Ferno Kit 069-5796 Bedienungsanleitung

Side Extension Panel 069-5796 and 000SEPKIT Kit 069-5796 and 000SEPKIT

Side Extension Panel

for Ferno® Embalming Tables

Kit 069-5796 Side Extension Panel

Description

Kit 069-5796 includes a Side Extension Panel (SEP), two support arms, and the instructions to assemble and use a SEP with

a Ferno®101-H, 102, or 103 embalming table. The SEP is designed to provide additional width to an embalming table for

bariatric use and also serves as a splash guard.

Kit 000SEPKIT is for a Ferno®101-H embalming table only, and includes two sets of kit 069-5796 as well as two sets of kit

069-5797 (SEP storage kit for Ferno®101-H embalming tables). Please refer to manual 234-3497 for instructions on how to

install the SEP storage kit.

Parts Supplied (069-5796)*

1 ea Side Extension Panel (SEP) Assembly

2 ea Support Arm Assembly

Note:Kit 000SEPKIT contains two sets of the components listed above, plus two sets of the components of kit 069-5797. Please

refer to manual 234-3497 for instructions on how to install the SEP storage kit for a Ferno®101-H embalming table.

2© Ferno-Washington, Inc 234-3488-00 April 2012

Side Extension Panel 069-5796 and 000SEPKIT

069-5796 Kit Components

Side Extension Panel (SEP) Assembly

(1)

Support Arm Assembly

(2)

Rubber

Stopper

Metal

Latch Lock

Plunger

Spring Key

Spring-

Loaded Pin

Note:Kit 000SEPKIT contains two sets of the components listed above.

Side Extension Panel 069-5796 and 000SEPKIT

1. Place the SEP on a surface bottom side up (Figure 1).

Figure 1 - Place SEP Bottom Side Up

Figure 2 - Attach a Support Arm Assembly to the SEP

Align the Pin

With the Hole

Press Down

Latch

Figure 3 - Attach the SEP to the Embalming Table

Figure 4 - Verify the Rubber Stopper is Firmly Resting

Against the Bottom of the Embalming Table

1  ASSEMBLE AND ATTACH THE SEP

2. Align the spring-loaded pin in the Support Arm

Assembly with the hole in the SEP (Figure 2).

3. To release the latch, pull the ring, and then press the

latch down.

4. While applying downward pressure, press the latch on

the Support Arm Assembly down to snap the Support

Arm Assembly into place (Figure 2).

5. Once snapped in, pull upwards on the Support Arm

Assembly to verify that it locked into place.

6. Repeat steps 2-5 on the opposite end of the SEP.

7. To attach the SEP assembly to the embalming table,

simultaneously press each metal latch lock while

sliding the Support Arm Assembly onto the embalming

table (Figure 3).

Hole Hole

Metal Latch

Lock

8. Verify that both rubber stoppers of each support arm

assembly are rmly resting against the bottom of the

embalming table.

Pull the Ring

4© Ferno-Washington, Inc 234-3488-00 April 2012

Side Extension Panel 069-5796 and 000SEPKIT

9. If the rubber stopper is not against the bottom of the

embalming table, turn the wingnut counterclockwise

to loosen the assembly (Figure 5).

Figure 5 - Loosen the Wingnut

10. Adjusttherubberstopperby turningitcounterclockwise

till it rmly rests against the bottom of the embalming

table (Figure 6).

Figure 6 - Adjust the Rubber Stopper

11. Once adjusted, re-tighten the wingnut by turning it

clockwise (Figure 7).

Figure 7 - Re-Tighten the Wingnut

12. The attached SEP will look like the one in Figure 8.

Figure 8 - SEP Attached to the Embalming Table

Side Extension Panel 069-5796 and 000SEPKIT

2  DISINFECT THE SEP

2.1 Disassemble the SEP

1. Pull the ring to release the latch while rmly pulling

the support arm assembly up to unlock and remove the

support arm assembly (Figure 9).

Figure 9 - Remove the Support Arm Assembly

Figure 10 - Remove the Knobs on the SEP

Figure 11 - Remove Brackets and Tubes From the SEP

2. Repeat step 1 with the second support arm assembly.

3. Loosen and remove the four threaded knobs on the

SEP (Figure 10).

4. Remove both brackets with tubes attached on the SEP

(Figure 11).

6© Ferno-Washington, Inc 234-3488-00 April 2012

Side Extension Panel 069-5796 and 000SEPKIT

2.3 Re-Assemble the SEP

1. Place the bracket of the longer tube onto the threaded

bolt near the bottom (longer end) of the SEP (Figure

12).

2. Place the bracket of the shorter tube onto the threaded

bolt near the top (shorter end) of the SEP.

2.2 Disinfect the SEP

1. Clean all surfaces of the SEP with a hard-surface

disinfectant/cleaner such as SaniZene®. Follow the

instructions on the container for application methods

and required contact time.

2. Hand wash the Support Arm Assembly with soap and

warm water. Rinse well with clear water, and dry with

a towel.

Figure 12 - Re-Attach the Tubes to the SEP

Figure 13 - Re-Attach the Knobs

3. Thread one inverted knob onto each of the bolts on

the SEP.

4. Tighten one threaded knob into each of the holes of

the tubes.

5. Use steps 2-5 on page 3 to attach the support arm

assemblies to the SEP.

Side Extension Panel 069-5796 and 000SEPKIT

NOTES

8© Ferno-Washington, Inc 234-3488-00 April 2012

Side Extension Panel 069-5796 and 000SEPKIT

Limited Warranty Statement

The products sold by Ferno are covered by a limited

warranty, which is printed on the invoice you received when

you purchased the product. Please refer to the warranty

terms as printed on your invoice. The complete terms and

conditions of the limited warranty, and the limitations of

liability and disclaimers, are also available upon request by

calling Ferno at 1.800.733.3766 or 1.937.382.1451.

Ferno Customer Relations

Customer service and product support are important

aspects of each Ferno product. For assistance or

information:

CANADA AND THE U.S.A.

Telephone (Toll-free) 1.877.733.0911

Telephone 1.937.382.1451

Fax (Toll-free) 1.888.388.1349

Fax 1.937.382.1191

Internet www.ferno.com

ALL OTHER LOCATIONS

For assistance or information, please contact your Ferno

distributor. If you do not have a Ferno distributor, please

contact Ferno Customer Relations:

Telephone +1.937.382.1451

Fax +1.937.382.6569

Internet www.ferno.com

Ferno-Washington, Inc.

70 Weil Way

Wilmington, Ohio 45177-9371

Repairs or Parts

EMSAR®is the only organization

authorized by Ferno to manage,

service, and repair Ferno products.

Telephone (Toll-free) 1.800.73.EMSAR

Telephone (Worldwide) 1.937.383.1052

Fax (Worldwide) 1.937.383.1051

Internet www.EMSAR.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ferno Medizinische Geräte Handbücher

Ferno

Ferno Viper Stretcher Bedienungsanleitung

Ferno

Ferno 24 MAXX Bedienungsanleitung

Ferno

Ferno 082-1997 Bedienungsanleitung

Ferno

Ferno 24 MAXX Bedienungsanleitung

Ferno

Ferno Mondial MB64 Bedienungsanleitung

Ferno

Ferno 26-S Bedienungsanleitung

Ferno

Ferno PROFlexX Bedienungsanleitung

Ferno

Ferno 125 Bedienungsanleitung

Ferno

Ferno EZ Glide 59-T Bedienungsanleitung

Ferno

Ferno Pedi Mate 678 Bedienungsanleitung

Ferno

Ferno AS-190 Bedienungsanleitung

Ferno

Ferno 28-Z PROFlexx Bedienungsanleitung

Ferno

Ferno Ultra Care 4000 Bedienungsanleitung

Ferno

Ferno FL1 Bedienungsanleitung

Ferno

Ferno Multi-Stretcher Pedi-Mate BRH-678-MS Bedienungsanleitung

Ferno

Ferno 50-E Bedienungsanleitung

Ferno

Ferno POWERFlexx Bedienungsanleitung

Ferno

Ferno SCOOP EXL Stretcher Betriebsanleitung

Ferno

Ferno Stretcher Series Bedienungsanleitung

Ferno

Ferno 30-NM Bedienungsanleitung

Ferno

Ferno Mobile Transporter 35A Series Bedienungsanleitung

Ferno

Ferno RS5 Bedienungsanleitung

Ferno

Ferno PEZO2 Bedienungsanleitung

Ferno

Ferno Pedi-Mate 678 Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung