Festo CPX-FVDA-P Bedienungs- und Montageanleitung

Description

Output module

CPX-FVDA-P

with

connection block

CPX-M-AB-4-M12X2

-5POLE

and

interlinking block

CPX-M-GE-EV-FVO

570844

en 1303a

[8023314]

CPX terminal

Output module CPX-FVDA-P

Contents and general instructions

Festo P.BE-CPX-FVDA-P-EN en 1303a English

Translation of the original instructions

Original de.......................................

Version en 1303a..................................

Designation P.BE-CPX-FVDA-P-EN.....................

Order number 570844..............................

E(Festo AG & Co., 73726 Esslingen, Germany, 2013)

Internet: http://www.festo.com

E-Mail: service_international@festo.com

Reproduction, distribution or sale of this document or com-

munication of its contents to others without express author-

ization is prohibited. Offenders will be liable for damages.

design patent is registered.

Contents and general instructions

Festo P.BE-CPX-FVDA-P-EN en 1303a English

PROFINET IO

,PROFIBUS

are registered trademarks of

the respective trademark owners in certain countries.

Contents and general instructions

III

Festo P.BE-CPX-FVDA-P-EN en 1303a English

Table of contents

Important user instructions VI..............................................

General safety instructions VIII...............................................

Intended use VIII..........................................................

Possible incorrect application XI............................................

Attainable safety level XIII...................................................

Requirements for product use XIII............................................

Failures due to common cause (common cause failure – CCF) XV..................

Service XV...............................................................

Range of application and certifications XVI.....................................

Product identification XVII...................................................

Transport and storage conditions XX.........................................

Instructions on this description XXI...........................................

Product specific terms and abbreviations XXII...................................

1. System overview CPX-FVDA-P 1-1....................................

1.1 CPX terminal with output module CPX-FVDA-P 1-3.......................

1.1.1 Design of the output module CPX-FVDA-P 1-6....................

1.1.2 Supported product designs from CPX 1-10.......................

1.1.3 Required bus topology (control loop system) 1-11.................

1.2 Addressing 1-13....................................................

1.2.1 Bit pattern of the output and input data (F-user data) 1-14..........

1.3 Mode of operation of the output module 1-19............................

1.3.1 Application ranges (examples) 1-20.............................

1.4 Requirements for actuators (CH0 ... CH2) 1-23............................

2. Installation 2-1...................................................

2.1 General instructions on installation 2-3................................

2.2 Connecting the cables and plugs to the connection block 2-3..............

2.3 Electrical connection and display components 2-5.......................

2.3.1 Pin allocation with M12 connection block 2-6....................

Contents and general instructions

Festo P.BE-CPX-FVDA-P-EN en 1303a English

3. Commissioning 3-1................................................

3.1 General instructions 3-3.............................................

3.2 Commissioning 3-5.................................................

3.2.1 Preparing for commissioning 3-5..............................

3.2.2 Set PROFIsafe address 3-5...................................

3.2.3 Commissioning steps 3-8....................................

3.3 Set PROFIsafe parameter of the output module CPX-FVDA-P 3-9............

3.4 CPX module parameter of the output module CPX-FVDA-P 3-10..............

3.4.1 CPX module parameters CPX-FVDA-P in detail 3-12................

3.4.2 Parameterisation and signal display with the handheld (MMI) 3-16...

3.5 Notes on operation 3-18..............................................

3.5.1 Start behaviour of the output module 3-18.......................

3.5.2 Reaction to faults 3-18........................................

3.6 Configuration with Siemens STEP 7 (example). 3-19.......................

3.6.1 Addressing example 3-23.....................................

4. Diagnostics and error handling 4-1...................................

4.1 Summary of diagnostics options 4-3...................................

4.2 Possible error messages of the output module CPX-FVDA-P 4-4............

4.3 Diagnostics via LEDs 4-6............................................

4.3.1 Error handling and parameterisation 4-9........................

4.3.2 Behaviour during the switch-on phase (startup phase) 4-11.........

4.3.3 Normal operating status 4-11..................................

4.3.4 Behaviour in the event of an error 4-12..........................

4.4 Diagnostics via the CPX bus node 4-13..................................

4.4.1 Diagnostics with the handheld CPX-MMI 4-13.....................

5. Dismantling, assembly, repair and disposal 5-1........................

5.1 General instructions 5-3.............................................

5.2 Dismounting and mounting the electronics module 5-5...................

5.3 Repair 5-7........................................................

5.4 Disposal 5-7......................................................

Contents and general instructions

Festo P.BE-CPX-FVDA-P-EN en 1303a English

A. Technical appendix A-1.............................................

A.1 Technical data for output module CPX-FVDA-P A-3.......................

A.2 Technical data of the connection block A-7..............................

A.3 Technical data - interlinking block A-8..................................

B. Index B-1.........................................................

B.1 Index B-3.........................................................

Contents and general instructions

Festo P.BE-CPX-FVDA-P-EN en 1303a English

Important user instructions

Danger categories

This description includes instructions on the possible dangers

which can occur if the product is used incorrectly. These in-

structions are marked with a signal word (Warning, Caution,

etc.), printed on a shaded background and marked addition-

ally with a pictogram. A distinction is made between the fol-

lowing danger warnings:

Warning

... means that failure to observe this instruction may result

in serious personal injury or material damage.

Caution

... means that failure to observe this instruction may result

in personal injury or material damage.

Note

... means that failure to observe this instruction may result

in material damage.

In addition, the following pictogram marks passages in the

text which describe activities with electrostatically sensitive

devices:

Electrostatically sensitive devices: Incorrect handling may

cause damage to devices.

Contents and general instructions

VII

Festo P.BE-CPX-FVDA-P-EN en 1303a English

Marking of special information

The following pictograms mark passages in the text which

contain special information.

Pictograms

Information:

Recommendations, tips and references to other information

sources.

Accessories:

Specifications on necessary or useful accessories for the

Festo product.

Environment:

Information on the environmentally friendly use of Festo

products.

Text designations

•

Bullets denote activities that may be carried out in any

desired order.

1. Numerals denote activities that must be carried out in the

sequence specified.

– Arrowheads indicate general lists.

Contents and general instructions

VIII

Festo P.BE-CPX-FVDA-P-EN en 1303a English

General safety instructions

Warning

Nonobservance of safety regulations can result in death,

serious injuries or high material damage.

•

Ensure to comply with the safety regulations.

Note

Electronic modules include electrostatically sensitive

devices. Incorrect handling can cause damage to the elec-

tronics modules.

•

Observe the handling specifications for electrostatically

sensitive devices.

•

Discharge yourself from static discharges before in-

stalling or disassembling modules to protect the mod-

ules.

Observe the regulations for the electrical supply of CPX ter-

minals in the CPX system description (Protective Extra-Low

Voltage, PELV).

Intended use

The module can be used as intended to achieve the safety

function

– Safe shut off of connected consumers

if in the off state the connected consumers go into the safe

state.

Andere Handbücher für CPX-FVDA-P

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Festo Steuereinheit Handbücher

Festo

Festo CP-FB13-E Stücklistenhandbuch

Festo

Festo CPX-FB13 Stücklistenhandbuch

Festo

Festo CPV-DI02 Stücklistenhandbuch

Festo

Festo VZXA-***-M Series Bedienungsanleitung

Festo

Festo VAEM-V-S8EPRS2 Bedienungsanleitung

Festo

Festo FSSC-12 Bedienungsanleitung

Festo

Festo DG Series Bedienungsanleitung

Festo

Festo CPX Series Stücklistenhandbuch

Festo

Festo CP-FB13-E Stücklistenhandbuch

Festo

Festo Smart cubic CPVSC1-VI Bedienungsanleitung

Festo

Festo CPX-E- DI Series Stücklistenhandbuch

Festo

Festo HSP AE Series Bedienungsanleitung

Festo

Festo MS6-SV Series Bedienungsanleitung

Festo

Festo CPE-10-PRS series Bedienungsanleitung

Festo

Festo VSNZ-FT-T32C-M-F-P1-T Series Bedienungsanleitung

Festo

Festo CPX Series Bedienungsanleitung

Festo

Festo VZXA-C/W-M-V4 Series Bedienungsanleitung

Festo

Festo CPA VI Series Bedienungsanleitung

Festo

Festo HMP AD Series Bedienungsanleitung

Festo

Festo MS9-SV-10V24P Bedienungsanleitung

Festo

Festo CPA-SC Series Bedienungsanleitung

Festo

Festo MS6-SV-...-E-10V24 Series Bedienungsanleitung

Festo

Festo Compact Performance CP-FB6-E Bedienungsanleitung

Festo

Festo VZQA-C-M22C-6-GG-V2V4E-2 Stücklistenhandbuch

Beliebte Steuereinheit Handbücher anderer Marken

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung

Flyron

Flyron FN-BC04 Bedienungsanleitung