evodesk PRO Beilage
POWER ADJUSTABLE DESK
ASSEMBLY & OPERATION MANUAL
ED51115-SM90.014.01.0280v.A
Caution, Use & Liability.................................................................................. Page 1
Parts & Components....................................................................................... Page 2
Components Diagram ................................................................................... Page 3
Assembly Instructions .................................................................................. Page 4
Troubleshooting .......................................................................................... Page 15
Technical Specifications............................................................................... Page 15
Warranty........................................................................................................... Page 16
TABLE OF CONTENTS
PREFACE
Thank you for choosing Evodesk!
We appreciate the trust and confidence you have placed in our
company. We are committed to providing you the best possible
value in power adjustable desks. We are sure that your Evodesk
will provide you many years of enjoyment and health.
-Evodesk Team
Preface, Table of Contents
CAUTION
Make sure no obstacles are in the desk’s
path. Make sure the desktop is not
touching any walls. Make sure all cords
are appropriate length to accommodate
the change in height.
WARNING! PINCH POINT
Keep hands and fingers clear
Keep children away from electric height-adjustable desks, control
units and handsets. There is a risk of injury and electric shock.
Keep all electrical components away from liquids.
Do not sit or stand on the desk frame.
Do not crawl or lie under the desk frame.
Do not place any objects taller than 20” underneath the desk.
Do not open any of the components - the Legs, Control Box, or
Controller. There is a risk of electric shock.
The product is designed with a duty cycle of 10%
(2 min. on, 18 min. off).
In the event of a power outage or if the power cord is unplugged,
a manual reset may be necessary - see step 21.
USE & LIABILITY
This height adjustable desk has electric motors and is designed for use in dry
work areas only. The desk height is adjustable so that it can be positioned at
the most ergonomically suitable height. Any other use is at user’s risk. Under
no circumstances does the manufacturer accept warranty claims or liability
claims for damages caused from improper use or handling of the desk frame.
IMPORTANT:
Please read this manual carefully.
If this desk is sold, please provide this manual to the buyer.
Caution, Use & Liability - 1
PARTS & COMPONENTS
TOOLS REQUIRED
COMPONENTS INCLUDED
Parts & Components - 2
4mm Allen Wrench (included) Phillips Head Screwdriver Tape Measure
HARDWARE INCLUDED
HARDWARE INCLUDED WITH DESKTOP
x4 x2 x2 x2 x2
x2 x1 x1 x2 x4
Columns Feet Upper Frame Center Rails Upper Brackets
Control Box Controller(s) Power Cord Lift Cables
(51”)
Leveling Studs
x16 x32 x2 x15
Machine Screws
M6x14
Machine Screws
M6x10
Wood Screws
ST M5x16
Cable Clips
x1
Link Cable
Phillips Screws
10-24 x ½”
x8
COMPONENTS DIAGRAM
Components Diagram - 3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Columns
Feet
Upper Frame
Center Rails
Upper Brackets
Control Box A
Control Box B
Controller
Power Cord
Lift Cables
Leveling Studs (pre-installed)
Machine Screws: M6x14
Machine Screws: M6x10
Phillips Screws:10-24 x ½”
Wood Screws: ST M5x16
Cable Clips
Link Cable
2
2
2
2
2
1
1
1
1
2
4
16
32
8
2
10
1
No. Description Qty
(Shipped separately in box with Evodesk desktop if purchased)
1
2
5
4
3
6
9
11
16
8
10 15
13
14
13
12
7
17
A
B
ASSEMBLY INSTRUCTIONS
BEFORE YOU BEGIN Lay out all components and hardware to
ensure that you have all the parts listed on the parts page.
STEP 1
Lay the frame with the Rubber Pads facing down.
Insert a column into one of the openings as shown.
Assembly Instructions - 4
STEP 2
Use four of the M6-10mm screws to secure the
Columns to the Upper Frame. Do not fully
tighten the screws at this time. Column should
have some “wiggle room”.
ASSEMBLY INSTRUCTIONS cont.
STEP 4
Attach one of the feet to the ends of the Columns
using eight of the M6-14mm screws.
STEP 3
Repeat for the other opening on the Upper Frame.
Assembly Instructions cont. - 5
ASSEMBLY INSTRUCTIONS cont.
Assembly Instructions cont. - 6
STEP 6
Align the hole furthest from the columns with the steel insert
on the desktop. Attach with one of the 10-24 screws included
with the desktop. Do not tighten these yet. Screw should only
be in 75% of the way in at this time.
*Align with desk insert
STEP 5
Repeat Steps 1 through 6 to complete the
second column group.
ASSEMBLY INSTRUCTIONS cont.
Assembly Instructions cont. - 7
STEP 7
Align the Upper Bracket with the Upper Frame as shown. Use
three 10-24 screws included with the desktop. These should
also only be screwed in 75% of the way.
ASSEMBLY INSTRUCTIONS cont.
Assembly Instructions cont. - 8
STEP 8
Secure the Upper Bracket to the Upper Frame using four of the
M6-10 screws. Firmly tighten after all four have been started.
STEP 9
Slide in both Center Rails into the openings of the
Upper Frame as shown.
Inhaltsverzeichnis
Andere evodesk Inneneinrichtung Handbücher
Beliebte Inneneinrichtung Handbücher anderer Marken
Homelegance
Homelegance California 1662PEK-1CK Bedienungsanleitung
Osmond Ergonomics
Osmond Ergonomics FLO Bedienungsanleitung
OVE
OVE ELOISE 42 Bedienungsanleitung
overstock
overstock MF286255 Bedienungsanleitung
Sonoma
Sonoma 160-801 Bedienungsanleitung
BOLERO
BOLERO Wicker Side Chair CF158 Installationsanleitung
