F&F BIS-412M 24V Bedienungsanleitung

- 1 -

Electronic bistable pulse relay BIS-412M is designed to work in

a group system. The single relay allows you to control the re-

ceiver using momentary (bell) buttons, connected to local con-

trol inputs. Additionally, thanks to the central control inputs, it

is possible to group control of many receivers simultaneously.

The lighting of the green LED marked with the U symbol means

that the device is properly powered. The device can be control-

led from the level of local and central inputs.

Local control

The receiver is turned on (the relay contact is switched to po-

sition 7-10) after pressing any momentary button from the local

control group. The activation of the receiver is signaled by the

lighting of the red LED diode. Another pressing of the button

from the local control group will turn off the receiver (the con-

tact returns to position 7-12).

Purpose

Functioning

F&F Filipowski sp. j.

Konstantynowska 79/81, 95-200 Pabianice, POLAND

phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71

www.fif.com.pl; e-mail: biuro@fif.com.pl

Do not dispose of this device in the trash along with other waste! According to the Law on

Waste, electro coming from households free of charge and can give any amount to up to



ment (in accordance with the principle of old-for-new, regardless of brand). Electro thrown

in the trash or abandoned in nature, pose a threat to the environment and human health.

BIS-412M 24V

Bistable relay (group) with

„memory” contact position

- 2 -

Central control

 (input no. 9) – pressing the momentary

button connected to this input will always turn off the receiver

(regardless of its previous state). The relay contacts will be swit-

ched to position 7-12. This input allows you to centrally control a

group of devices with a single button.

  (input no. 4) – pressing the momentary

button connected to this input will always turn on the receiver

(regardless of its previous state). The relay contacts will be swit-

ched to position 7-10. This input allows you to centrally control a

group of devices with a single button.

The relay has the feature of the so-called "memory" of the con-

tact position, which means when the power supply is switched

back on, the relay will be restored to the state it was in when the

power supply was switched off.

1.Disconnect the power supply.

2.Fix the relay on a rail in the control box.

Do not install a device that is damaged or incomplete.

3.Connect the power wires to terminals 1-3 according to the

diagram.

A group of relays working with common central control

must be powered from the same line (~) for AC or only

from (+) for DC.

Mounting

- 3 -

Be especially careful when installing the controller.

Incorrect connection may result in electric shock and/or

damage to the controller and the powered device.

4.Connect the local control and central control switches to the

relay terminals according to the function and to the common

wire (~) or (+).

Connecting to the control inputs of relays of different

lines (~) or (+) may cause incorrect operation of the sys-

tem and lead to an electric short circuit in the installa-

tion and destruction of the controllers.

5.Connect the relay contact in series into the power supply cir-

cuit of the controlled receiver (lighting) (connect the power

to terminal 7; supply the controlled receiver from the contact

10).

6.Connect the power supply.

BIS-412M 24V is not compatible with backlit buttons.

Contact configuration

- 4 -

1-3 relay power supply 9÷30 V AC/DC

4 central control: 

6 local control: 

9 central control: 

7-10-12 1×NO/NC separated changeover contact

With the DC supply voltage, the control inputs can be

powered only from the "plus" wire (+).

Wiring diagram

- 5 -

Group system diagram

- 6 -

power supply 9÷30 V AC/DC

contact separated 1×NO/NC

maximum load current (AC-1) 16 A

activation delay 0.1÷0.2 s

power indication green LED

signalling indication red LED

power consumption

standby 0.15 W

on 0.6 W

 

 

working temperature -25÷50°C

dimensions 1 module (18 mm)

mounting on TH-35 rail

ingress protection IP20

Table for loads supplied with 230 V AC:

tungsten halogen fluorescent energy-saving LED

    

The above data are indicative and will heavily depend on the

design of a specific receiver (that is especially important for

LED bulbs, energy-saving lamps, electronic transformers and

       

conditions.

For more information visit: www.fif.com.pl.

Technical data

Power table

- 7 -

The F&F products are covered by a warranty of the 24 months

ffrom the date of purchase. Effective only with proof of purcha-

se. Contact your dealer or directly with us.

F&F Filipowski sp. j. declares that the device is in conformity

        

(LVD) 2014/35/EU and the Electromagnetic Compatibility (EMC)

Directive 2014/30/UE.

The CE Declaration of Conformity, along with the references to

the standards in relation to which conformity is declared, can be

found at www.fif.com.pl on the product page.

Warranty

CE declaration

E220126

Inhaltsverzeichnis

Andere F&F Relais Handbücher

F&F

F&F BIS-410-LED Bedienungsanleitung

F&F

F&F BIS-410 Bedienungsanleitung

F&F

F&F PCS-516 DUO Bedienungsanleitung

F&F

F&F PCS-506 Bedienungsanleitung

F&F

F&F PP-1P Bedienungsanleitung

F&F

F&F FW-R2P Bedienungsanleitung

F&F

F&F PZ-829 RC Bedienungsanleitung

F&F

F&F 5908312592389 Bedienungsanleitung

F&F

F&F BIS-411BM-LED Bedienungsanleitung

F&F

F&F PP-2Z Bedienungsanleitung

F&F

F&F PCS-516UNI Bedienungsanleitung

F&F

F&F CP-721-FPV Bedienungsanleitung

F&F

F&F 5908312595649 Bedienungsanleitung

F&F

F&F BIS-411i Bedienungsanleitung

F&F

F&F BIS-410i Bedienungsanleitung

F&F

F&F PCS-516UNI Bedienungsanleitung

F&F

F&F PK-2P Bedienungsanleitung

F&F

F&F FW-R2D Bedienungsanleitung

F&F

F&F PK-1P Bedienungsanleitung

F&F

F&F BIS-410-24V Bedienungsanleitung

F&F

F&F EPP-618 Bedienungsanleitung

F&F

F&F PK-1Z-LED 230 V Bedienungsanleitung

F&F

F&F BIS-411i Bedienungsanleitung

F&F

F&F FOX HERMETIC BOX Bedienungsanleitung

Beliebte Relais Handbücher anderer Marken

Shelly

Shelly Pro Series Bedienungsanleitung

GE MVAX 11 Bedienungsanleitung

ABB

ABB RELION REF615R Bedienungsanleitung

Pilz

Pilz PNOZ X10 Betriebsanleitung

Kemo Electronic

Kemo Electronic B197 Bedienungsanleitung

Seg

Seg MRM3 Bedienungsanleitung

Basler

Basler BE1-700C Bedienungsanleitung

CD Automation

CD Automation REVEX 2PH 280A Bedienungsanleitung

ABB

ABB SPAJ 142 C Stücklistenhandbuch

Ruelco

Ruelco 1S04 Bedienungsanleitung

Basler

Basler V3E Z1P B2C1F Bedienungsanleitung

Doepke

Doepke Dupline DSM 2 Bedienungsanleitung

Siemens

Siemens SIRIUS 3RT1966-4D Bedienungsanleitung

GE DGP Bedienungsanleitung

Kyongbo Electronics

Kyongbo Electronics GDR-D01 Bedienungsanleitung

Siemens

Siemens SIPROTEC 4 Bedienungsanleitung

Siemens

Siemens BD2-AK03X/FS Series Bedienungsanleitung

Leuze

Leuze MSI-SR5B Bedienungsanleitung