Festo CPX-4AE-4AA-H Bedienungs- und Montageanleitung

en Description

8083250

2017-12

[8083252]

Terminal CPX

CPX-4AE-4AA-H

2 Festo – CPX-4AE-4AA-H – 2017-12

Translation of the original instructions

E/A-Modul CPX-4AE-4AA-H-EN

HART®, Torx®are registered trademarks of the respective trademark owners in certain countries.

Other symbols:

Note

Material damage or loss of function

Recommendations, tips, references to other documentation

Text designations:

 Activities that may be carried out in any order

1. Activities that should be carried out in the order stated

– General lists

èResult of an action/References to more detailed information

CPX-4AE-4AA-H

Festo – CPX-4AE-4AA-H – 2017-12 English 3

Table of contents

1 About this document 5......................................................

1.1 Further applicable documents 5...............................................

1.2 Product labelling 6..........................................................

1.3 Specified standards 6.......................................................

2 Safety 7..................................................................

2.1 General safety information 7..................................................

2.2 Intended use 7.............................................................

2.3 Training of specialised personnel 8.............................................

3 Additional information 8.....................................................

4 Service 8.................................................................

5 Product overview 8.........................................................

5.1 Function 8.................................................................

5.2 Structure of analogue module 9...............................................

5.3 Connection block 10..........................................................

5.3.1 Types 10...........................................................

5.3.2 Connection and display components 11..................................

5.4 Product-specific terms and abbreviations 12......................................

6 Mounting 13...............................................................

6.1 General instructions 13.......................................................

6.2 Mechanically coding the connection block 13......................................

6.3 Mounting the electronics module and connection block 16...........................

6.4 Dismounting the electronics module and connection block 17........................

7 Installation 18..............................................................

7.1 Prerequisites for installation 18................................................

7.2 Power supply 18.............................................................

7.3 Changing the configuration of the analogue current channels (DILswitches) 18..........

7.4 Electrical system 21..........................................................

7.4.1 Notices regarding the cable connection 21...............................

7.4.2 Attaching connecting cables to the connection block M12 21.................

7.4.3 Attaching connecting cables to the terminal connection block 22..............

7.4.4 Mechanically coding the terminal connection 25...........................

CPX-4AE-4AA-H

4 Festo – CPX-4AE-4AA-H – 2017-12 English

7.5 Connection scenarios 26......................................................

7.5.1 2-wire connection of passive HART transmitters 26.........................

7.5.2 3-wire connection of passive HART transmitters 26.........................

7.5.3 4-wire connection of active HART transmitters 27..........................

7.5.4 2-wire connection of passive HART actuators 27...........................

7.5.5 4-wire connection of active HART actuators 28............................

8 Commissioning 29...........................................................

8.1 Requirements for commissioning 29.............................................

8.2 Process image and address space allocation 29....................................

8.3 HART variables 30...........................................................

8.4 Parameterisation 31.........................................................

8.4.1 Recommended parameterisation sequence 31............................

8.4.2 Overview of parameters 32............................................

8.4.3 Description of the module and channel parameters 33......................

8.5 Data format and range of values of the actual values 46.............................

8.5.1 Data format 46.....................................................

8.5.2 Input 4 … 20 mA - fixed data format 47...................................

8.5.3 Input 4 … 20 mA – scalable data format 47................................

8.5.4 Input 0 … 20 mA – fixed data format 48..................................

8.5.5 Input 0 … 20 mA – scalable data format 48................................

8.5.6 Output 4 … 20 mA – fixed data format 49.................................

8.5.7 Output 4 … 20 mA – scalable data format 49..............................

8.5.8 Output 0 … 20 mA – fixed data format 50.................................

8.5.9 Output 0 … 20 mA – scalable data format 50..............................

8.6 Scaling the range of values 51..................................................

9 Diagnostics 52..............................................................

9.1 General remarks 52..........................................................

9.2 Error messages 53...........................................................

9.3 LED indicator 55.............................................................

10 Technical data 57............................................................

Index 59........................................................................

CPX-4AE-4AA-H

Festo – CPX-4AE-4AA-H – 2017-12 English 5

1 About this document

This document describes the mode of operation, mounting, installation and commissioning of the

product. Certain aspects of use are described in other documents and must be observed

è1.1 Further applicable documents.

1.1 Further applicable documents

For all available product documentation èwww.festo.com/pk

Document Table of contents

Brief description Instructions and important information on use

and safe application

Description of system CPX (CPX-SYS) Mode of operation, mounting, installation and

commissioning of CPX terminals

Description of bus node Commissioning, parameterisation and

diagnostics of terminal CPX with the bus node

Documentation for the components and the

connected peripherals

Usage of components

Documentation for the higher-order controller

and the additional participants in the network

Commissioning and parameterisation of the

components

Operating conditions for explosion protection For product versions with corresponding

approval: operating conditions in potentially

explosive atmospheres

Tab. 1 Further applicable documents

CPX-4AE-4AA-H

6 Festo – CPX-4AE-4AA-H – 2017-12 English

1.2 Product labelling

1Data Matrix Code

2Revision code

314-character serial number

4Production time period (encoded)

5Part number

6Product description

Fig. 1 Product label – example

The product label is located on the top of the fibre-optic cable èFig. 3.

Scanning the printed Data Matrix Code with an appropriate device calls the Festo Support Portal, with

information appropriate for the product. Alternatively, the Product Key (11-digit alphanumeric code on

the product label) can be entered in the search field of the Support Portal.

1.3 Specified standards

Version status

NAMUR NE43:2003-02

Tab. 2 Specified standards

CPX-4AE-4AA-H

Festo – CPX-4AE-4AA-H – 2017-12 English 7

2 Safety

2.1 General safety information

 Only use the product if it is in perfect technical condition.

 Observe product labelling.

 Take into consideration the ambient conditions at the location of use.

 Prior to mounting, installation and maintenance work: switch off the power supply.

 Observe the handling specifications for electrostatically sensitive devices.

 Seal unused connections with cover caps to achieve the required degree of protection.

 Use connection hardware with the required degree of protection.

 Store the product in a cool, dry, UV-protected and corrosion-protected environment.

Ensure that storage times are kept to a minimum.

2.2 Intended use

The analogue module is determined only for use in terminal CPX and terminal CPX-P of Festo.

 Operate the product only at suitable bus nodes CPX èTab. 3.

Connect a maximum of 5 analogue modules with HART functionality to the bus nodes CPX-FB13

(PROFIBUS).

 Use only permissible combinations of module components èTab. 4.

 The product may only be used in its original status without unauthorized modifications.

Only the conversions or modifications described in this and further applicable documents

arepermitted.

 Use the product only in an industrial environment. Outside of industrial environments, e.g. in

commercial and mixed-residential areas, actions to suppress interference may have to be taken.

Bus node Required revision

CPX-FB13 (PROFIBUS) from Rev 34

CPX-FB33 (PROFINET IO) from Rev 33

CPX-M-FB34 (PROFINET IO) from Rev 33

CPX-M-FB35 (PROFINET IO) from Rev 33

Tab. 3 Suitable bus nodes and required revisions

Interlinking block Connection block

CPX-P-AB-4XM12-4POL

Connection block

CPX-P-AB-2XKL-8POL

Metal version Permissible Permissible

Plastic version Not permissible Permissible

Tab. 4 Permissible combination of connection block and interlinking block

CPX-4AE-4AA-H

8 Festo – CPX-4AE-4AA-H – 2017-12 English

2.3 Training of specialised personnel

This document is intended for qualified personnel. Experience with electrical control systems is

required in order to understand this documentation.

3 Additional information

– Accessories èwww.festo.com/catalogue

– Spare parts èwww.festo.com/spareparts

– Documents and literature èwww.festo.com/sp

4 Service

Contact your regional Festo contact person if you have technical questions èwww.festo.com

5 Product overview

5.1 Function

The analogue module with HART functionality provides analogue current inputs and current outputs

and enables the recording and further processing of analogue current signals.

– 4 analogue current channels, configurable as input or output by DIL switch

– LED indicators for status and fault indications on the module

– Error control parameterisable

– Scalable range of values (16 bits)

– Channel-wise signal range configurable:

– Without HART: 0 … 20 mA or 4 … 20 mA

– With HART: 4 … 20 mA

– Connection of the following field devices possible:

– 2-, 3- or 4-wire sensors

– 2-, 3- or 4-wire actuators

– HART functionality according to HART Communication Protocol Specification 7.5

– Support of the HART protocol in versions 5, 6 and 7

CPX-4AE-4AA-H

Festo – CPX-4AE-4AA-H – 2017-12 English 9

5.2 Structure of analogue module

1Connection block

2Electronics module

3Interlinking block with contact rails

Fig. 2 Structure of the analogue module — example

Module component Description

Connection block – Provides the connections for field devices èChap. 5.3.

Electronics module – Contains the electronic components of the module

– Connects to the connection block and interlinking block through the

plug connector

Interlinking block – Housing bottom part for electrical and mechanical linking of the

CPXmodules

– Variant with connection possible for operating and load voltage

– Mounting option for entire terminal CPX

Tab. 5 Module components of analogue module

CPX-4AE-4AA-H

10 Festo – CPX-4AE-4AA-H – 2017-12 English

5.3 Connection block

5.3.1 Types

Connection block type Description

M12 connection block

– 4 M12 sockets, 4-pin

– For round plug connector M12x1 and SPEEDCON M12

– Screening possible using metal thread

CPX-P-AB-4XM12-4POL

Terminal connection block

– 2 pin strips COMBICON, 8-pin

– For terminal strips in spring-loaded and screw terminal technology

CPX-P-AB-2XKL-8POL

Tab. 6 Connection blocks

Andere Handbücher für CPX-4AE-4AA-H

Inhaltsverzeichnis

Andere Festo Steuereinheit Handbücher

Festo

Festo MS6N-SV-***-E-ASIS Series Bedienungsanleitung

Festo

Festo CPX-M-FB20 Stücklistenhandbuch

Festo

Festo CAMC-G-S1 Bedienungsanleitung

Festo

Festo CDVI5.0 Bedienungsanleitung

Festo

Festo CPA-SC Series Bedienungsanleitung

Festo

Festo CPX-CMIX-M1-1 Stücklistenhandbuch

Festo

Festo CPX-FVDA-P2 Bedienungsanleitung

Festo

Festo VZXA-K Bedienungs- und Wartungshandbuch

Festo

Festo VOFA-L26-T52-M Series Bedienungsanleitung

Festo

Festo SPC200-MMI-DIAG Stücklistenhandbuch

Festo

Festo HSW-x-AP Series Bedienungsanleitung

Festo

Festo CPX Series Bedienungsanleitung

Festo

Festo Compact Performance Series Betriebsanleitung

Festo

Festo SPC200-COM-PDP Bedienungsanleitung

Festo

Festo VZWP-L-M22C-P4 Series Bedienungsanleitung

Festo

Festo FSSC-12 Bedienungsanleitung

Festo

Festo CPX-E-EC Bedienungsanleitung

Festo

Festo VMPA1-HS Bedienungsanleitung

Festo

Festo VPCB T22Series Bedienungsanleitung

Festo

Festo VZWP-L-M22C Series Bedienungsanleitung

Festo

Festo VYKB-F10 Bedienungsanleitung

Festo

Festo CPV-D102 Bedienungsanleitung

Festo

Festo CP-E16 Series Bedienungsanleitung

Festo

Festo CPX-FVDA-P Bedienungs- und Montageanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung

Flyron

Flyron FN-BC04 Bedienungsanleitung