FeiYu Tech SCORP 2 Bedienungsanleitung
Instructions V 1.0
Tutorial Videos
Catalogue
1. Overview ……………………………………………………………………………………………………… 1
2. Getting started ……………………………………………………………………………………………… 2
2.1 Charging ……………………………………………………………………………………………………………… 2
2.2 Adjust the gimbal to gimbal balancing position ……………………………………………………………… 2
2.3 Using support stand ……………………………………………………………………………………………… 3
3. Mounting the Camera ……………………………………………………………………………………… 3
3.1 Attach the quick release plate and camera backing base(Optional) ……………………………………… 3
3.2 Install lens holder (Optional) ……………………………………………………………………………………… 4
3.3 Mount camera on gimbal ………………………………………………………………………………………… 4
4. Gimbal Balancing …………………………………………………………………………………………… 5
4.1 Balancing the tilt axis ……………………………………………………………………………………………… 5
4.2 Balancing the roll axis ……………………………………………………………………………………………… 6
4.3 Balancing the pan axis …………………………………………………………………………………………… 7
4.4 Using the memory slider ………………………………………………………………………………………… 8
5. Power ON/ OFF& Wake up ………………………………………………………………………………… 8
5.1 Power ON/ OFF ……………………………………………………………………………………………………… 8
5.2 Lock/Unlock screen ………………………………………………………………………………………………… 9
5.3 Sleep/Wake up ……………………………………………………………………………………………………… 9
6. Function/Modes introduction …………………………………………………………………………… 9
6.1 Follow modes introduction ……………………………………………………………………………………… 10
6.2 Other function introduction ……………………………………………………………………………………… 10
7. App Connecting …………………………………………………………………………………………… 11
7.1 Connect with Feiyu SCORP App ………………………………………………………………………………… 11
7.2 Function introduction of App …………………………………………………………………………………… 11
8. Operation ………………………………………………………………………………………………… 15
8.1 Button operation …………………………………………………………………………………………………… 15
8.2 Touch screen operation …………………………………………………………………………………………… 18
8.3 Function operation ………………………………………………………………………………………………… 21
8.4 Control ports ………………………………………………………………………………………………………… 27
9. Specications …………………………………………………………………………………………… 28
Tutorial
·The tutorial videos can be watched at FeiyuTech ocial
website or scan the QR code.
https://www.feiyu-tech.com/play/
Download the App
Scan the QR code to download the app, or
search for "Feiyu SCORP" in the App Store or
Google Play.
* Requires iOS 9.0 or above, Android 6.0 or above.
iOS Android
- 1 -
1. Overview
* Not include camera.
[8]
[21]
[20]
[29]
[40]
[9]
[10]
[11]
[34][35]
[18][17] [19]
[1]
[7]
[13][14] [15]
[17]
[36]
[12]
[37]
[25]
[38]
[41]
[28]
[42]
[12]
[16]
[30]
[31]
[26]
[32]
[33]
[23]
[22]
[24]
[27] [39]
[2]
[43]
[3]
[4]
[5]
[6]
[1] Power button
[2] Touch screen
[3] Shutter button
[4] Mode button
[5] Joystick
[6] F1 button
[7] Kickstand
[8] Handle
[9] FPV button
[10] Knob function switching
button
[11] Multifunction knob
[12] Anti-drop lock for slider
[13] Slider
[14] Quick release plate lock
[15] Slider lock
[16] Vertical arm
[17] Anti-drop lock
[18] Quick release plate
[19] Camera backing base
[20] Slider
[21] Slider lock
[22] Image transmission port
[23] Extension port 1
[24] Coss arm lock knob
[25] Cross arm
[26] Trigger button
[27] Roll lock
[28] Versatile arm
[29] F2 button
[30] Tilt lock
[31] Tilt axis
[32] Camera for tracking
module
[33] Indicator light for
tracking module
[34] Lens holder
[35] Lens holder screw
[36] Extension port 2
[37] Camera control port/
USB-C power output port①
[38] Vertical arm lock knob
[39] Pan axis
[40] Pan lock
[41] A/B button
[42] Trigger button
[43] 1/4 inch thread hole
① Supports charging for shooting devices compatible with the USB power supply protocol.
- 2 -
2. Getting started
2.1 Charging
Please fully charge the battery before power on the gimbal for the rst time.
Charging with USB-C cable, supports quick charge which charging power ≤ 18W.
2.2 Adjust the gimbal to gimbal balancing position
The gimbal is folded by default, please unlock all the three axes and adjust the
gimbal to gimbal balancing position, and then lock the three axes.
1
2
3
Gimbal folded position Gimbal balancing position
- 3 -
2.3 Using support stand
Users can unfold the built-in kickstand or install tripod to place the gimbal on a at
surface.
Unfold the built-in kickstand Unfold the tripod
3. Mounting the Camera
Before mounting the camera, make sure the camera is ready for shooting (Install the
camera lens, and the lens cover should be removed, the memory card and battery
needs to be inserted to the camera, and battery is fully charged) , complete all the
steps which mentioned in chapter "2. Getting started" and the gimbal is adjusted to
gimbal balancing position. Make sure the gimbal is powered o or in sleep mode
before mounting the camera.
3.1 Attach the quick release plate and camera backing
base(Optional)
Attach the quick release plate to camera by tightening the screw.
User can choose to attach the camera backing base if needed ( For example, when
using a long or heavy lens). Attach the camera backing base to camera, then attach it
to quick release plate by tightening 2 screws.
- 4 -
Attach with quick release plate only Attach with camera backing base and quick
release plate
3.2 Install lens holder (Optional)
Install the lens holder on the quick release plate if needed, the rubber of the lens
holder must be directly under the lens. It is recommended to use the lens holder
when using a long or heavy lens.
3.3 Mount camera on gimbal
Unlock ①, slide ② into the slot, lock ①, loosen ③, slide ④ into the slot as
indicated, adjust the camera forward and backward until roughly balanced, then
tighten ③.
- 5 -
2
1
4
31
It is recommended to push the camera against the tilt axis. Unlock ① to move the
camera left or right according to camera's width to adjust, then lock ① .
1
1
4. Gimbal Balancing
Please balance the gimbal before shooting. Make sure the
camera and lens are ready for shooting, and the gimbal
is powered o or in sleep mode before balancing. It is
recommended to hold up the camera rst, then move the
slide arm, cross arm and vertical arm. Tutorial Videos
4.1 Balancing the tilt axis
4.1.1 Balancing the vertical tilt
a. Unlock the tilt lock ① , and loosen the slide arm lock ②.
b. Rotate the tilt axis so that the camera lens is pointing upward. Check the direction
- 6 -
which the lens tilts to.
c. If the lens tilts to one side, then the camera is that side heavy, move the slide
arm ③ to the opposite direction, until the camera is steady pointing upward.
d. Tighten the slide arm lock ② while holding the camera.
3
2
1
4.1.2 Adjust depth for the tilt axis
a. Rotate the tilt axis so that the camera lens is pointing forward. Check the direction
which the lens tilts to.
b. If the lens tilts to one side, then the camera is that side heavy, unlock the quick
release plate lock ① and then move the quick release plate to the opposite direction,
until the camera is steady pointing forward.
c. Lock the quick release plate lock ① while holding the camera.
The tilt axis is balanced when the camera is steady while tilted up or down by 45° .
2
1
4.2 Balancing the roll axis
a. Unlock the roll lock ① , check the direction which the camera tilts to.
- 7 -
b. If the camera tilts to one side, then the camera is that side heavy, loosen the cross
arm lock knob ②and then move the cross arm to the opposite direction, until the
camera can stay still and horizontal to the ground.
c. Tighten the cross arm lock knob ②.
The roll axis is balanced when the camera can stay still and horizontal to the ground.
3
2
1
4.3 Balancing the pan axis
a. Unlock the pan lock ①. Hold the tripod, and tilt the gimbal forward until it is
horizontal to the ground.
b. If the camera tilts to one side, then the camera is that side heavy, loosen the
vertical arm lock knob ② and then move the vertical arm ③ to the opposite
direction, until the camera can stay still and horizontal to the ground.
c. Tighten the vertical arm lock knob ②.
The pan axis is balanced when the camera can stay still and horizontal to the ground.
3
1
2
Inhaltsverzeichnis
Andere FeiYu Tech Kamerazubehör Handbücher
FeiYu Tech
FeiYu Tech SCORP PRO Bedienungsanleitung
FeiYu Tech
FeiYu Tech SCORP F2 Bedienungsanleitung
FeiYu Tech
FeiYu Tech G6 Bedienungsanleitung
FeiYu Tech
FeiYu Tech AK2000 Bedienungsanleitung
FeiYu Tech
FeiYu Tech G5 Bedienungsanleitung
FeiYu Tech
FeiYu Tech SPG 2 Bedienungsanleitung
FeiYu Tech
FeiYu Tech Vimble 2A Bedienungsanleitung
FeiYu Tech
FeiYu Tech WCP2S Bedienungsanleitung
FeiYu Tech
FeiYu Tech MiNi 3D Bedienungsanleitung
FeiYu Tech
FeiYu Tech Cambox Bedienungsanleitung
FeiYu Tech
FeiYu Tech a1000 Bedienungsanleitung
FeiYu Tech
FeiYu Tech AK2000S Bedienungsanleitung
FeiYu Tech
FeiYu Tech AKFI Bedienungsanleitung
FeiYu Tech
FeiYu Tech AK4500 Installationsanleitung
FeiYu Tech
FeiYu Tech Vimble 2S Installationsanleitung
FeiYu Tech
FeiYu Tech SCORP Mini Bedienungsanleitung
FeiYu Tech
FeiYu Tech SPG Bedienungsanleitung
FeiYu Tech
FeiYu Tech AK2000S Bedienungsanleitung
FeiYu Tech
FeiYu Tech MG Bedienungsanleitung
FeiYu Tech
FeiYu Tech VB 4SE Bedienungsanleitung
