Evertz MAGNUM-ROUTER-SS Bedienungsanleitung

MAGNUM-ROUTER-SS

User Guide

EVERTZ MICROSYSTEMS LTD.

5288 John Lucas Drive,

Burlington, Ontario, Canada

L7L 5Z9

Phone: +1 905-335-3700

Sales Fax: +1 905-335-3573

Tech Support Phone: +1 905-335-7570

Tech Support Fax: +1 905-335-7571

Internet: Sales: sales@evertz.com

Tech Support: [email protected]

Web Page: http://www.evertz.com

Version 1.0 March 2012

The material contained in this manual consists of information that is the property of Evertz Microsystems and is

intended solely for the use of purchasers of the MAGNUM Server. Evertz Microsystems expressly prohibits the

use of this manual for any purpose other than the operation of the Servers.

Microsystems Ltd. Copies of this guide can be ordered from your Evertz products dealer or from Evertz

Microsystems.

MAGNUM-ROUTER-SS User Guide

Revision 1.0

REVISION HISTORY

REVISION DESCRIPTION DATE

1.0 First Release March 2012

Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof

nor for the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning

performance of Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The

only warranty offered by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order

confirmation form.

Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no

warranty is granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or

order confirmation. Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If

you encounter an error, please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make

changes in equipment design or specifications.

MAGNUM-ROUTER-SS User Guide

Revision 1.0

This page left intentionally blank

MAGNUM-ROUTER-SS User Guide

Revision 1.0

TABLE OF CONTENTS

1. CONFIGURING THE NETWORK SETTINGS.....................................................................1

2. CLUSTER CONFIGURATION.............................................................................................2

2.1. (HOST X) HOST NAME.........................................................................................................3

2.2. (HOST X) IP ADDRESS.........................................................................................................3

2.3. PREFERRED HOST..............................................................................................................4

2.4. CHANGE CLUSTER IP ADDRESS .......................................................................................4

3. UPGRADING.......................................................................................................................5

4. MAGNUM-ROUTER-SS LIMITS..........................................................................................6

Figures

Figure 2-1: Cluster Configuration...................................................................................................2

Figure 2-2: Change Host Setting...................................................................................................3

Figure 2-3: Host IP Address ..........................................................................................................3

Figure 2-4: Select Preferred Host..................................................................................................4

Figure 2-5: Change Cluster IP Address.........................................................................................4

Tables

Table 4-1: MAGNUM-ROUTER-SS Limits.....................................................................................6

MAGNUM-ROUTER-SS User Guide

Revision 1.0

This page left intentionally blank

MAGNUM-ROUTER-SS User Guide

Revision 1.0 Page 1

1. CONFIGURING THE NETWORK SETTINGS

The IP address of the MAGNUM-ROUTER-SS can be changed from the front panel of the unit. The

Network screen enables the user to configure the network settings for network ports A and B. The

following procedure outlines how to set an IP address:

1. To change the IP address, toggle to the appropriate number using the bottom left Select shaft

encoder. Turning the shaft encoder clockwise will enable the user to advance forward and

highlight the appropriate value. Turning the shaft encoder counter-clockwise will move the

selection tool backwards.

2. Once the desired value is highlighted (the text will be bright yellow), use the bottom right

Change shaft encoder to adjust the value of the selected number. Turning the shaft encoder

clockwise will increase the number value, while turning the shaft encoder counter-clockwise will

decrease the number value.

3. If you wish to apply your changed network settings, press the Apply option on the touch-

screen.

4. Bonding is not supported in MAGNUM-ROUTER-SS units.

MAGNUM-ROUTER-SS User Guide

Page 2Revision 1.0

2. CLUSTER CONFIGURATION

Once the network has been configured, the next step is to define the cluster setup. This information is

required whether there is only a single MAGNUM-ROUTER-SS or Main and Redundant MAGNUM-

ROUTER-SS. The cluster is configured by connecting to the MAGNUM-ROUTER-SS IP address using

a SSH session. A common program that can establish a SSH session is called Putty, other terminal

programs can be used as well. Once a SSH connection has been established to the MAGNUM-

ROUTER-SS, login using the account “admin” and the password “admin”. After a successful login, the

MAGNUM Server Control Console will be displayed. This console presents the user with a number of

operations that can be performed in order to properly set up your server. The Cluster Configuration

menu, as illustrated in Figure 2-1, enables the user to set the cluster information for primary and/or

redundant MAGNUM-ROUTER-SS. (Host names and IP addresses, preferred hosts and cluster IP

addresses).

Figure 2-1: Cluster Configuration



For more information concerning the MAGNUM Server Control Console, please

refer to the MAGNUM Manual.

MAGNUM-ROUTER-SS User Guide

Revision 1.0 Page 3

2.1. (HOST X) HOST NAME

To assign a host name to the primary host (Host 1), select the (host 1) Host Name option from the

Cluster Configuration menu. The dialog box in Figure 2-2 will appear when this option is selected.

Enter the primary host name into the “Enter host name” field and then select the OK button.

Figure 2-2: Change Host Setting

To assign a host name to the redundant server if applicable, select the (host 2) Host Name option and

enter the desired redundant server name into the “Enter host name” field and then select the OK

button.

2.2. (HOST X) IP ADDRESS

To assign a host IP address to the primary server, select the (host 1) IP Address option from the

Cluster Configuration menu. The dialog box in Figure 2-3 will appear when this option is selected.

Enter the desired host IP address into the “Enter (host name)’s IP address” field and then select the

OK button. This IP address should be the IP that was assigned in Section 1.

Figure 2-3: Host IP Address

If you wish to assign an IP address to the redundant server, select the (host 2) IP Address option and

enter the desired redundant server IP into the “Enter (host name)’s IP address” field and then select

the OK button.

MAGNUM-ROUTER-SS User Guide

Page 4Revision 1.0

2.3. PREFERRED HOST

The Preferred Host field will display the name of the primary server. If there is more than one server

available, the user can select the server that they wish to assign as the preferred, primary server.

A Preferred Host dialog will appear (as shown in Figure 2-4) enabling the user to select a preferred

host from the list of servers available. Toggle to the host in the list that you wish to make the primary

server and select it by pressing space key; then select the OK button while done. The selected server

will be set as the primary server. A preferred host is the server that will be made active if both primary

and secondary servers are brought online at the same time. This requires the cluster is configured

correctly and communication links between both servers are functioning correctly.

Figure 2-4: Select Preferred Host

2.4. CHANGE CLUSTER IP ADDRESS

To change the cluster IP address, select the Cluster IP Address option from the Cluster

Configuration menu. The dialog box in Figure 2-5 will appear when this option is selected. If the user

wishes to change the cluster IP address, enter a new IP address into the “Enter the Cluster IP address”

field and then select the OK button. The cluster IP address is the IP address assigned to the Active

MAGNUM server so that all clients have a single address connected to them regardless of which

MAGNUM Server is Active. This is the IP address you will use to access the WEB Configuration Tool,

and which will be manually programmed into any advanced panels for MAGNUM-SERVER

connectivity.

Figure 2-5: Change Cluster IP Address

Inhaltsverzeichnis

Andere evertz Netzwerk-Hardware Handbücher

evertz

evertz 9525DSK Bedienungsanleitung

evertz

evertz MAGNUM Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz 7700 7780ASI-IP2 Bedienungsanleitung

evertz

evertz 8150 Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz 5700ACO Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz MetaCast 2 Bedienungsanleitung

evertz

evertz 9580 Bedienungsanleitung

evertz

evertz 8010TM Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz TR-3200E Bedienungsanleitung

evertz

evertz 5601MSC Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

evertz

evertz EMR-TDM16-DLY Bedienungsanleitung

evertz

evertz TR-4800E Bedienungsanleitung

evertz

evertz Quartz D9 Montage- und Bedienungsanleitung

evertz

evertz EQX Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung

Cantek

Cantek NR310-4 Bedienungsanleitung

evertz MAGNUM-ROUTER-SS Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken