FeiYu Tech Vimble C Kurzanleitung

Guilin Feiyu Technology Incorporated Company

Guilin Feiyu Technology Incorporated Company www.feiyu-tech.com [email protected]

- 1 -

VimblecGimbal

Firmware Upgrade Manual

Attention :

 Please do not operate any other function button except the ones indicated by

the instructions during upgrade.

 The firmware upgrade software is compatible with Windows operation system

provisionally,including Window XP / 7 / 8 / 8.1 / 10.

If you want to upgrade it in Mac, Please kindly download the upgrade software

and USB driver for Mac from our official website.

If you want to get the current version of the gimbal, please do the operations

step 1~6.

1. Download the USB driver from FeiyuTech official website

http://www.feyu-tech.com and install it. Then download the upgrade software

and the firmware for Vimble c.

2. Please refer the following connection diagram, connect the USB cable with

USB port of the computer and the gimbal. Check the port number in device

manager .

If the port number is more than COM10 , please modify it to the available

number which is within COM10 . ( please make sure the gimbal is powered off

until step 6)

Guilin Feiyu Technology Incorporated Company

Guilin Feiyu Technology Incorporated Company www.feiyu-tech.com [email protected]

- 2 -

3. Run the software ---“Gimbal-Update-3AXIS”directly if you use a PC with

Windows XP/7/8/8.1 .

If you have a PC with windows10 operation system, please right click the icon of

the software ,choose “Trouble shoot compatibility”---”Try the recommended

settings”---”test program”, Run the upgrade software in compatibility mode.

4. Software interface is shown in following picture.:

5. Choose the correct port number and the correct baud rate-115200, then click

OPEN button to open the com port.(The serial port number should be the

same as step 2).

6. Long press the function button, The connection between the gimbal and the

computer will be established automatically, The connection status and the

current version show up(For example, “LINK OK! VERSION 1. 48”) , Keep

holding the function button for 2~3 seconds after “LINK OK” showing up.

Guilin Feiyu Technology Incorporated Company

Guilin Feiyu Technology Incorporated Company www.feiyu-tech.com [email protected]

- 3 -

Release it, the indicator will alternately flashing blue and red，Which means

the power is ready and the connection is done.

(Tips: if you can’t see that the indicator alternately flashing blue and red,

please long press the function button for 2 seconds again.)

7. Click on OPEN FILE button and choose the correct firmware for the Vimble

c.

8. Click on UPDATE button to start upgrading, the process will display on the

software.

Guilin Feiyu Technology Incorporated Company

Guilin Feiyu Technology Incorporated Company www.feiyu-tech.com [email protected]

- 4 -

9. After all the blocks of the firmware are completely sent , please click “Confirm”

button to finish the upgrade. Close the software then remove the USB cable.

Long press the function button of the gimbal to power off. All the upgrade is done.

–––– END ––––

Note: We reserve the right to change this manual at any time!And the newest edition will

be shown on our official website www.feiyu-tech.com.

Inhaltsverzeichnis

Andere FeiYu Tech Kamerazubehör Handbücher

FeiYu Tech

FeiYu Tech SCORP PRO Bedienungsanleitung

FeiYu Tech

FeiYu Tech AK2000 Bedienungsanleitung

FeiYu Tech

FeiYu Tech AK2000S Bedienungsanleitung

FeiYu Tech

FeiYu Tech SPG 2 Bedienungsanleitung

FeiYu Tech

FeiYu Tech G5 Bedienungsanleitung

FeiYu Tech

FeiYu Tech AK4000 Bedienungsanleitung

FeiYu Tech

FeiYu Tech G6 Installationsanleitung

FeiYu Tech

FeiYu Tech SPG Bedienungsanleitung

FeiYu Tech

FeiYu Tech AK4500 Installationsanleitung

FeiYu Tech

FeiYu Tech G5 Bedienungsanleitung

FeiYu Tech

FeiYu Tech MG Bedienungsanleitung

FeiYu Tech

FeiYu Tech SCORP 2 Bedienungsanleitung

FeiYu Tech

FeiYu Tech Feiyu-WCP2 Bedienungsanleitung

FeiYu Tech

FeiYu Tech VIMBLE 2A Bedienungsanleitung

FeiYu Tech

FeiYu Tech Feiyu Pocket 2 Bedienungsanleitung

FeiYu Tech

FeiYu Tech SPG Bedienungsanleitung

FeiYu Tech

FeiYu Tech MiNi 3D Bedienungsanleitung

FeiYu Tech

FeiYu Tech MINI 3D Pro Bedienungsanleitung

FeiYu Tech

FeiYu Tech FY WG2 Bedienungsanleitung

FeiYu Tech

FeiYu Tech AK Series Bedienungsanleitung

FeiYu Tech

FeiYu Tech G6 Bedienungsanleitung

FeiYu Tech

FeiYu Tech G4 Plus Bedienungsanleitung

FeiYu Tech

FeiYu Tech SCORP-C Bedienungsanleitung

FeiYu Tech

FeiYu Tech SCORP-C Bedienungsanleitung

Beliebte Kamerazubehör Handbücher anderer Marken

Viltrox

Viltrox EF-NEX Montageanleitung

Calumet

Calumet 7100 Series CK7114 Bedienungsanleitung

Ropox

Ropox 4Single Series Bedienungsanleitung

Cambo

Cambo Wide DS Digital Series Betriebsanleitung

Samsung

Samsung SHG-120 Bedienungsanleitung

Ryobi

Ryobi BPL-1820 Bedienungsanleitung

Aegis

Aegis ABL-36020P Bedienungsanleitung

Pentax

Pentax Data Back Fc Bedienungsanleitung

Fantasea

Fantasea EyeGrabber F Series Bedienungsanleitung

Honeywell

Honeywell HDZ20HD Bedienungsanleitung

EGO

EGO BA1400T Bedienungsanleitung

Sima

Sima SRW-62 Bedienungsanleitung

Shape

Shape A7SSMKIT Bedienungsanleitung

Slide Kamera

Slide Kamera HST-2 Bedienungsanleitung

Power works

Power works 2902613 Bedienungsanleitung

SES

SES SE-2047-2 Bedienungsanleitung

Olympus

Olympus PT-EP05L Bedienungsanleitung

Starlite

Starlite OctoDome nxt Bedienungsanleitung