Fenix FD30 Technisches Handbuch

Fenix FD30 Flashlight

1 Functional switch ② Tactical switch

Dual reflector ③ 360° rotary focusing ring ④ 18650*1/CR1 3A*

Technical Parameters

ANSI/PLATO FL1

General Mo e Strobe

Turbo High Me Low Eco

Output

900

Lumens

350

Lumens

150

Lumens

900

Lumens

Runtime

h* 4h30min 11h 40h

30min 170h /

Distance

Spotlight 00m 117m 77m 44m 17m /

Floo light 67m 43m 8m 16m 8m /

Intensity

Spotlight 10,000cd 3,400cd 1,500cd 500cd 70cd /

Floo light 1,100cd 460cd 00cd 65cd 15cd /

Impact Resistance

Waterproof

IP68, underwater m

Accessories Lanyard, holster, spare O-ring, spare rubber switch boot, body clip

Notice: The above-mentioned parameters (lab-tested by using Fenix 3.6V/3500mAh 18650

rechargeable Li-ion battery) may vary between flashlights, batteries and environment.

*Due to the dual overheat protection; the runtime of Turbo is estimated.

Open

Uses Cree XP-L HI LED with a lifespan of 50,000 hours

Powered by one 18650 rechargeable Li-ion battery or two CR1 3A batteries

140.5mm Length x 3mm Body Diameter x 5.4mm Head Diameter

96 grams (excluding battery)

Dual reflector optical system

360°rotary focusing technology

Digitally regulated output maintains constant brightness

Reverse polarity protection, to protect from improper battery insertion

Intelligent overheat protection to avoid high surface temperature

Tactical tail switch for momentary on and constant activation

Functional side switch for output selection

Made of durable aircraft-grade aluminum

Premium type Ⅲ hard-anodized anti-abrasive finish

Operation Instruction

The tail cap switch is the tactical switch, and the side button switch is the functional switch.

①ON/OFF

Tap the tactical switch to turn on the light momentarily, release it and the light will go out.

Click the tactical switch to turn on the light constantly, click once again to switch off the light.

②Output Selection

With the light on, by single clicking the functional switch continually, the light will cycle through

Turbo→Eco→Low→Med→High.

Strobe

With the light on, press and hold the functional switch for 0.5 seconds to activate Strobe; with

another single click the light will return to previously used General brightness level.

③Spotlight an Floo light A justment

The factory default will be total floodlight. Rotate the focusing ring to regulate the dual reflector,

thus changing between spotlight and floodlight.

Intelligent Memory Circuit

The flashlight memorizes the last brightness level used in the General mode. The next time it is

turned on, it will recall the previously used General brightness level.

Intelligent Overheat Protection

The light will accumulate a lot of heat when Turbo output level is repeatedly selected for

extended periods. If the light reaches a temperature of 65 , it will automatically downshift to℃

High output level. Turbo can be reselected if needed, but service life could be shortened or the

flashlight could be damaged permanently.

Low-voltage Downshift Function

When the voltage level drops below the preset level, the flashlight is programmed to downshift

to lower brightness levels until Low output is reached. When Low output mode is reached, the

flashlight blinks three times every five minutes to remind you to charge the light or replace the

battery. To ensure normal use, the flashlight will not turn off and will work until the battery is

completely discharged.

Battery Specifications

Type Dimensions Nominal Voltage Usability

Fenix ARB-L18 Series 18650 3.6V/3.7V Recommende

d√√

Fenix ARB-L Series 18650 3.6V/3.7V Recommende

d√√

Non-rechargeable

Battery

(Lithium)

CR1 3A 3V Usable √

Rechargeable Battery

(Li-ion) 18650 3.6V/3.7V Caution* ！

Rechargeable Battery

(Li-ion) 16340 3.6V/3.7V Caution* ！

Rechargeable Battery

(LiFePO4)18650 3. V Banned ×

*Li-ion batteries are powerful cells designed for commercial applications and must be treated

with caution and handled with care. Quality batteries with circuit protection will reduce the

potential for combustion or explosion but cell damage or short circuiting are potential risks the

user assumes.

④Battery Replacement

Unscrew the tail cap to insert the battery with the anode side (+) towards the light head, then

screw the tail cap back on.

Usage an Maintenance

Disassembling the sealed head can cause damage to the light and will void the warranty.

Fenix recommends using excellent quality battery. If the light will not be used for an

extended period, remove the battery, or the light could be damaged by electrolyte leakage

or battery explosion.

Continuous usage at Turbo brightness level in hot or poor heat dissipation environments

may cause activation of overheat protection, or light beam trembling. To maintain normal

usage, lower brightness level to cool down the flashlight.

Long-term use can result in O-ring wear. To maintain a proper watertight seal, replace the

ring with an approved spare．

Periodic cleaning of the battery contacts improves the lamp's performance as dirty contacts

may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following

reasons:

A: The battery needs replacing.

Solution: Replace battery (Ensure battery is inserted according to the manufacturer’s

specifications).

B: The threads, PCB board contact or other contacts are dirty.

Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.

If the above methods don't work, please refer to the warranty policy before contacting your

authorized distributor.

Warning

The flashlight is a high-intensity lighting device capable of causing eye damage to the user or

others. Avoid shining the flashlight directly into anyone’s eyes.

Inhaltsverzeichnis

Andere Fenix Taschenlampe Handbücher

Fenix

Fenix TK12 Bedienungsanleitung

Fenix

Fenix TK25 Bedienungsanleitung

Fenix

Fenix RC10 Bedienungsanleitung

Fenix

Fenix FD41 Bedienungsanleitung

Fenix

Fenix RC10 Bedienungsanleitung

Fenix

Fenix LR40R Bedienungsanleitung

Fenix

Fenix LR40R Abmessungen

Fenix

Fenix UC52 Bedienungsanleitung

Fenix

Fenix TK40 Bedienungsanleitung

Fenix

Fenix TK15UE Bedienungsanleitung

Fenix

Fenix UC30 2017 Bedienungsanleitung

Fenix

Fenix E-CP Bedienungsanleitung

Fenix

Fenix LD22 Bedienungsanleitung

Fenix

Fenix LD32 UVC Bedienungsanleitung

Fenix

Fenix PD35TAC Bedienungsanleitung

Fenix

Fenix E05R Bedienungsanleitung

Fenix

Fenix TK28 TAC Bedienungsanleitung

Fenix

Fenix E25 Bedienungsanleitung

Fenix

Fenix TK26R Bedienungsanleitung

Fenix

Fenix TK70 Bedienungsanleitung

Fenix

Fenix C7 Bedienungsanleitung

Fenix

Fenix LD32 UVC Bedienungsanleitung

Fenix

Fenix TK22UE Bedienungsanleitung

Fenix

Fenix TK72R Bedienungsanleitung

Beliebte Taschenlampe Handbücher anderer Marken

StreamLight

StreamLight PROPOLYMER 2AA Bedienungsanleitung

StreamLight

StreamLight Stinger Bedienungsanleitung

Silverline

Silverline 994024 Bedienungsanleitung

Gama Sonic

Gama Sonic 23i60065 Bedienungsanleitung

Ryobi

Ryobi RFL180M Bedienungsanleitung

RIB

RIB SPARK ACG7061 Bedienungsanleitung

Abicor Binzel

Abicor Binzel MB EVO PRO Series Bedienungsanleitung

PELI

PELI 7610 Bedienungsanleitung

Black & Decker

Black & Decker FSL18 Bedienungsanleitung

Black & Decker

Black & Decker 9506 Bedienungsanleitung

Berner

Berner 341709 Bedienungsanleitung

PELI

PELI 3415 Zone 0 Bedienungsanleitung

ADC

ADC Adlite Pro Wartungshandbuch

Fervi

Fervi 0338 Bedienungsanleitung

Milwaukee

Milwaukee M18 IL Bedienungsanleitung

Spectronics

Spectronics Spectroline LeakTracker SPI-LT Bedienungsanleitung

Larson Electronics

Larson Electronics SLEDB-110V-M Bedienungsanleitung

vulta

vulta hurricane 262 lumen fg-e15 Bedienungsanleitung