Excalibur KE-170 Kurzanleitung

This product is designed for professional installation only!

KE-170

DELUXE KEYLESS ENTRY SYSTEM

OWNER’S & INSTALLATION MANUAL

(production manual has full color cover)

Table Of Contents

Table Of Contents....................................................................................2

System Overview.....................................................................................3

The 1-Way Transmitter ........................................................................4

Transmitter Functions Reference Guide..................................................4

Using The Status Light/Valet Button .......................................................8

The Status Light ....................................................................................10

Visual Conrmations..............................................................................11

Audible Conrmations ...........................................................................11

Starter Interrupt - OPTIONAL................................................................12

Programmable Features........................................................................13

Changing The Programmable Features ................................................17

Full System Reset..............................................................................18

Programming Transmitters ....................................................................18

Ordering Replacement Transmitters..................................................19

Installation Considerations ....................................................................20

Mounting components........................................................................20

Wiring Connections ...............................................................................21

Main 12 pin harness...........................................................................21

Door Lock Connections......................................................................23

Driver’s Door Priority Connection ......................................................27

KE-170 Wiring Overview .......................................................................29

Programmable Features List .................................................................30

System Overview

The 2 system components used to control and monitor this system:

The Transmitter: Each system comes with 2 pre-learned transmitters.

This system can be operated by up to 4 different transmitters. Each transmitter

is embedded with a unique security code and can only operate one system at

a time. It has 4 buttons: a “LOCK” button, an “UNLOCK” button, a “TRUNK”

button, and a “3RD CH BUTTON” button which operates an additional output or

can be congured to activate PANIC mode.

The Status Light/Valet Button: This button can be used to temporarily

turn “off” certain automatic locking, anti-carjacking, and optional starter interrupt

operations of the system, should they be programmed to operate, by placing

the system into “Valet Mode”. If the optional starter interrupt is installed, the

Status Light/Valet Button can also be used, in conjunction with the vehicle’s

ignition key, to perform a “System Override”, allowing you to start the engine,

should the transmitter not be available. The Status Light/Valet Button is also

used to program features and transmitters.

The Status Light shows the status of the system at a glance, and its

presence offers a visual deterrent to break-ins and theft.

The Status Light’s operation is described on pages 10-11.

Transmitter Overview

Transmitter Functions Reference Guide

LOCK: Press and release the “LOCK” button.

• THE HORN WILL HONK ONCE

• THE LIGHTS WILL FLASH ONCE

• THE DOORS WILL LOCK

• THE OPTIONAL STARTER INTERRUPT WILL ARM

Battery: 2 x CR2016

Frequency: 433MHz

Call your dealer or visit

www.caralarm.com to

order replacement transmitters.

Transmitter battery replacement:

Remove the small screw from

the lower back case, and separate

the transmitter halves. Replace the

batteries and reassemble the

transmitter case.

THE 1-WAY TRANSMITTERS

Transmitter battery replacement:

the transmitter halves. Replace the

“lock”

button

“unlock”

button

“trunk”

button

“3rd Ch”

button

“unlock”

button

P/N: 4422-03EB P/N: 4410-07B

UNLOCK: Press and release the “UNLOCK” button.

• THE HORN WILL HONK TWICE

• THE LIGHTS WILL FLASH TWICE THEN TURN ON

• THE DOORS WILL UNLOCK*

• THE OPTIONAL STARTER INTERRUPT WILL

DISARM

* IF THE SYSTEM IS CONFIGURED FOR DRIVER’S PRIORITY, ONLY THE

DRIVER’S DOOR WILL UNLOCK. PRESS A 2ND TIME TO UNLOCK THE

OTHER DOORS.

TRUNK RELEASE: Press and hold the “TRUNK” button for 3 seconds.

• THE HORN WILL HONK TWICE

• THE TRUNK WILL OPEN (IF CONNECTED)

• THE LIGHTS WILL FLASH TWICE THEN TURN ON

• THE DOORS WILL UNLOCK

• THE OPTIONAL STARTER INTERRUPT WILL

DISARM

ACTIVATE 3RD CHANNEL: Press and hold the “3RD CH” button for 3 sec-

onds. • THERE IS NO VISUAL OR AUDIBLE INDICATION

FROM THIS SYSTEM. IF CONNECTED TO AN

OPTIONAL ACCESSORY, THAT ACCESSORY MAY

PROVIDE VISUAL/AUDIBLE CONFIRMATION UPON

ACTIVATION.

Transmitter Functions Reference Guide (cont’d)

PANIC: Press and hold the “LOCK” or “UNLOCK” button for 3 seconds.

• THE DOORS WILL LOCK OR UNLOCK

• THE HORN WILL HONK CONTINUOUSLY

• THE LIGHTS WILL FLASH CONTINUOUSLY

- OR -

ACTIVATE 4TH CHANNEL: Press and release the “LOCK” & “UNLOCK”

buttons simultaneously. Consult your installer about this optional feature.

buttons simultaneously.

Consult your installer about this optional feature.

• THERE IS NO VISUAL OR AUDIBLE INDICATION

FROM THIS SYSTEM. IF CONNECTED TO AN

OPTIONAL ACCESSORY, THAT ACCESSORY MAY

PROVIDE VISUAL/AUDIBLE CONFIRMATION WHEN

ACTIVATED.

ACTIVATE 5TH CHANNEL: Press and release the “TRUNK” & “3RD CH” but-

tons simultaneously. Consult your installer about this optional feature.

• THERE IS NO VISUAL OR AUDIBLE INDICATION

FROM THIS SYSTEM. IF CONNECTED TO AN

OPTIONAL ACCESSORY, THAT ACCESSORY MAY

PROVIDE VISUAL/AUDIBLE CONFIRMATION WHEN

ACTIVATED.

ACTIVATE REMOTE ANTI-CARJACK: While the ignition is ON, press and

hold the “3RD CH” button for 3 seconds.

See programmable feature #10 about enabling this feature

• THE ANTI-CARJACK FEATURE WILL ACTIVATE. SEE

PAGE 16 FOR MORE INFORMATION.

Using The Status Light/Valet Button

The Status Light/Valet Button can be used to place the system into

Valet Mode, which is used to stop or interrupt any automatic system func-

tions which may be programmed to operate. The Status Light/Valet Button, in

conjunction with your ignition key, also permits System Override, which allows

starting the vehicle if the optional starter interrupt is installed, and the transmit-

ter becomes lost or damaged.

Valet Mode: You may activate the Valet Mode at any time by pressing

and holding the Status Light/Valet Button for 3 seconds, unless the doors have

been locked by the transmitter (in which case the Status Light will be ashing

slowly). When the system enters Valet Mode, the Status Light will stay on. If

the KE-170 is installed with audible conrmation, the system will chirp twice

when it enters Valet Mode. Remember to check the Status Light - if it is not

illuminated or ashing fast, the system may be placed into Valet Mode. If the

Status Light is on steady, the system is already in Valet Mode. If it’s ashing

slowly, a System Override must rst be performed (see next page).

If the audible conrmation is connected, every time the ignition switch

is turned “off”, the system will chirp once as a reminder of this condition. Also,

the transmitter will operate normally while the system is in Valet Mode, i.e., it

will still lock and unlock the doors, and the transmitter’s “TRUNK” and “3RD

CH“ buttons will still operate - but the optional Starter Interrupt will not operate,

and any programmed automatic functions are suspended.

To exit Valet Mode simply press and release the Status Light/Valet

Button at any time; the Status Light will turn off.

System Override: If the last system operation was locking the doors

by the transmitter, a System Override is required before placing the system into

Valet Mode, or starting the engine if the optional Starter Interrupt is installed.

To obtain a System Override:

Step 1 Enter the vehicle normally.

Step 2 Using your key, turn the ignition “ON” (do not start).

Step 3 Within 5 seconds, press and release the Status Light/Valet Button once.

The Status Light will stop ashing.

1 2 3

The Status Light

The KE-170’s Status Light/Valet Button is a combined Valet/Override

button & Status Light to inform you of the system’s operational condition. If

your system includes a Starter Interrupt circuit, it’s condition is also reected in

this light’s operation, along with any automatic features which may have been

programmed to operate.

Light Off - Ignition switch is “on” OR the system is “at rest”, or standby, await-

ing a transmitter command, and is also indicating that no automatic functions

are occurring or will occur.

Light On - The system is in “Valet Mode”.

Light Flashing Rapidly - An automatic function, such as automatic locking or

automatic starter interrupt, is in progress.

Light Flashing Slowly - This slow ashing will occur whenever the transmitter

has been used to lock the doors, and also that the Starter Interrupt (if installed)

is engaged.

Light Flashes 1 to 4 Times after Ignition “On” - This is the number of oper-

ating transmitters stored in the system’s memory. These indicators are part of

the Automatic Transmitter Verication operation. This indicator will ash for 10

seconds after the vehicle’s ignition is turned ON.

Inhaltsverzeichnis

Andere Excalibur Fernstartsystem Handbücher

Excalibur

Excalibur RS-160-EDPplus Bedienungsanleitung

Excalibur

Excalibur RS-351-EDP Bedienungsanleitung

Excalibur

Excalibur AL-185X-EDPB Bedienungsanleitung

Excalibur

Excalibur RS-360-EDP Bedienungsanleitung

Excalibur

Excalibur AL-1650-EDPB Bedienungsanleitung

Excalibur

Excalibur RS-360-EDPB Bedienungsanleitung

Excalibur

Excalibur 1511 Bedienungsanleitung

Excalibur

Excalibur RS-X60-EDP Bedienungsanleitung

Excalibur

Excalibur RS-240-DP Bedienungsanleitung

Excalibur

Excalibur RS-340-EDPplus Bedienungsanleitung

Excalibur

Excalibur AL-2060-EDPB Bedienungsanleitung

Excalibur

Excalibur RS-360-EDP Bedienungsanleitung

Excalibur

Excalibur Excalibur RS-11 Produkthandbuch

Excalibur

Excalibur RS-340-EDPplus Bedienungsanleitung

Excalibur

Excalibur AL-1850-EDPB Bedienungsanleitung

Excalibur

Excalibur RS-340-EDP Bedienungsanleitung

Excalibur

Excalibur RS-250-DP Bedienungsanleitung

Excalibur

Excalibur AL-1775-3DB Bedienungsanleitung

Excalibur

Excalibur AL-XX70-B Bedienungsanleitung

Excalibur

Excalibur AL-1950-EDPB Bedienungsanleitung

Excalibur

Excalibur Excalibur RS-22 Produkthandbuch

Excalibur

Excalibur RS-275-3DB Bedienungsanleitung

Excalibur

Excalibur AL-1830-EDPB Bedienungsanleitung

Excalibur

Excalibur POWERSPORTS AL-1070-PS Betriebsanleitung

Beliebte Fernstartsystem Handbücher anderer Marken

AstroStart

AstroStart 803U Bedienungsanleitung

Durite

Durite 0-649-20 Handbuch

EINHELL

EINHELL BT-PS 1000 Handbuch

Linear

Linear ACCESS AK-21 Technische Daten

Soundstream

Soundstream TARANTULA RS.2 Bedienungsanleitung

Jaycar Electronics

Jaycar Electronics MB3752 Bedienungsanleitung

Ultra Start

Ultra Start 72 Series Bedienungsanleitung

ADS

ADS FLASHLOGIC FLRSVW1 Bedienungsanleitung

Selecta

Selecta JS012 Bedienungsanleitung

Black Widow Security

Black Widow Security BW RAS 400 Bedienungsanleitung

Vector

Vector Power City DK080706 Beilage

Code Alarm

Code Alarm CA-535 Bedienungsanleitung

Ozito

Ozito OJS-800 Bedienungsanleitung

Profi-Partner

Profi-Partner 46387 Bedienungsanleitung

EZ STARTER

EZ STARTER EZ-45 Bedienungsanleitung

Viper

Viper 4204 Bedienungsanleitung

Essex Electronics

Essex Electronics KE-1701 Bedienungsanleitung

EINHELL

EINHELL EGS 3600 Handbuch