Field Controls 46334200 Bedienungsanleitung

SWG SIDEWALL POWER VENTING KIT

Installation Specifications For The Following Furnaces

Certified As A Component Part of The Furnace Application.

This instruction sheet contains OEM specific information that supercedes the provided instruction

manual where applicable. All field wiring shown in included wiring diagrams are correct regardless

whether the CK-43 or CK-43F is used.

Contents

Kit P/N Furnace Manufacturer Page

46205411 Amana Refrigeration Inc. 2

46205405 American Standard Inc. & The Trane Co. 4

46205407 Armstrong Air Conditioning Inc. 6

46205410 Bard Manufacturing Co. 7

46205403 Carrier Corp. 8

46205408 Consolidated Industries Corp. 10

46205406 Dunkirk Radiator Corp. 11

Evcon Industries Inc. 13

46205401 International Comfort Products (Adjustable) 14

46205413 International Comfort Products (Fixed) 16

46205402 Lennox International Inc. 17

46205409 Rheem Air Conditioning 18

46205404 York International Corp. 19

Field Controls, L.L.C., 2630 Airport Road, Kinston, NC 28504

Technical Support (800) 742-8368

Page 2

SWG-4AM AMANA SIDEWALL POWER VENTING KIT

Field Controls P/N 46205411

Kit Includes:

SWGII-4HD Sidewall Power Venter

CK-43 Control Kit

Includes: 4" MG-1 Barometric Draft Control

Fan Proving Switch

Adjustable Post Purge

Recommended For Use On The Following Amana Model Furnaces:

GBI GCIC GUI GUID GCI GHI GUIA

GCIA GMI GUIB GCIB GSI GUIC

NOT For Use On The Following Amana Model Furnaces:

GCIS GUIS GUIV

Furnace Configuration and Vent Pipe Restrictions

Type B-1 vent pipe shall be used to join the furnace to the venting system and for the entire length of

the venting system. Exception: Up to 24" of single wall vent pipe may be used to connect the furnace

to the barometric damper. The barometric damper tee may be single wall. Type B-1/double wall vent

pipe MUST be used from the barometric damper tee to the power venter.

For Furnace Models GUIA, GUIB, GUIC, and GUID

BTU/Hr. Diameter of

Flue Collar

on Furnace

Installer

Provided Flue

Pipe Transition

Size Diameters

Maximum

Equivalent Length

(ft.) for 4" Vent Pipe

Maximum

Equivalent Length

(ft.) for 5" Vent Pipe

46,000 4" None 100 100

69,000 4" None 100 100

92,000 4" None 100 100

115,000 4" None 85 95

138,000 4" None 65 80

For Furnace Models GCIA, GCIB, and GCIC

BTU/Hr. Diameter of

Flue Collar

on Furnace

Installer

Provided Flue

Pipe Transition

Size Diameters

Maximum

Equivalent Length

(ft.) for 4" Vent Pipe

Maximum

Equivalent Length

(ft.) for 5" Vent Pipe

46,000 3" 3" to 4" 100 100

69,000 3" 3" to 4" 100 100

92,000 3" 3" to 4" 100 100

115,000 3" 3" to 4" 85 95

138,000 3" 3" to 4" 65 80

Page 3

For Furnace Models GBI, GCI, GHI, GSI, and GUI

BTU/Hr. Diameter of

Flue Collar

on Furnace

Installer

Provided Flue

Pipe Transition

Size Diameters

Maximum

Equivalent Length

(ft.) for 4" Vent Pipe

Maximum

Equivalent Length

(ft.) for 5" Vent Pipe

45,000 3" 3" to 4" 100 100

70,000 3" 3" to 4" 100 100

90,000 3" 3" to 4" 100 100

115,000 4" None 85 95

140,000 4" None 65 80

For Furnace Models GMI

BTU/Hr. Diameter of

Flue Collar

on Furnace

Installer

Provided Flue

Pipe Transition

Size Diameters

Maximum

Equivalent Length

(ft.) for 4" Vent Pipe

Maximum

Equivalent Length

(ft.) for 5" Vent Pipe

40,000 3" 3" to 4" 100 100

60,000 4" None 100 100

80,000 4" None 100 100

100,000 4" None 100 100

120,000 4" None 80 90

140,000 4" None 60 80

General Wiring

For complete installation information refer to the Field Controls SWG-4AM Power Venter Installation

Manual for details (P/N 46333300.)

Page 4

SWG-4AT AMERICAN STANDARD AND TRANE

SIDEWALL POWER VENTING KIT

Field Controls P/N 46205405

Kit Includes:

SWGII-4HD Sidewall Power Venter

CK-43F Control Kit

Includes: 4" MG-1 Barometric Draft Control

Fan Proving Switch

Fixed post purge

For Use With The Following American Standard And Trane Furnaces:

AUD-CCUE-AADD-R

TUD-CTUE-ATDD-R

AUD-RADD-CCDE-A

TUD-RTDD-CTDE-A

Furnace Configuration And Vent Pipe Restrictions:

Furnace Input

BTU/Hr Diameter Of Vent Pipe

Collar On Furnace (In.) Maximum Equivalent

Vent Length (Ft.)

40,000 465

60,000 465

80,000 465

100,000 465

120,000 465

140,000 465

General Wiring

Refer to the Diagrams on the following page for guidance in wiring the Power Venter and Control Kit

to the appliance.

For complete installation information refer to the Field Controls SWG-4AT Power Venter Installation

Manual for details (P/N 46306700.)

Page 5

Page 6

SWG-4A ARMSTRONG SIDEWALL POWER VENTING KIT

Field Controls P/N 46205407

Kit Includes:

SWGII-4HD Sidewall Power Venter

CK-43F Control Kit

Includes: 4" MG-1 Barometric Draft Control

Fan Proving Switch

Fixed post purge

For use with Armstrong furnace models that begin with the following:

AMEG6G EG5G EG6G EG7G EG8G GCJ GHJ GUJ

Furnace Configuration and Vent Pipe Restrictions

Model

Number Configuration Furnace Vent

Collar Diameter

(in.)

Max. Equivalent Vent

Length (ft.); 4" Diameter

Vent Pipe

AMEG6G Upflow 460

EG5G Lowboy 460

EG6G Upflow 460

EG7G Downflow 460

EG8G Horizontal 441

GCJ Downflow-Horizontal 460

GHJ Upflow-Horizontal 460

GUJ Upflow 460

General Wiring

For complete installation information refer to the Field Controls SWG-4A Power Venter Installation

Manual for details (P/N 46333500.)

Page 7

SWG-4B BARD SIDEWALL POWER VENTING KIT

Field Controls P/N 46205410

Kit Includes:

SWGII-4HD Sidewall Power Venter

CK-43F Control Kit

Includes: 4" MG-1 Barometric Draft Control

Fan Proving Switch

Fixed post purge

For Use With The Following Bard Standard Furnaces:

Upflow Downflow Lowboy

IH60D36 (A,B) IC60D36A ------

IH85D48 (A,B,D) IC85D42 (A,D) IL85D42 (A,D)

IH115D48 (A,B) IC115D48A IL115D48A

IH115D60A ------ ------

IH145D60A ------ IL145D60A

Unit Selection Table:

Furnace Input

Btu/Hr Diameter Of Vent

Pipe Collar On

Furnace (In.)

Installer Provided Flue

Pipe Transition Size* Maximum Equivalent

Vent Length (Ft.)

4” Vent Pipe

58,000 3” 3”-4” 65

86,000 4” ** 3”-4” *** 65

115,000 4” None Required 65

145,000 4” None Required 65

*Transition should be attached to the furnace vent pipe collar if required.

** 86,000 Btu models with A or B suffix letter have 3” collars.

*** 86,000 Btu models with D suffix have 4” collars and do not require a 3” to 4” transition.

General Wiring

For complete

installation

information refer to

the Field Controls

SWG-4B Power

Venter Installation

Manual for details

(P/N 46332100.)

Page 8

SWGII-4CC CARRIER SIDEWALL POWER VENTING KIT

Field Controls P/N 46205403, Carrier P/N KGASW03012SP

Kit Includes:

SWGII-4HD Sidewall Power Venter

CK-43CC Control Kit

Includes: 4" MG-1 Barometric Draft Control

Fan Proving Switch

Fixed post purge

For Use With The Following Carrier Furnace Models:

58UXT 58DXT 58UXV 58UHV 58TUA 58TMA

58WAV 58ZAV 58PAV 58RAV GB1AAV GB3AAV

For Use With The Following BDP Furnace Models:

330JAV 331JAV 333JAV 333BAV330AAV 331AAV 395CAV

376CAV 383KAV 373LAV 480BAV 481BAV GB1AAV GB3AAV

For All Single-Furnace Systems:

Use one SWGII-4CC Kit for each furnace, and do not common-vent with other appliance(s). To

common-vent these furnaces with other appliances, use SWGII-4HD Kit with instruction P/N

46139100 and a CK Series Control Kit for each appliance.

For All Two-Stage furnaces:

When setting up a two-stage furnace, the furnace should be operating on HIGH-STAGE HEAT while

adjusting the sidewall power venter airflow adjustment damper, draft control, and proving switch.

VENTING INSTALLATION OPTIONS

FURNACE MODELS 4-in. dia. Type B-1 vent up

to 40 ft. long, up to 4

elbows, and 1 tee §

3-in. dia. Type B-1 vent up to 40 ft.

long, up to 4 elbows, and 1 tee §

Draft Safeguard

Switch Assembly

Two-Stage models

58UXT 330JAV

58DXT 331JAV

58UXV 333JAV

58UHV 333BAV

58TUA 330AAV

58TMA 331AAV

PERMITTED WITH ALL

GAS INPUT SIZES

A 5"-to-4" reducer is

required between furnace

and vent for inputs greater

than 105,000 Btu/hr.

PERMITTED WITH ALL GAS

INPUT SIZES ‡

A reducer is required between

furnace and vent for these inputs:

up through 105,000 Btu/hr 4"-to-3"

more than 105,000 Btu/hr 5"-to-3".

PERMITTED

WITH OR

WITHOUT THE

DRAFT

SAFEGUARD *

Single-Stage models

58WAV 395CAV

58ZAV 376CAV

58PAV 383KAV

58RAV 373LAV

GB1AAV 480BAV

GB3AAV 481BAV

PERMITTED WITH ALL

GAS INPUT SIZES

A 5"-to-4" reducer is

required between furnace

and vent for inputs greater

than 115,000 Btu/hr.

PERMITTED WITH GAS INPUTS

OF 88,000 Btu/hr AND LESS ‡

A 4"-to-3" reducer is required

between furnace and vent.

PERMITTED

ONLY WITH

THE DRAFT

SAFEGUARD †

Page 9

*The furnace's Draft Safeguard switch assembly can remain in place as installed at the factory, or

the Draft Safeguard switch assembly can be removed (relief box opening sealed with Block-off

Plate and switch replaced with Splice Connector from Kit KGASW0101/02012SP).

†The Draft Safeguard switch assembly must remain installed and operational in the furnace.

§See Equivalent Length Table II. Fewer elbows permit longer straight length & vice-versa.

‡3"-to-4" increaser is required between vent pipe and power venter.

General Wiring:

For complete installation information refer to the Field Controls SWGII-4CC Power Venter Installation

Manual for details (P/N 46295100.)

Page 10

SWG-4CD CONSOLIDATED SIDEWALL POWER VENTING KIT

Field Controls P/N 46205408

Kit Includes:

SWGII-4HD Sidewall Power Venter

WMO-1 Thermal Safety Switch (Must be purchased separately if using other venting kit on

Consolidated Furnaces.)

CK-43F Control Kit

Includes: 4" MG-1 Barometric Draft Control

Fan Proving Switch

Fixed post purge

For use with the following series of furnaces:

This furnace was built by CONSOLIDATED

INDUSTRIES under the names: QUATRO, TECH-4,

QUADPRO, QUADTECH, MULTIFLOW, BRENTWOOD,

and SUNBURST.

This furnace was built by

CONSOLIDATED INDUSTRIES

under the name PREMIER.

Model Numbers: Model Numbers:

MAA040NR2R

MAA040NR3R

MAA060NR2R

MAA060NR3R

MAA060NR4R

MAA080NR2R

MAA080NR3R

MAA080NR4R

MAA080NR5R

MAA100NR3R

MAA100NR4R

MAA100NR5R

MAA120NR4R

MAA120NR5R

MAA140NR4R

MAA140NR5R

MBA040NH2R

MBA040NH3R

MBA060NH2R

MBA060NH3R

MBA060NH4R

MBA080NH2R

MBA080NH3R

MBA080NH4R

MBA080NH5R

MBA100NH3R

MBA100NH4R

MBA100NH5R

MBA120NH4R

MBA120NH5R

MBA140NH4R

MBA140NH5R

MCA040NR2R

MCA040NR3R

MCA060NR2R

MCA060NR3R

MCA060NR4R

MCA080NR2R

MCA080NR3R

MCA080NR4R

MCA080NR5R

MCA100NR3R

MCA100NR4R

MCA100NR5R

MCA120NR4R

MCA120NR5R

MCA140NR4R

MCA140NR5R

MDA040NH2R

MDA040NH3R

MDA060NH2R

MDA060NH3R

MDA060NH4R

MDA080NH2R

MDA080NH3R

MDA080NH4R

MDA080NH5R

MDA100NH3R

MDA100NH4R

MDA100NH5R

MDA120NH4R

MDA120NH5R

MDA140NH4R

MDA140NH5R

HBA040NR3R

HBA060NR4R

HBA080NR4R

HBA100NR5R

HBA120NR5R

Note: Model numbers may have suffix "X". Note: Model numbers may have suffix "X".

This kit may also be used with furnaces manufactured by

Consolidated Industries and sold by a number of other companies

under their names.

This kit may also be used with furnaces

manufactured by Consolidated Industries and

sold by a number of other companies under

their names.

General Information:

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Field Controls Lüfter Handbücher

Field Controls

Field Controls FIELD DIRECT VENT SYSTEM REDUCING TEE Bedienungsanleitung

Field Controls

Field Controls 46457000 Bedienungsanleitung

Field Controls

Field Controls 46233500 Leitfaden

Field Controls

Field Controls 2702600 Bedienungsanleitung

Field Controls

Field Controls ventCool Bedienungsanleitung

Field Controls

Field Controls Oil Venting Systems Bedienungsanleitung

Field Controls

Field Controls 46381400 Bedienungsanleitung

Field Controls

Field Controls 46371700 Bedienungsanleitung

Field Controls

Field Controls CAS-4 Bedienungsanleitung

Field Controls

Field Controls 46385600 Bedienungsanleitung

Field Controls

Field Controls 46263300 Bedienungsanleitung

Field Controls

Field Controls 46483500 Bedienungsanleitung

Field Controls

Field Controls 1977200 Bedienungsanleitung

Field Controls

Field Controls OVD-4 Bedienungsanleitung

Field Controls

Field Controls 46261200 Bedienungsanleitung

Field Controls

Field Controls CAC-120 Bedienungsanleitung

Field Controls

Field Controls VentCool 1.7 Bedienungsanleitung

Field Controls

Field Controls 46263200 Kurzanleitung

Field Controls

Field Controls 1575700 Bedienungsanleitung

Field Controls

Field Controls 46334800 Bedienungsanleitung

Field Controls

Field Controls 27028 Bedienungsanleitung

Field Controls

Field Controls CK-63 Bedienungsanleitung

Field Controls

Field Controls 46068600 Bedienungsanleitung

Field Controls

Field Controls 46326900 Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Hinkley

Hinkley HIGHLAND Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung