apply

materials to it other than those recommended herein.

Improper disassembly or introduction of corrosive materials may result in equipment failure

or other damage.

3. Try to avoid pointing the camera toward the sun.

In some circumstances, direct sunlight may cause permanent damage to the sensor and/or

internal circuits. It may also create unbalanced illumination that may be beyond the camera’s

ability to compensate.

4. Keep the power cable away from water and other liquids. Never touch the power cable

with wet hands.

Touching a wet power cable with your hands or touching the power cable with wet hands

may result in electric shock.

5. Never install the camera in areas exposed to oil, gas or solvents.

Oil, gas or solvents may cause equipment failure, electric shock or, in extreme cases, fire.

6. Cleaning

For cameras with interchangeable lenses, do not touch the surface of the sensor directly

with your hands. Use lens tissue or a cotton tipped applicator and ethanol to clean the

sensor and the camera lens. Use a damp soft cloth to remove any dirt from the camera body.

Do not use complex solvents, or corrosive or abrasive agents to clean any part of the camera.

7. Do not operate the camera beyond the specified temperature, humidity and power source

levels. This camera is suitable for indoor and outdoor operation only.

Use the camera at temperatures between -40°C~50°C (-40°F~122°F) in an IP66 complaint

environment.This device is not rated as submersible. The input power source should be

12VDC or 24VAC. The use of a properly fused or “Class 2 Limited Power Source” power

supply is highly recommended.

8. Mounting

Select a solid mounting surface that will support the weight of the camera and any

additional loading from wind, snow, ice or other factors. Securely attach the camera to the

mounting surface using screws and anchors that will properly support the camera. If

necessary, (e.g. when mounting the camera to a drop ceiling, or unsupported ceiling) use a

safety wire to provide additional support for the camera.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one of the

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

This Product is RoHS compliant.

ATTENTION! This is a class A product which may cause radio interference in a domestic

environment; in this case, the user may be urged to take adequate measures.

WEEE

Your EverFocus product is designed and manufactured with high quality materials and

components which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of-life, should

be disposed of separately from your household waste.

Please, dispose of this equipment at your local community waste collection/recycling

centre.

In the European Union there are separate collection systems for used electrical and

electronic product.

Please, help us to conserve the environment we live in!

TABLE OF CONTENTS

1. INTRODUCTION..........................................................................................................................1

1.1FEATURES......................................................................................................................................... 2

1.2PACKAGE CONTENTS........................................................................................................................ 2

1.3SPECIFICATIONS ............................................................................................................................... 3

2. CAMERA OVERVIEW ...................................................................................................................5

2.1 DIMENSIONS ................................................................................................................................... 5

2.2 NAMES AND FUNCTIONS OF PARTS.................................................................................................5

3. INSTALLATION ............................................................................................................................6

3.1 WIRING AND MOUNTING ...............................................................................................................6

3.2ADJUSTING THE CAMERA ................................................................................................................8

4. CAMERA SETUP ........................................................................................................................10

4.1 CONTROL STICK MOVEMENTS ......................................................................................................10

4.2 OSD OPERATION............................................................................................................................ 11

5. CONFIGURATION WITH THE OSD...............................................................................................12

5.1 LENS .............................................................................................................................................. 12

5.2 EXPOSURE .....................................................................................................................................12

5.3 WHITE BALANCE............................................................................................................................14

5.4 DAY &NIGHT ................................................................................................................................. 15

5.5 NR –NOISE REDUCTION ................................................................................................................ 16

5.6 SPECIAL .........................................................................................................................................17

5.7ADJUST .......................................................................................................................................... 19

5.8RESET............................................................................................................................................. 19

5.9 EXIT ............................................................................................................................................... 19

1. INTRODUCTION

The EZH5242 is an HDcctv outdoor IR bullet camera with true Day/Night capability in an IP66

vandal resistant housing. Based on a 1/3” Panasonic 2.1 megapixel progressive scan sensor and

2.8~10mm varifocal megapixel lens for HD 1080p resolution 100% digital images, it delivers

vastly superior video quality compared to traditional CCTV images. This superior resolution not

only captures more critical evidentiary information, but the inherent ability for megapixel

video also extends the area of coverage, expedites completion of investigations, resolves

complaints and reduces both capital and operational costs. Designed with 44 long lifespan IR

LEDs, the EZH5242 can capture images at up to 84m /275 feet in low or no light environments.

This highly advanced imaging system also incorporates the following state of the art optical

enhancement technologies:

•EverFocus Tone Reproduction (ETR):Electronically balances lighting in challenging or

unbalanced lighting conditions.

•Lens Shading Compensation (LSC): Compensates to eliminate artificial shadows caused by

attenuation of light as it traverses the outer portions of the lens.

•EverFocus Enhanced Contrast Technology (EFECT): Dramatically improves imaging in

reduced visibility conditions, cutting through smoke and fog that would blind other camera

systems.

•Polestar SENS-UP light low enhancement for full motion color in low light conditions

without ghosting combines with EverFocus Adaptive Luminance Compensated Optimized

Noise Reduction (EFALCONR)to maximize image luminance and clarity while conserving

DVR disk storage space.

•Digital zoom with electronic PTZ to fine tune field of view.

•Image flip and rotate.

No major upgrade to the IT network is required to deploy this powerful technology; HDcctv

cameras communicate at digital speeds up to 1.5Gb/s over existing or new coaxial cable (RG59

or other types for longer distances), using industry standard BNC connectors. With its 3-axis

positioning, varifocal 2.8~10mm megapixel auto iris lens, IP66 operation down to -40 degrees

and easy mounting to a 4” electrical box, 1” conduit or directly to any flat surface the EZH5242

delivers flexible, robust coverage in a wide range of demanding surveillance environments

while delivering stunning HD image quality.

1.1 FEATURES

•2.1 Megapixel 1920x1080p HDcctv HD video over coax for superlative image detail

•2.8~10mm AI VF megapixel lens plus optional electronic lens shading compensation captures

the desired field of view with uniform image illumination

•True Day / Night operation with 44 IR LEDs for effective range up to 84 m / ~ 275 ft

•Provides ICR / 2D & 3D DNR / EFALCONR/SENS-UP (up to 60x) to improve picture clarity in low

light scenes

•ETR (EverFocus Tone Reproduction) to deliver properly exposed images despite bright light

sources, deep shadows and/or unbalanced lighting in the same scene

•HSBLC/BLC with programmable zones aid in control of image exposure and contrast in the

presence of concentrated light sources such as automobile headlights or from deep shadows

surrounding objects of interest

•EFECT (EverFocus Enhanced Contrast Technology) delivers recognizable images despite

interference from fog or smoke

•Digital zoom increases effective lens magnification and includes PIP viewer for adjusting

electronic pan, tilt and zoom

•Up to 8 Privacy Zones programmable for size, location and color detection

•Dead pixel compensation for increased clarity and extended service life

•Easy to use OSD setup menu for digital signal processing feature control

•SD TV Out to aim and focus using a standard hand held test monitor

•Dual Voltage Power Source 12V DC / 24V AC

•Weather Resistant IP66 rated with performance in cold climates down to -40 degrees

1.2 PACKAGE CONTENTS

•1 x Camera Unit

•1 x Speedy Mount Ring

•1 x User Manual

•1 x Video Test Cable

•1 x Power Supply Pigtail

•1 x Mounting Kit

Mounting kit includes:

•4 x Long Screws (for attaching Speedy Mount Ring to mounting surface)

•4 x Short Screws (for connecting camera base to Speedy Mount Ring)

•4 x Expanding Anchors

•1 x 4 mm Hex key (for adjusting camera position)

•1 x 1.5 mm Hex key (for adjusting Sunshield and set screw in base)

•1x T10 Torx key (for adjusting Lock tab and lock tab screw)

•1 x Mounting Template

1.3 SPECIFICATIONS

Pickup Device 1/3” Panasonic 2.1 megapixel Color Progressive CMOS sensor

Image Pixels 1920 (H) x 1080 (V) with 2.75µ x 2.75µ pixel size

HDcctv Image Area Dimensions 5.28 mm (H) x 2.97 mm (W); ø 6.06 mm area diagonal

Sensitivity 0.4 lux / F=1.2; 0 lux (IR LED ON)

S/N Ratio Max. 50dB

Video Format Main Output HDcctv

Video Resolution NTSC 30 fps at 1920 x 1080p

PAL 25 fps at 1920 x 1080p

Main Output Connector BNC

Video Format Test Output NTSC / PAL selectable

Test Output Connector Pin header; adapter cable to BNC supplied

Lens Type DC Iris Megapixel Varifocal lens, f=2.8mm~10mm

IR LEDs 44 LEDs with wavelength of 850nm

IR Range Up to 84m / 275 feet (depends on scene IR reflectivity)

True Day/Night Control Yes (Auto IR cut filter removal)

OSD Menu Yes (controlled from 5-axis joystick control)

Electronic Shutter Auto / Manual selectable

Angle of View

Wide

Diagonal: 94.5°

Horizontal: 86.6°

Vertical: 55.9°

Narrow

Diagonal: 33.7°

Horizontal: 29.6°

Vertical: 16.9°

ETR (EverFocus Tone

Reproduction) Off / Low / Medium / High [Electronic Wide Dynamic Range]

Lens Shading Compensation Off / On

Back Light Compensation

(HSBLC=Highlight Suppression

Back Light Compensation)

Off / BLC / HSBLC

BLC (select areas from 8 x 15 grid)

HSBLC (4 zones programmable for size and location)

Auto Gain Control Low / Middle / High

Auto White Balance ATW / Push / Manual / Outdoor / Indoor

DNR

Common Level Adjust 0~100

2D DNR – Off / On; 3D DNR – Off / On

EFALCONR [EverFocus Adaptive Luminance Compensated

Optimized Noise Reduction] – Off / On

EFECT (EverFocus Enhanced

Contrast Technology)

Low / Middle / High

EFECT improves contrast in smoke, fog and similar conditions]

Digital Zoom 2X~64X with optional PIP mode

for ease of electronic pan / tilt alignment

Motion Identification On screen highlighting of changing areas

OSD Text Color Control Custom camer

a title; ability to change text display color and

turn black text outline off / on to contrast with scene

Image Flip Off/H Flip/V Flip/HV Flip (rotate 180°)

Programmable Privacy Zones 8 areas independently adjustable for size, location, color

OSD Text Language Selection English, Traditional Chinese , Simple Chinese, Japanese

Dead Pixel Compensation Dynamic Method Off / On / Auto;

Static Method Off / On; separate adjustable threshold levels

Polestar SENS-UP Low light boost 2X~60X (recommended no more th

an 8X

without careful consideration of application conditions)

Power Source & Consumption DC12V 650mA 7.8W (Max)

AC24V 430mA 10W (Max)

Dimensions

(In line) 359.9mm/14.17“ (L) x Φ105.5mm/Φ4.15“ Diameter (W)

(Right angle) 312.7mm/12.3“(L) x 145mm/5.7“(H) x

Φ105.5mm/Φ4.15“ Diameter (W)

Weight 1.5 kg / 3.31 lbs

Mounting

Speedy-

mount ring attaches easily to mounting surface and fits

4” electrical box pattern; camera base attaches to ring or can be

removed to fit 1” conduit thread.

Operating Environment -40°C~50°C / -40°F~122°F

Weather Resistant IP66 rated

Certifications FCC / CE

Sunshield & sunshield screw

Lock tab & lock tab screw

Front cover

2. CAMERA OVERVIEW

2.1 DIMENSIONS

2.2 NAMES AND FUNCTIONS OF PARTS

Unscrew the front cover of

the camera housing to reach

the control stick and the lens

adjustments.

Lens Adjustments

Focus lever (FAR-NEAR)

Zoom lever (WIDE –TELE)

Control Stick

Before unscrew the front cover,

please, remove t

he sunshield and

the lock tab.

Power Reset button

Speedy-mount ring

3. INSTALLATION

Steps:

1. Wire and mount the camera. See 3.1

2. Adjust the camera position. See 3.2

Warning

To prevent electrical shock, turn off the electrical power before making electrical connections.

3.1 WIRING AND MOUNTING

1. Use the template and an appropriate tool to drill 4 holes to attach the Speedy-mount ring.

(Note: If the wires from the camera will be routed on the surface, use a pliers or other suitable tool

to grasp the filler closing the surface wire slot and twist to remove the filler to open the wire slot.

If the wires will be routed through the rear of the camera leave the surface wire slot filler in place.)

2. Push the plastic anchors into the 4 holes.

3. Place the Speedy-mount ring against the anchoring surface so that the holes line up. Insert the four

long screws and tighten them firmly.

Andere Handbücher für HDCCTV EZH5242

Inhaltsverzeichnis

Andere EverFocus Sicherheitskamera Handbücher

EverFocus

EverFocus EHN3200 Bedienungsanleitung

EverFocus

EverFocus EAN3200 Bedienungsanleitung

EverFocus

EverFocus EZA2580 eZ.HD Series Bedienungsanleitung

EverFocus

EverFocus EQ650 Bedienungsanleitung

EverFocus

EverFocus Eq250 Bedienungsanleitung

EverFocus

EverFocus EMD935F Bedienungsanleitung

EverFocus

EverFocus NeVio EAN800A Bedienungsanleitung

EverFocus

EverFocus Speed Dome EPTZ1000 Bedienungsanleitung

EverFocus

EverFocus Speed Dome EPTZ1000 Bedienungsanleitung

EverFocus

EverFocus EDH5102 Bedienungsanleitung

EverFocus

EverFocus EHA1280 eZ.HD Series Bedienungsanleitung

EverFocus

EverFocus WDII EQ600 Bedienungsanleitung

EverFocus

EverFocus ED640 Betriebsanleitung

EverFocus

EverFocus 630 TVL Bedienungsanleitung

EverFocus

EverFocus EPN5230 Bedienungsanleitung

EverFocus

EverFocus ED300 Series Bedienungsanleitung

EverFocus

EverFocus M117-N701-001 Bedienungsanleitung

EverFocus

EverFocus Integrated Camera EI220 Bedienungsanleitung

EverFocus

EverFocus EZ655p Bedienungsanleitung

EverFocus

EverFocus Color Rugged Dome Camera EHD350 Bedienungsanleitung

EverFocus

EverFocus EHA2580 eZ.HD Series Bedienungsanleitung

EverFocus

EverFocus EZ180 Bedienungsanleitung

EverFocus

EverFocus EHA1280 eZ.HD Series Bedienungsanleitung

EverFocus

EverFocus EPN3600 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung