Festo CMMP-AS-Series-M0-STO Bedienungsanleitung

Description

Safety function STO

as per EN 61800-5-2

8042945

1412a

CMMP-AS-...-M0 – STO

Motor controller

CMMP-AS-...-M0 – STO

2 Festo – GDCP-CMMP-AS-M0-S1-EN – 1412a –

Translation of the original instructions

GDCP-CMMP-AS-M0-S1-EN

Identification of hazards and instructions on how to prevent them:

Danger

Immediate dangers which can lead to death or serious injuries.

Warning

Hazards that can cause death or serious injuries.

Caution

Hazards that can cause minor injuries or serious material damage.

Other symbols:

Note

Material damage or loss of function.

Recommendations, tips, references to other documentation.

Essential or useful accessories.

Information on environmentally sound usage.

Text designations:

 Activities that may be carried out in any order.

1. Activities that should be carried out in the order stated.

– General lists.

èResult of an action/References to more detailed information.

CMMP-AS-...-M0 – STO

Festo – GDCP-CMMP-AS-M0-S1-EN – 1412a – English 3

Table of contents – CMMP-AS-...-M0 – STO

1 Safety and requirements for product use 7......................................

1.1 Safety 7..................................................................

1.1.1 General safety information 7..........................................

1.1.2 Intended use 7.....................................................

1.1.3 Possible incorrect application 8.......................................

1.1.4 Attainable safety level,

Safety function to EN ISO 13849-1 / EN 61800-5-2 8......................

1.2 Requirements for product use 8...............................................

1.2.1 Technical requirements 9............................................

1.2.2 Qualification of the specialists (requirements for the personnel) 9............

1.2.3 Diagnostic coverage (DC) 9...........................................

1.2.4 Range of application and certifications 9................................

2 Description of the safety function STO 10........................................

2.1 Product overview 10.........................................................

2.1.1 Purpose 10........................................................

2.1.2 Interface 10........................................................

2.2 Function and application 11....................................................

2.2.1 Description of the safety function STO 11................................

2.2.2 Overview of interface [X40] 12.........................................

2.2.3 Control ports STO-A, 0V-A / STO-B, 0V-B [X40] 13..........................

2.2.4 Acknowledgment contact C1, C2 [X40] 14................................

2.2.5 Auxiliary supply 24 V, 0 V [X40] 15......................................

2.3 Functionality in motor controller CMMP-AS-...-M0 15................................

2.4 Time behaviour 17...........................................................

2.4.1 Basic time behaviour STO 17..........................................

2.4.2 Time behaviour for activating STO during operation with restart 18............

2.4.3 Time behaviour for activating SS1 during operation with restart 19............

3 Mounting and installation 21..................................................

3.1 Mounting / dismantling 21.....................................................

3.2 Electrical installation 21.......................................................

3.2.1 Safety regulations 21................................................

3.2.2 Connection [X40] 22.................................................

3.2.3 Minimum wiring for commissioning [X40] 22..............................

CMMP-AS-...-M0 – STO

4 Festo – GDCP-CMMP-AS-M0-S1-EN – 1412a – English

3.3 Typical circuits 23............................................................

3.3.1 Safe torque switch off (STO, “Safe Torque Off”) 23.........................

3.3.2 Delays and safe torque switch off (SS1, “Safe Stop 1”) 24...................

4 Commissioning 26...........................................................

4.1 Prior to commissioning 26.....................................................

4.2 Support by FCT 27...........................................................

4.2.1 Status display of the safety function 27..................................

4.2.2 Display log file of the motor controller 27................................

4.3 Performance test, validation 28.................................................

5 Operation 30...............................................................

5.1 Obligations of the operator 30.................................................

5.2 Maintenance and care 30......................................................

5.3 Protective functions 30.......................................................

5.3.1 Voltage monitoring 30................................................

5.3.2 Protection against overvoltage and reverse polarity 30......................

5.4 Diagnostics and troubleshooting 31.............................................

5.4.1 Status indicators 31.................................................

5.4.2 Error messages 31...................................................

6 Modification and replacement of the motor controller 33............................

6.1 Repair or replacement of the integrated protection circuit 33.........................

6.2 De-commissioning and waste management 33.....................................

6.3 Replacing the previous CMMP-AS series with the CMMP-AS-…-M0 33..................

A Technical appendix 35........................................................

A.1 Technical data 35............................................................

A.1.1 Safety engineering 35................................................

A.1.2 General, operating and environmental conditions CMMP-AS-...-M0 36..........

A.1.3 Electrical data [X40] 37...............................................

B Glossary 39................................................................

CMMP-AS-...-M0 – STO

Festo – GDCP-CMMP-AS-M0-S1-EN – 1412a – English 5

Instructions on this documentation

This documentation is to ensure work with the STO safety function (“Safe torque off”) is performed

safely in accordance with EN 61800-5-2 for motor controller CMMP-AS-...-M0.

 In addition, always observe the general safety regulations for the CMMP-AS-...-M0.

The general safety regulations for the CMMP-AS-...-M0 can be found in the hardware

documentation, GDCP-CMMP-M0-HW-... èTab. 2.

Observe the information regarding safety and the requirements for product use in

section 1.2.

Product identification

This documentation refers to the following versions:

– Motor controller CMMP-AS-…-M0 from Rev 04

– Firmware 4.0.1501.1.2 and higher

The representation on the rating plate can be found in the hardware description,

GDCP-CMMP-M0-HW-...

Service

Please consult your regional Festo contact if you have any technical problems.

Specified standards/guidelines

Issue status

EN 60204-1:2006-06/A1:2009-02 EN ISO 13849-1:2008-06/AC:2009-03

EN 61800-5-1:2007-09 IEC 61131-2:2007-09

EN 61800-5-2:2007-10 IEC 61508-1/.../-7:2010-04

EN 62061:2005-04/AC:2010-02/A1:2013-02

Tab. 1 Standards/directives specified in the document

CMMP-AS-...-M0 – STO

6 Festo – GDCP-CMMP-AS-M0-S1-EN – 1412a – English

Documentation

You will find additional information on the motor controller in the following documentation:

User documentation on the motor controller CMMP-AS-...-M0

Name, type Contents

Hardware description,

GDCP-CMMP-M0-HW-...

Mounting and installation for all variants/power classes

(1-phase, 3-phase), pin assignments, error messages,

maintenance.

Description of commissioning,

GDCP-CMMP-M0-FW-...

Commissioning with FCT + functional description (firmware).

Overview of FHPP, fieldbus, safety engineering.

Description FHPP,

GDCP-CMMP-M3-M0-C-HP-...

Control and parameterisation of the motor controller via the

FHPP Festo profile.

Description of CiA 402 (DS 402),

GDCP-CMMP-M3-M0-C-CO-...

Control and parameterisation of the motor controller via the

device profile CiA 402 (DS 402).

Description CAM-Editor,

P.BE-CMMP-CAM-SW-...

Cam disc function (CAM) of the motor controller.

Description of the safety function

STO, GDCP-CMMP-AS-M0-S1-...

Functional safety engineering for the motor controller with the

safety function STO.

Help for the FCT plug-in CMMP-AS User interface and functions of the CMMP-AS plug-in for the

Festo Configuration Tool.

èwww.festo.com

Tab. 2 Documentation on the motor controller CMMP-AS-...-M0

1 Safety and requirements for product use

Festo – GDCP-CMMP-AS-M0-S1-EN – 1412a – English 7

1 Safety and requirements for product use

1.1 Safety

1.1.1 General safety information

 In addition, always observe the general safety regulations for the CMMP-AS-…-M0.

The general safety regulations for the CMMP-AS-...-M0 can be found in the hardware

documentation, GDCP-CMMP-M0-HW-... èTab. 2, page 6.

Note

Loss of the safety function.

Non-observance of the environmental and connection conditions may lead to loss of

safety functions.

 Observe the specified environmental and connection conditions, in particular the

input voltage tolerances èTechnical data, Appendix A.1.

Note

Damage to the motor controller due to incorrect handling.

 Switch off the supply voltage before mounting and installation work. Switch on

supply voltage only when mounting and installation work are completely finished.

 Observe the handling specifications for electrostatically sensitive devices.

1.1.2 Intended use

The CMMP-AS-...-M0 motor controller supports the following safety function:

– “Safe torque off ” (STO) with SIL 3 according to EN 61800-5-2 / EN 62061 / IEC 61508 or

category 4 / PL e according to EN ISO 13849-1.

The CMMP-AS-...-M0 motor controller is a product with safety-relevant functions and is intended for

installation in machines or automation systems and for use as follows:

– in excellent technical condition,

– in original status without unauthorised modifications,

– within the product's limits as defined by the technical data èAppendix A.1,

– in an industrial environment.

Note

In the event of damage caused by unauthorised manipulation or other than intended

use, the guarantee is invalidated and the manufacturer is not liable for damages.

1 Safety and requirements for product use

8 Festo – GDCP-CMMP-AS-M0-S1-EN – 1412a – English

1.1.3 Possible incorrect application

The following misuses are among those not approved as intended use:

– use outdoors,

– use in the non-industrial area (residential areas),

– use in applications where switching off can result in hazardous movements or conditions.

Note

– The STO function is insufficient as the sole safety function for drives subject to

permanent torque or force (e. g. suspended loads).

– Bypassing of safety equipment is impermissible.

– Repairs to the motor controller are impermissible!

The STO (Safe Torque Off ) function does not provide protection against electric shock,

only against hazardous movements!

èHardware documentation, GDCP-CMMP-M0-HW-...

1.1.4 Attainable safety level,

Safety function to EN ISO 13849-1 / EN 61800-5-2

The CMMP-AS-...-M0 motor controller with integrated STO safety function fulfils the requirements of

– Category 4 / PL e to EN ISO 13849-1

– SIL CL 3 to EN 62061

and can be used in applications up to cat. 4 / PL e to EN ISO 13849-1 and SIL 3 to EN 61800-5-2 /

EN 62061 / IEC 61508.

The achievable safety level depends on the other components used to achieve a safety function.

1.2 Requirements for product use

 Make this documentation available to the design engineer, installer and personnel responsible for

commissioning the machine or system in which this product is used.

 Make sure that the specifications of the documentation are always complied with. When so doing,

also take into account the documentation for the other components (e. g. motors, cables, etc.).

 Take into consideration the legal regulations applicable for the destination, as well as:

– regulations and standards,

– regulations of the testing organizations and insurers,

– national specifications.

 For emergency stop applications, protection against automatic restart corresponding to the re

quired safety category must be furnished. Among other means, this can take place through an ex

ternal safety switching device.

1 Safety and requirements for product use

Festo – GDCP-CMMP-AS-M0-S1-EN – 1412a – English 9

1.2.1 Technical requirements

General conditions for the correct and safe use of the product, which must be observed at all times:

 Comply with the connection and environmental conditions of the motor controller (èAppendix A.1)

and all connected components specified in the technical data.

Only compliance with the limit values or load limits will enable operation of the product in compli

ance with the relevant safety regulations.

 Observe the instructions and warnings in this documentation.

1.2.2 Qualification of the specialists (requirements for the personnel)

The device may only be set into operation by a qualified electrotechnician who is familiar with:

– the installation and operation of electrical control systems,

– the applicable regulations for operation of safety engineering systems,

– the applicable regulations on accident protection and industrial safety, and

– the documentation for the product.

1.2.3 Diagnostic coverage (DC)

Diagnostic coverage depends on the connection between the motor controller and the control loop

system as well as the implemented diagnostic measures èSection 5.4.

If a potentially dangerous malfunction is recognised during the diagnostics, appropriate measures

must be taken to maintain the safety level.

Note

Check whether cross-circuit detection of the input circle and the connection wiring is

required in your application.

If necessary, use a safety switching device with cross-circuit detection for activation of

the safety function.

1.2.4 Range of application and certifications

The motor controller with integrated STO safety function is a safety-related part of the control systems.

The motor controller carries the CE mark.

Standards and test values which the product must comply with and fulfils can be found in the section

“Technical data” (èAppendix A.1). The product-relevant EU directives can be found in the declaration

of conformity.

Certificates and the declaration of conformity for this product can be found at

èwww.festo.com.

2 Description of the safety function STO

10 Festo – GDCP-CMMP-AS-M0-S1-EN – 1412a – English

2 Description of the safety function STO

2.1 Product overview

2.1.1 Purpose

As processes become increasingly automated, protecting people from potentially hazardous move

ments is gaining in importance. Functional safety describes the measures offered by electrical or elec

tronic devices that are required to reduce or eliminate malfunction-induced hazards. In normal opera

tion, safety devices prevent human intervention in hazardous areas. In certain operating modes, during

set-up for example, people also need to be in hazardous areas. In such situations, the machine operat

or must be protected by drive and internal control measures.

The functional safety technology integrated in the motor controller provides the conditions required by

the controller and drive for optimised realisation of the safety functions. Planning and installation com

plexity is reduced. The use of integrated functional safety technology increases machine functionality

and availability over the levels achieved by conventional safety technology.

2.1.2 Interface

The CMMP-AS-...-M0 motor controller is equipped with a digital I/O interface [X40] for control of the

STO safety function.

0 V

24 V

0V-B

STO-B

0V-A

STO-A

1Motor controller CMMP-AS-…-M0

2Digital I/O interface [X40] for control of the

STO function

3Pin 1 of the interface [X40]

Fig. 2.1 Motor controller CMMP-AS-...-M0

Inhaltsverzeichnis

Andere Festo Controller Handbücher

Festo

Festo CMXR-C2 Bedienungsanleitung

Festo

Festo LRP-1/4 Series Bedienungsanleitung

Festo

Festo ESBF-LS-32 Bedienungsanleitung

Festo

Festo LF-M Series Bedienungsanleitung

Festo

Festo SPC-10 Series Bedienungsanleitung

Festo

Festo SEC-ST-48-6-P01 Bedienungs- und Montageanleitung

Festo

Festo SPC200 Series Bedienungsanleitung

Festo

Festo FEC-FC640 Bedienungsanleitung

Festo

Festo EXCM-10-***-E Bedienungsanleitung

Festo

Festo VIFB16 Series Bedienungsanleitung

Festo

Festo SPC200 Series Bedienungsanleitung

Festo

Festo SPC11-POT-TLF Benutzerhandbuch

Festo

Festo CMMS-ST-C8-7-G2 Bedienungsanleitung

Festo

Festo CDSA-D1-VX Bedienungsanleitung

Festo

Festo ELGC-TB Series Bedienungsanleitung

Festo

Festo VZXA Series Bedienungsanleitung

Festo

Festo DFPD-Series Bedienungsanleitung

Festo

Festo VPPM-6TA-L-1-F-0L10H Bedienungsanleitung

Festo

Festo CMMP-AS Series Referenzhandbuch

Festo

Festo DFPD-Series Einrichtungshandbuch

Festo

Festo VMPA-B8-R Series Bedienungsanleitung

Festo

Festo CMXR-C1 Installationshandbuch

Festo

Festo SFC-LACI Referenzhandbuch

Festo

Festo CMXR-C2 Bedienungs- und Montageanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch