Extreme Networks SA201 Bedienungsanleitung

Extreme Networks SA201

Defender Adapter

Installation Guide

9035973

Published October 2018

Legal Notice

Extreme Networks, Inc. reserves the right to make changes in speciﬁcations and other information

contained in this document and its website without prior notice. The reader should in all cases

consult representatives of Extreme Networks to determine whether any such changes have been

made.

The hardware, ﬁrmware, software or any speciﬁcations described or referred to in this document

are subject to change without notice.

Trademarks

Extreme Networks and the Extreme Networks logo are trademarks or registered trademarks of

Extreme Networks, Inc. in the United States and/or other countries.

All other names (including any product names) mentioned in this document are the property of

their respective owners and may be trademarks or registered trademarks of their respective

companies/owners.

For additional information on Extreme Networks trademarks, please see:

www.extremenetworks.com/company/legal/trademarks

Software Licensing

Some software ﬁles have been licensed under certain open source or third-party licenses. End-

user license agreements and open source declarations can be found at:

www.extremenetworks.com/support/policies/software-licensing

Support

For product support, phone the Global Technical Assistance Center (GTAC) at 1-800-998-2408

(toll-free in U.S. and Canada) or +1-408-579-2826. For the support phone number in other

countries, visit: http://www.extremenetworks.com/support/contact/

For product documentation online, visit: https://www.extremenetworks.com/documentation/

Table of Contents

Chapter 1: Overview...................................................................................................................4

Package Contents.................................................................................................................................................................4

Power Connections..............................................................................................................................................................4

LEDs.............................................................................................................................................................................................5

SA201 Side Ports................................................................................................................................................................... 7

Chapter 2: Installation............................................................................................................... 8

Mounting the SA201 Adapter..........................................................................................................................................8

Chapter 3: Connecting the SA201 unit to the network.......................................................12

Chapter 4: Speciﬁcations........................................................................................................ 13

Chapter 5: Regulatory Information........................................................................................14

FCC Declaration of Conformity Statement.............................................................................................................14

Industry Canada Notice....................................................................................................................................................15

FCC Radiation Exposure Statement...........................................................................................................................15

Safety Guidelines................................................................................................................................................................. 15

European Waste Electrical and Electronic Equipment (WEEE) Notice................................................... 16

Hazardous Substances......................................................................................................................................................16

Declaration of Conformity in Languages of the European Community...................................................16

NCC Statement..................................................................................................................................................................... 17

Index........................................................................................................................................... 18

Extreme Networks SA201 Defender Adapter 3

1Overview

Package Contents

Power Connections

LEDs

SA201 Side Ports

The SA201 is an Open Networking Adapter IoT (Internet of Things) solution that is used to securely

deploy IoT devices. SA201 adapter can be used to provide proxy service for the Defender Adapter

Application. SA201 has a full layer 1-7 visibility and can be paired 1:1 with a medical or IoT device in a

hospital or campus environment. The SA201 solution capabilities include:

•Isolation of trac into encrypted zones using HyperSec technology set. This helps reduce the attack

surface and mitigates ill intended lateral movement toward sensitive areas of the network.

•Protection of IoT devices from being seen from harmful trac such as viruses and malware.

•Filteration of tarc ﬂows by limiting what the device receives and transmits.

•Use of Follow Me proﬁles that are set centrally and applied on a by-device basis. This helps in

automatic assignment of proﬁles when the device is connected or disconnected from the network.

Note

The SA201 requires a minimum base ﬁrmware of Defender 3.1. For Cloud, the minimum base

ﬁrmware is ExtremeCloudTM Appliance 4.26.02.

Package Contents

Verify the box contents of the SA201 Adapter as listed:

•SA201 Defender Adapter

•Two M4 wood screws; the head may be up to 2.5mm thick. Screw dimension: 3.5x25.4mm

•Two screw-in wall anchors

•SA201 Quick Reference Guide

•ExtremeCloud™Quick Start Card

Power Connections

Power Sources

The SA201 Adapter uses Power over Ethernet (PoE) as follows:

Extreme Networks SA201 Defender Adapter 4

Table 1: Main Power Source

Power Source Description

Power over Ethernet Power is provided through the RJ45 Ethernet port

(LAN1 port) on the Network side of the SA201 adapter.

When the SA201 adapter is powered by 802.3AT, the

DEVICE port is capable of power sourcing (refer Figure).

Table 2: Optional Power Source

Optional Power Source Description

External 12V DC Power Supply (optional; #30512 - PWR

12VDC, 2A, 2.1mm x 5.5mm connector)

The SA201 can also be powered by an external DC

power supply plugged into an AC source. Plug the

supply’s input jack into the DC-In port.

Note

If the SA201 adapter is plugged into the PoE switch port and the 12V DC-In port, the unit will

use the DC input power source over the PoE port.

Note

The SA201 adapter requires a reboot when the input power source is changed.

LEDs

LEDs on SA201 Adapter

There are LEDs on four of the six sides of the SA201 unit. The ﬁgure below shows the LEDs on the front

cover of the adapter.

Overview

Extreme Networks SA201 Defender Adapter 5

Figure 1: LEDs on front cover of SA201

Power Status

PSE Client Port IoT (BLE or 802.15.4)

Table 3: SA201 LED Status

LED Icon LED Color Description

Power GREEN Normal power status

Status GREEN Normal operational status

AMBER Non-operational status

PSE Client Port GREEN Normal operational status (DEVICE

port is capable of providing PoE)

OFF Non-operational status

IoT (BLE) BLUE Indicates BLE is enabled

OFF Non-operational status

Overview

Extreme Networks SA201 Defender Adapter 6

SA201 Side Ports

The sides ports of SA201 are used to power up and connect the adapter.

Figure 2: SA201 Ethernet Port

Figure 3: SA201 12V DC Power Supply Port

Overview

Extreme Networks SA201 Defender Adapter 7

2Installation

Mounting the SA201 Adapter

Follow this procedure to install the SA201 adapter:

1 Match the model number on the purchase order with the model number in the packing list and on

the SA201 adapter.

Table 4: SA201 Product Information

Part Number Description

39505 Surge Adapter 201 IoT Solution; Ethernet Security

Device (QXO-SA201-FCC).

2Verify the box contents.

3 Review and follow the safety guidelines.

4 Mount the unit to a table, on a shelf, or to a wall.

5Connect the SA201 adapter to the network.

Mounting the SA201 Adapter

Use these instructions as guidelines for mounting the SA201 easily and safely.

Caution

Use ESD (Electrostatic Discharge) protection wrist strap when installing the SA201 adapter.

Important

The SA201 unit may become very warm during normal use. It complies with the user-

accessible surface temperature limits deﬁned by the International Standards for Safety (IEC

60950-1 and IEC 62368).

SA201 mounting scenarios include:

1 Mounting on a table.

2 Mounting to a shelf.

3 Mounting to a wall.

Mounting on a table

To mount the SA201 adapter on a table:

1 Place the SA201 adapter on a table close to the Device and Network cables.

Extreme Networks SA201 Defender Adapter 8

2 Connect the Device and Network LAN cables.

Figure 4: Mounting the SA201 adapter on a table

Mounting to a shelf

To mount the SA201 adapter to a shelf:

1 Place the SA201 at a secure position close to the corresponding equipment.

2 Secure the unit using wire ties.

3 Connect the LAN cables.

Mounting to a wall

You can mount the SA201 adapter using the wall mount keyholes in the back of the unit. The keyholes

are bidirectional and let the adapter to be mounted in either direction. To mount the SA201 adapter to a

wall:

Installation

Extreme Networks SA201 Defender Adapter 9

Figure 5: Tools required

Table 5: Tools Required to mount to a wall

Number Description

1 Flat-head screwdriver

2 M4 screws and wall anchors

3 ESD-protective wrist strap (purchased separately)

1 Mark the two hole centers. The two screw centers should be 3.6” apart.

Installation

Extreme Networks SA201 Defender Adapter 10

Inhaltsverzeichnis

Andere Extreme Networks Adapter Handbücher

Extreme Networks

Extreme Networks 10965 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung