Evopower EPW3100-2 Bedienungsanleitung
INSTRUCTIONS FOR
7.0HP & 14.0HP Petrol
Pressure Washers
Model #s: EPW3100-2, EPW185-70AR & EPW275-14AR
PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE
OF THIS PRODUCT.
GENERAL INFORMATION
This manual has been compiled by Genpower Ltd and should be read carefully before operation of your Evopower pressure washer in order to ensure its safe
and correct use. This manual should also be kept safe for future reference. This manual contains information including general safety instructions, how
to assemble the machine and its operation and usage. Whilst every effort has been made to ensure all information supplied in this manual is accurate,
modifications may be made without prior warning.
*EPW185-70AR / EPW275-14AR
2
CONTENTS
Contents/Guarantee..............................................................................................2
Specification.......................................................................................................3-4
General Safety Instructions....................................................................................5
Getting to Know Your Pressure Washer.................................................................6
Assembly...........................................................................................................7-10
Operation and Use..........................................................................................11-19
Maintenance...................................................................................................20-23
Troubleshooting..............................................................................................23-24
Declaration of Conformity....................................................................................25
Contact.................................................................................................................26
GUARANTEE
All Evopower products are carefully checked and tested before being dispatched to the customer to ensure
any problems that may occur are kept to an absolute minimum.
The Evopower pressure washers come with a one year return-to-base guarantee and a two year return-to-
base guarantee on the engine.
However, if we receive any machines back with a non-warranty fault the customer will be charged for
carriage both ways, labour and any parts used. To try and minimise the chances of this happening, please
call and speak to one of our technicians before sending the machine back.
Carbon monoxide.
Carbon monoxide is a colourless and odourless gas. Inhaling this gas can cause death as well as
serious long term health problems such as brain damage.
The symptoms of carbon monoxide poisoning can include but are not limited to the following;
Headaches, dizziness, nausea, breathlessness, collapsing or loss of consciousness.
Carbon monoxide poisoning symptoms are similar to flu, food poisoning, viral infections and
simply tiredness. It is quite common for people to mistake this very dangerous poisoning for
something else.
To avoid carbon monoxide poisoning DO NOT use Petrol/Diesel- powered equipment inside any
of the following;
Home, garage, tent, camper van, mobile home, caravan or boat.
This list is not exhaustive and if you are in any doubt contact your dealer.
If you think you have or someone around you has been affected by carbon monoxide poisoning;
Get them fresh air immediately, by leaving the affected area or by opening doors and windows.
If safe and practical to do so make sure that the machine is turned off. DO NOT enter a room
you suspect of having carbon monoxide present – instead call the emergency services.
Contact a doctor immediately or go to hospital - let them know that you suspect carbon
monoxide poisoning.
DO NOT use in an enclosed area or a moving vehicle.
Rev 2
3
SPECIFICATION - EPW3100-2
Part No...................................................................................................EPW3100-2
Engine......................................................................................7.0HP OHV 4-Stroke
Starting Method.......................................................Recoil Start with CDI Ignition
Capacity........................................................................................................212cc
Machine is marked with a 210cc label the cc has just been rounded down.
Max Pressure.................................................................................210bar, 3045psi
Rated Pressure...............................................................................185bar, 2685psi
Litres/Hour.........................................................................................................410
Noise.....................................................................................................70db@7m
Wheels.........................................................Heavy duty single piece wide wheels
Pump....................................................................................BE RX710 Axial Pump
Dimensions...........................................H500mm x W540mm x L570mm (Folded)
Ceramic Pistons................................................................................................Yes
Brass Pump Head..............................................................................................Yes
Thermal Relief Valve.........................................................................................Yes
Adjustable Pressure..........................................................................................Yes
Low Oil Shutdown.............................................................................................Yes
Please ensure that approved eye, ear and foot protection are worn at all times when
machine is in operation.
Rev 2
4
SPECIFICATION - EPW185-70AR
Part No............................................................................................EPW185-70AR
Engine......................................................................................7.0HP OHV 4-Stroke
Starting Method.......................................................Recoil Start with CDI Ignition
Capacity........................................................................................................212cc
Max Pressure................................................................................185bar, 2685psi
Rated Pressure.............................................................................175bar, 2540psi
Litres/Hour.................................................................................................600l/hr
Noise.....................................................................................................70db@7m
Wheels.........................................................Heavy duty single piece wide wheels
Pump.....................................Annovi Reverberi Italian Commercial Triplex Pump
Dimensions.........................................................H940mm x W535mm x L770mm
Ceramic Pistons................................................................................................Yes
Brass Pump Head..............................................................................................Yes
Thermal Relief Valve.........................................................................................Yes
Adjustable Pressure..........................................................................................Yes
Low Oil Shutdown.............................................................................................Yes
Please ensure that approved eye, ear and foot protection are worn at all times when
machine is in operation.
Rev 2
5
SPECIFICATION - EPW275-14AR
Part No............................................................................................EPW275-14AR
Engine.......................................................................14.0HP Loncin OHV 4-Stroke
Starting Method.......................................................Recoil Start with CDI Ignition
Capacity........................................................................................................420cc
Max Pressure................................................................................275bar, 3988psi
Rated Pressure.............................................................................265bar, 3840psi
Litres/Hour.................................................................................................900l/hr
Noise.....................................................................................................70db@7m
Wheels.........................................................Heavy duty single piece wide wheels
Pump.....................................Annovi Reverberi Italian Commercial Triplex Pump
Dimensions.......................................................H1040mm x W595mm x L820mm
Ceramic Pistons................................................................................................Yes
Brass Pump Head..............................................................................................Yes
Thermal Relief Valve.........................................................................................Yes
Adjustable Pressure..........................................................................................Yes
Low Oil Shutdown.............................................................................................Yes
Please ensure that approved eye, ear and foot protection are worn at all times when
machine is in operation.
Rev 2
6
General Safety Instructions
-Please ensure that user instructions have been read carefully
before using the machine to ensure its safe and correct usage.
-The pressure washer has been designed for outdoor use only.
When using outdoors ensure all bystanders are at a safe
distance away to avoid injury.
-Before carrying out any maintenance, adjustments or cleaning
of the Pressure Washer, ensure that the machine is
completely switched off and the engine is cool. Also ensure
that the engine and water supply is turned off after each task.
-This pressure washer has been designed for use with specific
detergents such as neutral shampoo based on biodegradable
anionic surface active detergents. Please check before using
other detergents of chemicals as they may cause damage to
the appliance.
-Take care when using on mechanical parts that contain grease
as it will dissolve and can spread over the ground surrounding
the appliance. To avoid this happening, do not direct the
nozzle towards these parts.
-Ensure a minimum distance of 50cm is kept when cleaning
vehicle tyres due to the high pressure of the machine.
-For safety reasons, do not point the high pressure jets at
animals, people, live electrical parts or the appliance itself.
-Only use accessories such as high pressure hoses and
connections specified by the manufacturer.
-To avoid causing injury or damage to property, do not operate
the appliance until the nozzle is installed securely as high
pressure can cause water to be fired from the lance with
extreme force.
-Coverings such as paint and other surface treatment may be
removed if a high pressure jet is used. Damage may also be
caused to tarmac and grouting between paving slabs.
-Ensure that the machine is switched off completely when
unattended.
-Although the high pressure hose has been manufactured to
withstand high pressures, damage may be caused if used
incorrectly.
-Ensure that the machine is not used by children, persons with
reduced physical, sensory or mental capabilities or those who
lack the experience or knowledge to use the machine safely
and carefully.
-Before using the pressure washer ensure that the high
pressure hose has been unwound completely. Before
unwinding the hose, ensure the machine is switched off
completely.
-Ensure that any exhaust emissions are not in the
vicinity of air intakes. The exhaust fumes from petrol
engines contain harmful and hazardous amounts of
Carbon Monoxide, an odourless gas that can kill in
minutes in a poorly ventilated area.
MAINTENANCE
-Never attempt to modify your pressure washer in any
way.
-To keep your pressure washer in working order, ensure
that it is serviced regularly by an authorised service
agent.
-Only use parts in your machine specified by the
manufacturer.
-Use only high quality, clean, fresh oil in your machine
and never use the machine without oil.
-Never refuel your machine near sources of ignition
such as naked flames or sparks.
-Allow engine to cool before refuelling.
-If a spillage occurs, wipe up immediately.
-Ensure a safe distance is kept from the refuelling area
when restarting the engine.
-Ensure fuel is stored for a short time only and is stored
in the correct container away from direct sunlight and
heat.
-Clean the pressure washer thoroughly after each use
and regularly check external nuts and fixings to ensure
they are tight.
Rev 2
7
Getting to know your Petrol Pressure Washer
1: Engine
2: Pump
3:Removable Handle
4: Lower Frame
5: Wheels
6: Engine Recoil Start
7: Fuel Tank
8: Air Filter
9: Exhaust Silencer
10: Trigger Gun
11: Lance
12: Quick Release Nozzles
13: High Pressure Hose
14: Pump Outlet High Pressure Fitting
15: Pump Inlet Quick Release Fitting
16: Thermal Relief Valve
17: Engine Oil Filler Cap
18: Pump Oil Filler Cap
19: Suction Hose
UNPACKING: Ensure that all parts of the machine are in perfect condition before using the machine.
If in any doubt please give the manufacturer a call before using item.
Rev 2
8
Fig 1.
Fig 2.
Fig 3.
Fig 4.
ASSEMBLY
NOTE: There may be a little bit of water
inside the pump assembly due to testing at
the factory.
-LOCATING THE UPPER FRAME (Figs 1-3)
Slide the upper frame over the corresponding uprights of the
lower frame (Fig 1) and secure with the bolts provided.
Secure the hose and lance holders onto the upper frame by
using the nuts and bolts provided. (Fig 2 & 3)
-TO ASSEMBLE THE RUBBER FEET (Fig 4)
To assemble the rubber feet, pass the bolt provided through
the foot and lower bracket located on the base of the machine
and secure in place with washer and nut.
Rev 2
9
Fig 5.
Fig 6.
Fig 7.
Fig 8.
ASSEMBLY
- FITTING THE HOSE CONNECTOR ONTO THE
WATER INLET (Fig 5)
In order for a garden hose to be connected easily,
screw the quick release hose connector onto the
thread of the water inlet connector and tigthten
then push the female garden hose connector firmly in
place.
- ENGINE OIL (Fig 6-7)
WARNING:
BEFORE staring the machine, the engine must be
filled with clean, high quality oil. Use SAE15
W40 petrol engine oil in both the pump and the
engine. This is not supplied with the machine.
Ensure that the oil is filled to the top of the filler
neck and then replace the oil filler cap.
For the high pressure pump (Not on the
EPW3100-2), fill through the pump oil filler plug
(Fig 8A.) to halfway up the pump body using
the oil level gauge (Fig 8B.) as a reference.
Use SAE15 W40 oil for this process.
NOTE:
For important environmental reasons, do not deposit
oil containers in the bin or in the ground. Instead
take to recycling station where itcanbe sorted properly.
Rev 2
10
Fig 9.
Fig 10.
Fig 11.
Fig 12.
-HIGH PRESSURE CONNECTION (Figs 9-14)
Connect the high pressure hose to the high pressure outlet.
(Fig 9.)
Assemble the trigger gun and lance. Next, connect the high
pressure hose to the trigger gun. (Fig 10.)
-INSERTING A NOZZLE:
Pull back the locking collar, found at the end of the lance,
insert the nozzle and release the collar. This will lock the
nozzle firmly in place. (Fig 10.)
To prevent injury to yourself or others, ensure that the
nozzle is fitted correctly so it does not come lose and fly off
during use.
Connect the supply hose to the units water inlet connector
and turn the water on fully. (Fig 11.)
Rev 2
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Evopower Hochdruckreiniger Handbücher
