Festo 03-B Bedienungsanleitung

Electronics

Manual

Valve terminal with

field bus connection

module for

DeviceNet

Typ IDN-03-8A

Manual

193 644 GB

0003NH

Valve terminal type 03/04-B

Contents and general safety instructions

Festo P.BE-VIDN-03-8A-GB 0003NH

Author S. Breuer..................................

Editors H.–J. Drung, M.Holder........................

Translation D. Smith................................

Layout Festo AG & Co., Dept. KG-GD...................

Type setting KI-TD..................................

Edition 0003NH...................................

Title Manual......................................

Designation P.BE-VIDN-03-8A-GB....................

Order no. 193 644 GB..............................

E(Festo AG & Co., D–73726 Esslingen,

Federal Republic of Germany, 2000)

Internet: http://www.festo.com

E-Mail: [email protected]

The copying, distribution and utilization of this document

as well as the communication of its contents to others

without expressed authorization is prohibited. Offenders

will be held liable for the payment of damages. All rights

reserved, in particular the right to carry out patent, utility

model or ornamental design registration.

Contents and general safety instructions

II Festo P.BE-VIDN-03-8A-GB 0003NH

Contents and general safety instructions

III

Festo P.BE-VIDN-03-8A-GB 0003NH

Contents

Designated use V........................................................

Target group VI..........................................................

Service VI...............................................................

Important user instructions VII..............................................

Abbreviations IX.........................................................

Representing the valve terminal in this manual X..............................

Other manuals for this valve terminal XI......................................

1. System summary 1-1...............................................

1.1 Summary of the valve terminal 1-3....................................

1.2 Description of the components 1-5....................................

1.3 Method of operation 1-9............................................

2. Fitting 2-1........................................................

2.1 Fitting the modules and components 2-3...............................

2.1.1 Internal earthing of the end plate 2-4..................................

2.1.2 Hat rail clamping unit (type 03) 2-6....................................

2.2 Fitting the valve terminal onto a wall (types 03 and 04B) 2-7...............

2.3 Fitting onto a hat rail (type 03) 2-9....................................

3. Installation 3-1...................................................

3.1 General installation instructions 3-3...................................

3.2 Setting the node address and the field bus baud rate 3-5..................

3.3 Connecting the valve terminal 3-9.....................................

3.3.1 Connecting cable 3-9...............................................

3.3.2 Preparing the connecting cable 3-10....................................

3.4 Selecting the power unit 3-12.........................................

3.4.1 Ascertaining the current consumption 3-14..............................

3.4.2 Connecting the load voltage for the valves 3-15...........................

3.5 Connecting the field bus 3-19.........................................

3.5.1 Fitting a terminating resistor 3-24......................................

Contents and general safety instructions

IV Festo P.BE-VIDN-03-8A-GB 0003NH

4. Commissioning 4-1................................................

4.1 Preparing the valve terminal for commissioning 4-3......................

4.1.1 Compiling the configuration list 4-3...................................

4.1.2 Address assignment of the valve terminal 4-4...........................

4.1.3 Address assignment after extension/conversion 4-7......................

4.1.4 Switching on the power supply 4-9....................................

4.2 Commissioning on the DeviceNet 4-10..................................

4.2.1 Configuring DeviceNet slave characteristics (EDS) 4-11....................

4.2.2 General information on parametrizing 4-13..............................

4.2.3 Instructions on parametrizing with RSNetWorx for DeviceNet 4-14...........

5. Diagnosis and error treatment 5-1...................................

5.1 Summary of diagnostic possibilities 5-3................................

5.1.1 Diagnosis by means of LEDs 5-4......................................

5.1.2 Normal operating status 5-5.........................................

5.1.3 Error display of the module/network status LED 5-5......................

5.1.4 LED for status display of the valve solenoid coils 5-7......................

5.1.5 Testing the valves 5-9...............................................

5.1.6 Reaction to faults in the control system 5-12.............................

5.1.7 Diagnosis on the Allen-Bradley DeviceNet 5-13...........................

A. Technical Appendix A-1.............................................

A.1 Accessories A-3....................................................

A.2 DeviceNet specifications for the valve terminal A-7.......................

A.2.1 Identity object: class code 01 (0x01) A-11...............................

A.2.2 Router object: class code 02 (0x02) A-13................................

A.2.3 DeviceNet object: class code 03 (0x03) A-13.............................

A.2.4 Assembly object: class code 04 (0x04) A-15..............................

A.2.5 Connection object: class code 05 (0x05) A-17............................

A.3 Technical specifications A-25..........................................

A.4 Index A-29.........................................................

Contents and general safety instructions

Festo P.BE-VIDN-03-8A-GB 0003NH

Designated use

The valve terminal described in this documentation may only

be used as follows:

– for controlling pneumatic actuators on the DeviceNet

Maximum 8 valve solenoid coils can be controlled. Both MIDI

and MAXI valves (type 03) as well as ISO valves sizes 1, 2 and

3 (type 04B) can be used. Special adapter plates are required

for connecting ISO valves.

Please use the valve terminal only as follows:

– as designated

– in faultless technical condition

– without unauthorized modifications.

The specified maximum values for pressures, temperatures,

electrical data, torques, etc. must be observed when addi-

tional commercially-available components such as sensors

and actuators are used.

Please observe the standards specified in the individual

chapters and comply with national and local laws and safety

regulations.

Contents and general safety instructions

VI Festo P.BE-VIDN-03-8A-GB 0003NH

Target group

This manual is directed exclusively at technicians who are

trained in control and automation technology and who have

experience in installing, commissioning and diagnosing pro-

grammable logic controllers (PLC) and field bus systems.

Service

If you have any technical problems, please contact your local

Festo Service.

Contents and general safety instructions

VII

Festo P.BE-VIDN-03-8A-GB 0003NH

Important user instructions

Danger categories

This manual contains notes on possible dangers which may

occur if the product is not used correctly. These notes are

marked (warning, caution, etc.), printed on a shaded back-

ground and also accompanied by a pictogram. A distinction is

made between the following types of danger instructions:

Warning

This means that serious injury to persons or damage to

property can occur if these instructions are not observed.

Caution

This means that injury to persons or damage to property

can occur if these instructions are not observed.

Please note

This means that damage to property can occur if these

instructions are not observed.

In addition, the following pictogram indicates passages in the

text which describe activities with electrostatically vulnerable

components:

Electrostatically vulnerable components: incorrect handling

can cause damage to components.

Contents and general safety instructions

VIII Festo P.BE-VIDN-03-8A-GB 0003NH

Marking special information

The following pictograms mark passages in the text contain-

ing special information.

Pictograms

Information:

Recommendations, tips and references to other sources of

information.

Accessories:

Details about necessary or useful accessories for the Festo

product.

Environment:

Information on the environmental-friendly use of Festo

products.

Text markings

SThe bullet marks activities which may be carried out in

any desired order.

1. Numbers indicate activities which must be carried out in

the sequence stated.

– Hyphens indicate general items.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Festo Controller Handbücher

Festo

Festo DFPD-Series Bedienungsanleitung

Festo

Festo CPX-FEC Stücklistenhandbuch

Festo

Festo CPX Montageanleitung

Festo

Festo CPX-E-CEC-***-PN Series Bedienungsanleitung

Festo

Festo SPC200 Series Bedienungsanleitung

Festo

Festo CMSX-...-C-U-F1 series Bedienungsanleitung

Festo

Festo SFC-LAC-IO Series Referenzhandbuch

Festo

Festo DAPS-2880-8000 R F Series Betriebsanleitung

Festo

Festo CMMP-AS-C2-3A Bedienungsanleitung

Festo

Festo VPPM C1 Series Bedienungsanleitung

Festo

Festo DNCKE Bedienungsanleitung

Festo

Festo DFPD-x-RS Series Bedienungsanleitung

Festo

Festo SPC200 Series Bedienungsanleitung

Festo

Festo DFPD-Series Einrichtungshandbuch

Festo

Festo VPPI S1D Series Bedienungsanleitung

Festo

Festo EduTrainer Bedienungsanleitung

Festo

Festo VPPM Series Bedienungsanleitung

Festo

Festo MPS PA Bedienungsanleitung

Festo

Festo CDSB-A1 Bedienungsanleitung

Festo

Festo s CMMD-AS-C8-3A Leitfaden

Festo

Festo CECC-X-M1 series Bedienungs- und Montageanleitung

Festo

Festo 32 MPA Bedienungsanleitung

Festo

Festo GRLZ Series Bedienungsanleitung

Festo

Festo CECC-X-M1 series Stücklistenhandbuch

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch