Fenix PD40R Bedienungsanleitung

Fenix PD40R Flashlight

Technical Parameters

ANSI/PLATO

FL1

General M de Flash M de

Turb High Med L w Ec Str be SOS

Output

3,000

Lumens

1,000

Lumens

350

Lumens

100

Lumens

1,000

Lumens

350

Lumens

Runtime

12min* 2h

25min

21h

15min

55h / /

Distance

200m 123m 68m 39m 16m / /

Intensity

10,000cd 3,800cd 1,150cd 380cd 65cd / /

Impact Resistance

Waterpr f

IPX-8, underwater 2m

Sp t Beam Angle 23

Spill Beam Angle 65

Access ries Lanyard, 3.6V/4500mAh power battery, spare O-ring, holster, USB charging cable

The abovementioned parameters (lab-tested by Fenix using a 3.6V/4500mAh 26650 rechargeable

Li-ion power battery) may vary between flashlights, batteries and environments.

*Due to the dual overheat protection; the runtime of Turbo is estimated.

Uses Cree XHP 70 LED with a lifespan of 50,000 hours

Powered by one 26650 rechargeable Li-ion power battery and 26650 rechargeable Li-ion

battery

138.5mm Length x 34mm Head diameter x 30mm Body diameter

126 grams (excluding battery)

Micro USB charging

Digitally regulated output maintains constant brightness

Battery level indication

Low voltage warning reminds when battery replacement is needed

Reverse polarity protection, to protect from improper battery insertion

Intelligent overheat protection to prevent high surface temperature

Made of durable aircraft-grade aluminum

Premium type Ⅲ hard-anodized anti-abrasive finish

Toughened ultra-clear glass lens with anti-reflective coating

Operati n Instructi n

Master switch: controls General mode and output selection

Auxiliary switch: controls Flash mode and output selection

ON/OFF

With the light off, long press the master switch for 0.5 seconds to activate the General mode,

long press the auxiliary switch for 0.5 seconds to activate the Flash mode.

With the light on, long press either switch for 0.5 seconds to turn off the light.

M de Switching

In General mode, single click the auxiliary switch to activate Flash mode.

In Flash mode, single click the master switch to activate General mode.

Output Selecti n

In General mode, single click the master switch to cycle through Eco→Low→Med→High→Turbo.

In Flash mode, single click the auxiliary switch to cycle through Strobe→SOS.

L ck- ut Functi n

Lock: Simultaneously press the two switches over 3 seconds (when the light is unlocked); the light

will flash on Low brightness level twice, indicating the light is locked.

Unlock: Simultaneously press the two switches for over 3 seconds (when the light is locked); the

flashlight will be unlocked and turned on the last used output level.

In locked status, a single press on either switch, the light will flash at Low brightness level twice

to remind it’s locked.

Intelligent Mem ry Circuit

The flashlight memorizes the last brightness level used in the General mode. The next time it is

turned on, it will recall the previously used General brightness level.

Battery Level Indicati n

When the light is turned off, the battery level indicator around the switches will display the

battery status for 3 seconds.

Green light constantly on: sufficient

Red light constantly on: poor

Red light flashes: critical

Dual-pr tecti n Functi n

Time c ntr l: The light will gradually step down in lumen output from Turbo to High after 1.5

working minutes.

Heat c ntr l: The light will accumulate a lot of heat when Turbo output level is repeatedly

selected for extended periods. When the light reaches a temperature of 65 , it will℃

automatically downshift to High output level.

L w P wer Warning Functi n

When the battery level gets low, the battery level indicator will flash automatically to remind of

charging. To ensure normal use, the flashlight will not turn off and will work until the over-

discharge function stops the battery from working.

Charging

1. Plug the USB side of the charging cable into an electrical outlet; open the anti-dust cover, then

plug the Micro USB side of the charging cable into the light. The indicator light around the switch

will display red while charging, and will turn to solid green when fully charged. The normal

charging time is about 4.5 hours. Recommended voltage/current: 5V/2A.

2. Once charging is completed, be sure to close the anti-dust cover.

3. If emergency lighting is needed while in charging process, the flashlight can be used on Low

output level.

4. Recharge a stored PD40R every four months to maintain optimum battery performance.

Battery Specificati ns

Type Dimensi ns N minal

V ltage Usability

ARB-L26-4500P 26650 3.6V Recommended √√

Rechargeable

Battery

(Li-ion)**

26650 3.7V Usable* √

*The compatible rechargeable 26650 Li-ion battery only activates the flashlight up to High output

level.

**26650 Li-ion batteries are powerful cells designed for commercial applications and must be

treated with caution and handled with care. Quality batteries with circuit protection will reduce

the potential for combustion or explosion but cell damage or short circuiting are potential risks

to the user.

Battery Replacement

Unscrew the tail cap to insert the battery with the anode side (+) towards the light head, then

screw the tail cap back on.

Usage and Maintenance

Disassembling the sealed head can cause damage to the light and will void the warranty.

Fenix recommends using excellent quality battery. If the light will not be used for an

extended period, remove the battery, or the light could be damaged by electrolyte leakage

or battery explosion.

Long-term use can result in O-ring wear. To maintain a proper watertight seal, replace the

ring with an approved spare．

Periodic cleaning of the battery contacts improves the lamp's performance as dirty contacts

may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following

reasons:

A: The battery needs replacing.

Solution: Replace battery (Ensure battery is inserted according to the manufacturer’s

specifications).

B: The threads, PCB board contact or other contacts are dirty.

Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.

If the above methods don't work, please refer to the warranty policy before contacting your

authorized distributor.

Warning

The flashlight is a high-intensity lighting device capable of causing eye damage to the user or

others. Avoid shining the flashlight directly into anyone’s eyes.

Inhaltsverzeichnis

Andere Fenix Taschenlampe Handbücher

Fenix

Fenix FD30 Technisches Handbuch

Fenix

Fenix TK15 Bedienungsanleitung

Fenix

Fenix E-CP Bedienungsanleitung

Fenix

Fenix LD05 Bedienungsanleitung

Fenix

Fenix PD35TAC Bedienungsanleitung

Fenix

Fenix UC30 2017 Bedienungsanleitung

Fenix

Fenix LD02 V2.0 Bedienungsanleitung

Fenix

Fenix TK40 Bedienungsanleitung

Fenix

Fenix LD32 UVC Bedienungsanleitung

Fenix

Fenix RC10 Bedienungsanleitung

Fenix

Fenix E25 Bedienungsanleitung

Fenix

Fenix TK22UE Bedienungsanleitung

Fenix

Fenix PD20 Bedienungsanleitung

Fenix

Fenix TK45 Bedienungsanleitung

Fenix

Fenix TK40 Bedienungsanleitung

Fenix

Fenix TK15UE Bedienungsanleitung

Fenix

Fenix PD36R Bedienungsanleitung

Fenix

Fenix RC09 Bedienungsanleitung

Fenix

Fenix E-SPARK Bedienungsanleitung

Fenix

Fenix MC11 Bedienungsanleitung

Fenix

Fenix LD22 Bedienungsanleitung

Fenix

Fenix TK41 Bedienungsanleitung

Fenix

Fenix UC52 Bedienungsanleitung

Fenix

Fenix RC10 Bedienungsanleitung

Beliebte Taschenlampe Handbücher anderer Marken

StreamLight

StreamLight PROPOLYMER 2AA Bedienungsanleitung

StreamLight

StreamLight Stinger Bedienungsanleitung

Silverline

Silverline 994024 Bedienungsanleitung

Gama Sonic

Gama Sonic 23i60065 Bedienungsanleitung

Ryobi

Ryobi RFL180M Bedienungsanleitung

RIB

RIB SPARK ACG7061 Bedienungsanleitung

Abicor Binzel

Abicor Binzel MB EVO PRO Series Bedienungsanleitung

PELI

PELI 7610 Bedienungsanleitung

Black & Decker

Black & Decker FSL18 Bedienungsanleitung

Black & Decker

Black & Decker 9506 Bedienungsanleitung

Berner

Berner 341709 Bedienungsanleitung

PELI

PELI 3415 Zone 0 Bedienungsanleitung

ADC

ADC Adlite Pro Wartungshandbuch

Fervi

Fervi 0338 Bedienungsanleitung

Milwaukee

Milwaukee M18 IL Bedienungsanleitung

Spectronics

Spectronics Spectroline LeakTracker SPI-LT Bedienungsanleitung

Larson Electronics

Larson Electronics SLEDB-110V-M Bedienungsanleitung

vulta

vulta hurricane 262 lumen fg-e15 Bedienungsanleitung