Field Controls 46263400 Montageanleitung

Inhaltsverzeichnis

Andere Field Controls Lüfter Handbücher

Field Controls

Field Controls 1536760 Bedienungsanleitung

Field Controls

Field Controls OVD-4 Bedienungsanleitung

Field Controls

Field Controls ventCool Bedienungsanleitung

Field Controls

Field Controls FAPV180-AC Bedienungsanleitung

Field Controls

Field Controls 46119300 Bedienungsanleitung

Field Controls

Field Controls 46334800 Bedienungsanleitung

Field Controls

Field Controls 46284600 Bedienungsanleitung

Field Controls

Field Controls Eliminator EL-1 Bedienungsanleitung

Field Controls

Field Controls 46334200 Bedienungsanleitung

Field Controls

Field Controls 46483500 Bedienungsanleitung

Field Controls

Field Controls 46256400 Bedienungsanleitung

Field Controls

Field Controls Eliminator Bedienungsanleitung

Field Controls

Field Controls 46267300 Bedienungsanleitung

Field Controls

Field Controls 46357800 Montageanleitung

Field Controls

Field Controls FAN IN A CAN CAS4 Bedienungsanleitung

Field Controls

Field Controls 46477000 Bedienungsanleitung

Field Controls

Field Controls CAS-4 Bedienungsanleitung

Field Controls

Field Controls 27028 Bedienungsanleitung

Field Controls

Field Controls SWG Stainless Series Bedienungsanleitung

Field Controls

Field Controls 4592700 Bedienungsanleitung

Field Controls

Field Controls 206900 Bedienungsanleitung

Field Controls

Field Controls VentCool 2.4 Bedienungsanleitung

Field Controls

Field Controls 4052900 Montageanleitung

Field Controls

Field Controls 46371700 Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Hinkley

Hinkley HIGHLAND Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

SPECIAL VENTING APPLICATION

INSTALLATION SHEET FOR

AQUAHUT® WATER HEATER ENCLOSURES

This sheet covers the requirements for installing the Star-Kap™ on an Aquahut®gas water heater

enclosure. The Aquahut®enclosure is designed for the purpose of housing agas water heater

outside of the living space of a structure. These requirements are based on the A.G.A. test reports

C-FT-5-90, C-FT-8-90, FT-C-12-93, FT-C-13-93, FT-C-14-92 and the SBCCI letter dated May 24,

1990. The Aquahut®water heater enclosure is not sold or manufactured by the Field Controls Co.

These installation instructions only address the installation of the Star-Kap™, state the maximum

capacity water heater allowed in an Aquahut®and the vent termination clearances from windows or

openings into a building structure as tested in the A.G.A. field reports C-FT-5-90, C-FT-8-90, FT-C-

12-93, FT-C-13-93, FT-C-14-92 and the SBCCI letter dated May 24, 1990.

INSTALLATION GUIDE LINES

1. The maximum gas water heater appliance to be operated in a Aquahut®enclosure: up to 90,000

BTU/HR input.

2. Two (2) make up/combustion air openings into the Aquahut®enclosure shall be installed. Each

opening size shall be based on one (1) square inch per 4000 BTU/HR. The vent termination shall

have the following clearance distances.

a. AH40 Model Aquahut®

14” from combustible exterior wall to center of vent cap

b. AH50 Model Aquahut®

16” from combustible exterior wall to center of vent cap

c. A minimum of 12” from any window or opening into the main building structure

d. A minimum of 18” below an eave or overhang

STAR-KAP™ INSTALLATION

1. Before installation, apply two (2) beads of high

temperature silicone sealant or equivalent around

the bottom of the storm collar and one (1) inch

above the end of the Star-Kap™ body. (See

Figure 1)

2. Insert the Star-Kap™ into the inside of the single

wall vent pipe, making sure the Star-Kap™ is

seated against the storm collar. Fasten the Star-

Kap™ to the single wall vent pipe, by using

three (3) sheet metal screws. Placement of the

screws should be approximately 1/2 inch from

the end of the single wall vent pipe. The heads

of the screws should be covered with high

temperature silicone or equivalent.

Figure 1

P/N 46263400 Rev D 11/00