EXFO FTB-1v2 Pro Bedienungsanleitung



FTB-1v2 and FTB-1v2 Pro

Accessing Connectors and Ports

Headset/microphone port

(for 3.5 mm connectors)

MicroSD card slot

(for cards compatible with the SDXC format)

USB 2.0 host ports

Ethernet (RJ-45) port

AC adapter/charger

connector

USB 3.0 host port

Module

Built-in power meter and VFL

(optional)

Mating connector

Replacing the Battery

Turn off the unit (shutdown) and disconnect it from AC power.

Using a flat screwdriver, turn the screws

counterclockwise until the module is loose.

Charging the Battery

Connect your unit to AC power with the

provided AC adapter/charger.

Pull on the battery’s tab to free it from its socket.

Slide in the new battery (poles facing down and

pointing to the same side of the case as

the mating connector). 7

Battery status LED

Green: Fully charged

Green, blinking: Charging

Yellow: Battery level is low

Position the unit so that its front panel rests on a flat surface such as a table.

Mating connector

Battery poles

Using a flat screwdriver, turn the screws clockwise until they are tighten.

4While holding the front panel and the module firmly together, turn the unit over, and position it so that the

module rests on a flat surface such as a table.

5Hold the front panel by its sides and pull it up.

Connection slot for the

module

Place the front panel on the module making sure that

the mating connector of the module is well aligned

with the corresponding slot on the front panel.

9While holding the front panel and the module firmly together, turn the unit over, and position it so that its

front panel rests on a flat surface such as a table.

Quick Reference Guide

Printed in Canada (2017-05)

P/N: 1071546 Version: 2.0.0.1 For more information,

refer to the user guide.

Using Your Unit Attaching Modules

WARNING

To avoid electrical shock, always shut down the unit, and

disconnect it from its external power source BEFORE removing a

module.

Never remove a module while the unit is turned on. This will result

in immediate and irreparable damage to both the module and unit.

2Place the front panel on the module making sure that the mating connector of the module is well

aligned with the corresponding slot on the front panel.

Using a flat screwdriver, turn the screws clockwise

until they are tightened.

To adjust brightness

Information about the connected module

To start the applications related to the module

To retrieve information about your unit

To view the online help

Keyboard/screen capture button

Press once to show the on-screen keyboard.

Press once again to hide it.

Hold down for a few seconds to take a screen

capture.

Task-switching button

Press once to view the list of running applications.

Press as many times as needed to select the desired

application.

On/Off button

Press to turn the unit on.

Press to shut down the unit (default

behavior).

Button bar

To access modules and instruments, test

tools, utilities, documentation, and

to configure your unit

Mating connector

Connection slot for the module

3While holding the front panel and the module firmly together, turn the unit over, and position it so that

its front panel rests on a flat surface such as a table.

Position the module so that its back panel rests on a flat surface such as a table.

The battery should be visible.

Andere Handbücher für FTB-1v2 Pro

Dieses Handbuch passt für folgende Modelle

Andere EXFO Messgerät Handbücher

EXFO

EXFO USER GUIDE Bedienungsanleitung

EXFO

EXFO OpticalRF Bedienungsanleitung

EXFO

EXFO IQ-5320 Bedienungsanleitung

EXFO

EXFO FTB-740 DWOCC Series Bedienungsanleitung

EXFO

EXFO IQS-5320-EI Bedienungsanleitung

EXFO

EXFO IQS-1500 Bedienungsanleitung

EXFO

EXFO FTB-5230S Bedienungsanleitung

EXFO

EXFO FPM-300 Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungsanleitung

EXFO

EXFO FTB-500 Bedienungsanleitung

EXFO

EXFO LTB-12 Bedienungsanleitung

EXFO

EXFO Optical Xplorer OX1 Bedienungsanleitung

EXFO

EXFO IQS-1700 Bedienungsanleitung

EXFO

EXFO IQ-5500 Bedienungsanleitung

EXFO

EXFO ETS-1000L Bedienungsanleitung

EXFO

EXFO T500S Bedienungsanleitung

EXFO

EXFO IQ Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

EXFO

EXFO FPM-600 Bedienungsanleitung

EXFO

EXFO PPM1 Bedienungsanleitung

EXFO

EXFO bv10 Bedienungsanleitung

EXFO

EXFO FOT-10A Bedienungsanleitung

EXFO

EXFO IQS-2400 Bedienungsanleitung

EXFO

EXFO R5000 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung