EXFO FTB-2 Bedienungsanleitung



FTB-2/FTB-2 Pro and FTB-4 Pro

Accessing Connectors and Ports

Headset/microphone port

(for 3.5 mm connectors)

External monitor port

(for monitors compatible with a DisplayPort interface)

USB 2.0 host port

Ethernet (RJ-45) port

USB 2.0 host port

USB 3.0 host port

Module slots

(two or four slots,

depending on models)

Stylus

Built-in power meter and VFL (optional)

Replacing Batteries

Position the unit so that its front panel rests on a flat surface such as a table.

Lift.

Turn the screws counterclockwise until

the compartment door is loose.

Remove.

Charging Batteries

Connect your unit to AC

power with the provided

AC adapter/charger (FTB-2

and FTB-2 Pro) or

power cord (FTB-4 Pro).

Pull on the battery’s tab to free it

from its socket. 5

Slide in the new battery (poles facing down

and pointing towards the back of the

battery socket). 6

7Put back in place.

While applying slight pressure, turn the

screws clockwise until they are tightened.

Battery status LED

Green: Fully charged

Green, blinking: Charging

Yellow: Battery level is low

Quick Reference Guide

Printed in Canada (2017-03)

P/N: 1070843 Version: 3.0.0.1 For more information,

refer to the user guide.

Keyboard/screen capture button

Press once to show the on-screen keyboard.

Press once again to hide it.

Hold down for a few seconds to take a screen capture.

Task-switching button

Press once to view the list of running applications.

Press as many times as needed to select the

desired application.

On/Off button

Press for one second to turn the unit on.

Press for one second to send the unit to sleep (default behavior).

Using Your Unit

Information about the inserted module To start the applications related to

the module

Button bar

To access modules and instruments, test tools,

utilities, documentation, and to configure your unit

To retrieve information about your unit

To view the online help

Inserting Modules

For an FTB module,

press to turn off your

unit.

CAUTION

For FTB modules: Never insert or remove a module while the unit is

turned on. This will result in immediate and irreparable damage to

both the module and unit.

For FTBx modules: There is no need to turn off your unit before

inserting or removing modules. However, to remove them properly

and avoid problems, follow the instructions from the user guide.

2Place the module vertically so that you can

see its faceplate and the protruding edges are

on the left side.

3Insert the protruding edges of the module into

the grooves and push all the way to the back.

4Secure the module.

For an FTBx module, turn

the two retaining screws

clockwise.

For an FTB module, turn the

retaining screw (located on

the left panel) clockwise.

For heavier FTB modules such as the OSA or the FTB-88100NGE

PowerBlazer, secure the module with front locking screws

(turn clockwise).

Module adapters (must be installed before inserting FTB modules)

Andere Handbücher für FTB-2

Dieses Handbuch passt für folgende Modelle

Andere EXFO Messgerät Handbücher

EXFO

EXFO IQ-1200 Bedienungsanleitung

EXFO

EXFO T100S-HP Series Betriebsanleitung

EXFO

EXFO OmniCure R2000 Bedienungsanleitung

EXFO

EXFO OSA20 Bedienungsanleitung

EXFO

EXFO IQS-5320 Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

EXFO

EXFO FLS-2600B Bedienungsanleitung

EXFO

EXFO IQS-12008 Bedienungsanleitung

EXFO

EXFO R5000 Bedienungsanleitung

EXFO

EXFO FTB-5800 Bedienungsanleitung

EXFO

EXFO IQ Series Bedienungsanleitung

EXFO

EXFO bv10 Bedienungsanleitung

EXFO

EXFO EPM-50 Bedienungsanleitung

EXFO

EXFO PMD Analyzer 5500B Bedienungsanleitung

EXFO

EXFO PPM-350C Bedienungsanleitung

EXFO

EXFO IQ-5500 Bedienungsanleitung

EXFO

EXFO LTB-12 Bedienungsanleitung

EXFO

EXFO FTB-2 Pro Bedienungsanleitung

EXFO

EXFO FTB-1v2 Pro Bedienungsanleitung

EXFO

EXFO FOT-5200 Bedienungsanleitung

EXFO

EXFO FTB-5230S Bedienungsanleitung

EXFO

EXFO IQS-5320-EI Bedienungsanleitung

EXFO

EXFO IQ-5320 Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung